Thursday, July 25, 2024
HomePopularHow To Make A Cobblestone Generator In Minecraft

How To Make A Cobblestone Generator In Minecraft

S For Making An Infinite Cobblestone Generator In Minecraft

How To Make a Cobblestone Generator in Minecraft

Gather your materials. You will need 3 iron for a bucket, a lava fountain and a water fountain. Extract iron underground or look for it in the walls of a cave. Melt the iron in a furnace and then make a bucket. Lava sometimes appears in puddles on the surface, but you will need to go underground below Y: 9 for it to be common.

Create two buckets if you want to load lava and water at the same time.

Some cobblestones can be used to reduce the chance of the generated cobblestones falling into the lava.

If you are playing SkyBlock, you may have an ice pack instead of a bucket of water. You can put the ice and break it to get water.

Dig a hole a block deep and a hole two blocks deep next to it. Place the water in a deep block hole so that it flows into the two-block hole.

If the water turns the lava into obsidian, you may not need to dig the second hole two blocks deeper.

Leave a gap in one block and dig another hole with a depth block. Put your lava here.

Break the block that separates the lava and the water. After about a second, there will be a hissing noise and a cobblestone block will be formed.

Keep breaking the cobblestone. The generator will continue to produce infinite amounts of cobblestones.

Does A Blast Furnace Smell Cobblestones Faster

Yes, blast furnaces can melt cobblestones faster at twice the speed than normal furnaces. The blast furnace uses twice the amount of fuel, works at twice the speed, and can melt cobblestones faster. Not only is it there to melt sand, nether, and just ores, but it can also smell cobblestones at a faster rate. If the normal oven does not work quickly, they are replaced by bast ovens.

Lets Have The Cobblestone Generator Upgrade

The players will find out that there will be no easy and speedy way to have the farming cobblestone automatically. But do not worry, since you can have a really quick process.

You just simply need to follow the method of building the simple cobblestone generator and extend it based on the condition which is happening at that time.

It is possible that you have to provide more lava and water during this process and usually it depends on the length of the extended generator that you have made.

For the last process, you can always create the auto clicker AFK Farm by arranging the hoppers to be kept under the cobblestone spawns. Do not forget that you also have to create the route which connects directly to the chest below.

This action will help you to get more cobblestones, as well as having a clean and neat inventory. You can follow these steps of how to make a cobblestone generator in Minecraft easily.

Read Also: How Do You Craft A Crossbow In Minecraft

S To Make A Cobblestone Generator

Step-1: Find a good place near your house. Make sure it is near so that you dont have to go so far for it.

Step-2: Dig a rectangular shaped box as shown below.

Step-3: On the extreme left, right-click by holding a water bucket in hand. Or else, you can also put an ice block. Place an ice block and break it to get water.

Step-4: Afterwards, place a lava bucket on the extreme right side.

Tip You can go to the nether world or dig till the bottom to find lava. After finding lava, right-click on it by holding an empty bucket in hand.

Step-5: If you have done everything correctly, then cobblestone will appear in the centre.

Step-6: You can break it with any pickaxe. After breaking it will spawn again automatically.

What Is The Mechanism Of The Cobblestone Generator


The mechanism of the cobblestone generator is simple and easy. Spot water in a long channel and the magma is on the opposite side of the channel. Let both fluids meet at the end and it will make your product which is cobblestone. Allow your stone to chill off for quite a while and afterward eliminate it from that point. At that point rehash this system to get new cobblestone. It is very simple to make cobblestone, once you have understood the mechanism of the Cobblestone generator.

Also Check: How To Get Brown Dye Minecraft

How To Make Cobblestone Generator In Minecraft

In a Nutshell:

To make a cobblestone generator, dig a 1×4 rectangular trench with the second block from the proper side being 2 layers deep rather than the traditional one. Then add water/ice on top of the block furthest to the proper of the ditch, finally, add lava on top of the block furthest left of the trench. A block of cobblestone should automatically spawn upon this placement.

So You Want To Know How To Make A Cobblestone Generator In Minecraft

You can get the information from the video below. This game is not just limited to one kind of cobblestone. There are many cobblestone generators out there that will be very useful for different situations and plots. With enough research, you should be able to find several different ways to make a cobblestone generator in Minecraft.

It is important to note that there is some assembly required in order to get started with how to make a cobblestone generator in Minecraft. However, I have found that the effort is well worth it. After you have completed this task, you will then have the satisfaction of knowing that you made something by yourself using only Minecraft blocks. This can be a great feeling of accomplishment! Once you understand how to make a cobblestone generator in MineCraft, you will never look at cobblestone the same way again!

If you do not know how to make a cobblestone generator in Minecraft, here are some things that you should know about this machine that is commonly used by MineCraft players. Cobblestone generators are essentially the Cobblestones that you see on older versions of Minecraft. In todays version, they are in actuality a sheet of metal that is rolled into cobblestone when dropped onto a surface.

Don’t Miss: How To Make Chiseled Stone Brick

Making A Cobblestone Generator In Survival Mode

In Minecraft cobblestone is created when lava comes into contact with water.

The basic principle of a cobblestone generator is to create the conditions where the two substances can meet and then collect the resulting cobblestone.

There are many different ways to achieve this, but the simplest way is to dig a four-block long trench with a one-block gap in the middle. Then place water in the end closest to the hole and a lava block at the other end. This then creates a cobblestone where the two flowing materials meet.

When you are making cobblestones its important not to let the water touch the lava source block or it will be destroyed and turned into an obsidian block.

What Is The Use Of Cobblestone

Minecraft EASY Automatic Cobblestone Generator Tutorial!

Cobblestone is one type of block that is used to make walls, base etc. It looks grey in colour. Out of it, you can make cobblestone slab, stone etc. Making a house of cobblestones requires too much Cobblestone.

You need to travel to find cobblestone. Instead, you can make a generator beside your home. This will save you a lot of time. Read this article further to find the steps of making a Cobblestone Generator.

You May Like: How To Make A Wither Banner In Minecraft

Digging Your First Hole

You can build your cobblestone generator on any surface that you want. As long as you can dig 2 blocks down without any issues, then you can place your cobblestone generator there.

To begin with, you will need to dig a hole that is five blocks long and one block wide. You can make it slightly longer if you want, but there isnt really any need beyond aesthetics.

How To Create An Infinite Lava Source

IF you want to create an endless lava source, all you need to do is take 4 buckets of lava. 4 buckets of lava are enough to obtain an infinite source. You need to dig a cross shaped block at this point where you want the lava source. Pour 4 buckets of lava into this cross-shaped block and let them flow at a time. This stream will make a magma pool in the focal point of the cross. This lava pool is sufficient as a .

Also Check: How To Get Bonemeal In Minecraft

What You Need For A Cobblestone Generator

In Minecraft, cobblestone is generated when water is close to lava, but not touching it. If the water touches the lava, you get Obsidian instead. This means that in order to make a cobblestone generator, you will need the following:

  • A bucket of lava
  • A bucket of water

You will also need your tools to dig some holes.

Yes. There are far more elaborate cobblestone generators than the one that we detail here. However, you dont really need those. A bucket of lava, a bucket of water, and some well-placed holes should be more than enough to give you unlimited cobblestone.

Required Foundation To Make A Cobblestone Generator:

Double cobblestone generator : Minecraft
  • After gathering all the required materials start by digging one block deep hole and 2 blocks deep hole next to it.
  • Then make a one-block deep hole leaving one block next to the two blocks deep hole.
  • Now place water over the first block you dug down.
  • Then place lava in the last block which you mined.
  • Then mine a block diagonally between lava block and 2 blocks deep hole.
  • Done!! Now to start this generator all you have to do is mine the block between lava and 2 blocks deep hole. After mining, a new cobblestone block will generate as soon as flowing lava will come in contact with flowing water.
  • Now further continuing with mining cobblestone block a new cobblestone will generate every time making it possible to call it an infinite cobblestone generator.

Extra cobblestone generator tips for skyblock players:

  • If youre playing skyblock youll get Ice blocks instead of a water bucket in your chest. All youve to do is place Ice blocks in place of water while making a cobblestone generator.
  • Make sure to dig the second hole 2 blocks dip. In the opposite case, an obsidian block will get generated which will take a long time to break. This small mistake can ruin youll whole skyblock. Because without cobblestone generator skyblock is incomplete theres nothing youd be able to do after that.
Cobblestone generator improvement tips:
  • You can improve your cobblestone generator by placing blocks above lava and water to prevent frequent burning of cobblestones while mining.

You May Like: How To Make Blue Flames In Minecraft

How To Make A Cobblestone Generator

Minecraft players should be in the overworld in order to complete this design as it can’t exist in the nether. Step one requires players to dig five spaces into the ground in a line. This can be completed without digging if players want to surround five empty spaces with blocks that both stop water and won’t burn when exposed to lava.

The next step has players dig one step deeper on the second spot from the right. Water will be coming from the right side and it needs to flow into this deeper spot in order for the cobblestone generator to work. Water works in odd ways in Minecraft and missing this step can leave players with a useless design. After this hole is dug, players need to dump the water bucket into the farthest right spot. This new water source should flow to the left and into the hole the player just made.

Once complete, players only need to add in the bucket of lava on the far left side. This lava will flow to the right and collide with the water in the middle space. This produces a block of cobblestone. With this step, the cobblestone generator is complete. Players should be able to mine the block of cobblestone and, once it disappears, a new one should emerge. This is an infinite loop and, therefore, a forever supply of cobblestone. A relatively straightforward design safe for most any Minecraft base.

Minecraft is available now on Mobile, PC, PlayStation 4, Switch, and Xbox One.

The Basic Concepts Of A Minecraft Cobblestone Generator

To make a cobblestone generator, you need to use the interaction between flowing lava and water. When water comes in contact with a space occupied by flowing lava in Minecraft, it creates a cobblestone block.

However, if water hits a source block of lava, it creates obsidian, destroying the source. Vice versa, if lava hits a water source block, it evaporates the source. To solve this problem, we use the fact that water and lava only flow at certain speeds and distances to our advantage.

Related: How to Make a Nether Wart farm in Minecraft

Water will flow seven blocks from its source. However, lava will only flow three blocks. We use this knowledge to create a 12 block long canal for both materials to flow along. After placing them both at opposite ends, a cobblestone block will be formed in the middle.

Mine the cobblestone block, and another will almost instantly be formed. Youve now completed your first cobblestone generator!

Also Check: How To Change Minecraft Username 2017

What To Build In Minecraft Generator

Minecraft Obsidian Generator Materials Water Holder. This will work in almost any size, as long as it contains water. One block high will do. Lava Holder. It needs to be right next to the water holder, with only one row of blocks separating the two. Usage. To use, destroy one of the blocks separating the water from the step. Thanks! The pics arent perfect but thanks for viewing!

How To Create A Simple Cobblestone Generator In Minecraft


Dig a 6×1 hole.

Dig one block down on the 3rd block to the left.

Now place down a water source on the far right. The end of the water source should fall down into the hole.

Finally, you place down a lava source on the far left and shortly after, a cobblestone should appear on the 2nd block to the left.

Dig a hole right next to the cobblestone so when you mine the cobblestone, you can safely retrieve cobblestone without having the risk of being burned by the lava.

Congratulations! Now go and enjoy your useful cobblestone generator!

Recommended Reading: Minecraft Purple Banner Designs

Mining At The Cobblestone Generator

If you have done things properly, a cobblestone block should appear in the center of your cobblestone generator.

If you mine this cobblestone block, a new one should appear in its place. Congratulations, you now have unlimited cobblestone!

Some people like to build a small extra pit next to the cobblestone block to make it easier to mine, but this isnt really necessary.

When the new cobblestone block is generated, it should push the previously mined cobblestone block directly into your inventory

What Is The Obsidian Risk

When generating cobblestones from the cobblestone generator. You need to be careful that your flowing water stream does not touch the lava source. Because if water touches the lava acid, no results will be achieved and you will not get cobblestones. Instead, it turns into obsidian. This is the risk of obsidian in Minecraft.

Also Check: Chiseled Stone Bricks Recipe

Material That Is Required For Cobblestone Generator

As we all know that for making something we need material. Similarly, in the case of Cobblestone Generator, we need material so that we can build our generator.

  • Three iron for the bucket: You will need three iron. You can find the iron underground or in the walls of the cave. Then melt the iron in the furnace and give the shape of the bucket.
  • A Source of Lava: Sometimes, Lava seems in the pool on the surface. But the important thing is that you will need to go underground Y:9 for them.
  • A Source of Water: You can find a source of water in Minecraft for Cobblestone Generator.


  • To spare your time, you can create two buckets so that you could hold lava and water at a time.
  • You can use ice rather than a water bucket. For this, break the ice and get it into water.
  • Materials Required To Make A Cobblestone Generator:

    How to Make a Dual Cobblestone Generator in Minecraft: 14 ...

    Primary materials:

    • 3 iron ingots
    • Lava source
    • Water source

    You can find iron anywhere by mining underground or on the walls of caves. Mine them using a stone pickaxe to get iron ore. Then you can smelt it in a furnace. The Furnace is very easy to craft. It requires only 8 cobblestones. Start by placing cobblestones in the crafting table menu leaving the middlemost slot. After crafting furnace place an iron ore in the upper slot of the furnace menu and coal/wood/logs or any other fuel source in the lower slot of the furnace menu. Give it some time and it will generate iron ingot for you.

    You can find lava sources anywhere in the caves or mineshaft. You can also find it in any ravine or cliffs. You can also find them in the form of a pool on the surface level. If youre in the desert youve high chances to find lava pool on the surface level. If youre still having difficulty finding lava then nether is the best option for you.

    You can find water almost everywhere in Minecraft in the overworld.

    Secondary materials:

    • Bucket

    In order to transport lava or water with you, youre going to require a bucket. You can craft buckets very easily using 3 iron ingot. Refer the following image to craft a bucket in Minecraft.

    Read Also: How To Keep Inventory In Minecraft Ps4


    Most Popular