Four: Add Multiple Floors
If you wish to add multiple floors to your base, you can easily modify this elevator to accommodate for that. Make a two-by-two hole where you want the level to be and place signs outside the elevator like you did on the ground floor. While you’re going up or down, walk out where you made that floor’s exit. This is an easy way to go to a specific floor in your base!
Creating The Floating Text
Now that we got the permissions out of the way lets actually create the floating text! Make sure youre on Minecraft Java Edition 1.15 or 1.16 for this to work.
The trick is to create an invisible and indestructible armor stand that is not affected by gravity with a custom, colored name, and make that name visible.
We can create such an armor stand with those parameters using Minecrafts built-in summon command like this:
/summon armor_stand ~ ~ ~ ",CustomNameVisible:1b}
Make sure to replace Your Text Here with your desired text. You can also replace green with your desired color. You can find a list of valid color codes at the bottom of this article.
Note that this will spawn the floating text right in front of you. If youre not happy with the location, you can remove the text and try again or use another method to place text more precisely. Read on to know how!
Example In Ps4 Edition
To fill a 8x1x8 area with bedrock in Minecraft PS4 Edition:
/fill ~-3 ~-1 ~-3 ~4 ~-1 ~4 bedrock 0
To build a solid structure out of polished granite:
/fill ~1 ~0 ~1 ~10 ~10 ~10 stone 2
To build a large hollow dark prismarine structure :
/fill ~1 ~-1 ~1 ~10 ~5 ~10 prismarine 1 hollow
To mine a region, by replacing all blocks in the area with sand starting 7 blocks deep up to ground level , that is 3 blocks away from you in all horizontal directions:
/fill ~-3 ~-7 ~-3 ~3 ~-1 ~3 sand 0 destroy
To replace all grass blocks with diamond blocks in the fill region with a starting coordinate of ~5 ~ ~8 and an ending coordinate of ~-20 ~-1 ~-20:
/fill ~5 ~ ~8 ~-20 ~-1 ~-20 diamond_block 0 replace grass 0
Don’t Miss: Minecraft Smite Vs Sharpness
S To Make A Water Elevator In Minecraft
Depending upon the base block used, Water Elevators can be used in making the move up or move down. If you are looking for an elevator that should go up then the soul sand block must be placed at the bottom. But if you are looking for an elevator to go down then you can use some magma block in making the base.
Whats A Submerged Village In Minecraft
Submerged villages are another category in Minecraft. Read on as I explain more about submerged villages and their inhabitants.
Submerged villages are spawn in the deep ocean biomes and mimic the style of builds in ruins. They are fully built paths, lanterns, waterlogged blocks, and coral reefs, among others. The primary inhabitant of submerged villages are Gillagers, who carry loot in the special chest.
Gillagers resemble mermaids, and, like Endermites, Endermen Skeles and wolves hunt the drowned. If they get a chance to spawn around ruins and wrecks, they can become dolphin jockeys and start mounting and dismounting.
Read Also: How To Grab Everything In A Chest In Minecraft
How To Make A Bubble Elevator In Minecraft
Also known as a water elevator!
Begin making your Bubble elevator by getting the essential objects: two Soul Sand, two Magma Blocks, and at least two Water Buckets. The Soul Sand creates bubbles in your water elevator that make you move up, and the Magma Block creates bubbles in your water elevator that make you go down.
In the guide below, we used glass to create the sides of our elevator, but you can use whatever building tools you’d like. The Soul Sand is necessary to make the up current for the elevator, and the Magma Blocks are necessary to make the down current. Having two Water Buckets isn’t required, but eliminates the need to make multiple trips. Follow the steps below to complete the elevator.
Related: How to Move Villagers in Minecraft – Pro Game Guides
Fill Command In Minecraft Java Edition
In Minecraft Java Edition 1.13, 1.14, 1.15, 1.16, 1.17 and 1.18, there are 2 syntaxes for the /fill command.
To fill a region with a type of block:
/fill < from> < to> < block>
To replace one type of block in a region with another type of block:
/fill < from> < to> < block> replace < newTileName>
In Minecraft Java Edition 1.8, 1.9, 1.10, 1.11 and 1.12, there are 2 syntaxes for the /fill command.
To fill a region with a type of block:
/fill < x1> < y1> < z1> < x2> < y2> < z2> < block>
To replace one type of block in a region with another type of block:
/fill < x1> < y1> < z1> < x2> < y2> < z2> < block> replace < newTileName>
Definitions
Recommended Reading: What’s A Cauldron In Minecraft
Minecraft Player Uses Powered Rails & Bubbles To Travel Across Water
A unique setup of a minecart, waterlogged powered rails, and underwater Soul Sand enables travel across the surface of any body of water in Minecraft.
One inventive Minecraft player has figured out how to make a physics-defying minecart roller coaster out of powered rails and underwater bubbles. For players looking to traverse Minecraft‘s often expansive bodies of water, this method may be one of the most creative, instead of the generic alternative of just using a wooden boat.
Inspired methods of movement have continuously been of interest to the Minecraft community. Compared to the freedom of flight in the game’s creative mode, the grounded sprint in survival mode is rather underwhelming, leading players to try a variety of methods for crossing Minecraft‘s infinite tracts of land. One of the best-known examples involves using a boat across lines of ice blocks to rack up extreme momentum. There have been numerous official means of quick travel built into the game to scratch player’s itch for quick travel, including Nether traversal, Ender Pearl teleportation, and Elytra flight.
Related: How to Unlock Soul Speed Enchantment in Minecraft
Fill Command In Minecraft Xbox One Edition
In Minecraft Xbox One Edition, there are 2 syntaxes for the /fill command.
To fill a region with a type of block:
/fill < from> < to> < tileName>
To replace one type of block in a region with another type of block:
/fill < from> < to> < tileName> replace < replaceTileName> < replaceDataValue>
Definitions
- from is the starting x y z coordinate for the fill region .
- to is the ending x y z coordinate for the fill region .
- tileName is name of the block to fill the region.
- tileData is optional. It is the data type or variation of the block if more than one type exists for that tileName.
- replace will replace all blocks in the fill region, including air.
- outline is optional. It will replace blocks on the outer edge of the fill region, but does not replace the inner blocks.
- hollow is optional. It will replace blocks on the outer edge of the fill region, and replaces inner blocks with air.
- keep is optional. It will replace only air blocks in the fill region.
- destroy is optional. It will replace all blocks in the fill region, including air. Replaced blocks will be dropped and can then be collected as if they were mined with a pickaxe or shovel.
- replaceTileName is the name of the block that will be replaced.
- replaceDataValue is the variation of the block to be replaced if more than one type exists for that replaceTileName.
Read Also: Minecraft Dragon Head Blueprints
Axolotls Can Be Bred With A Bucket Of Tropical Fish
Breeding axolotl is quite a simple process as well. You’ll need to get at least two of them at the same location and then grab a bunch of tropical fish into a bucket. This actually makes the axolotl the first mob that must be bred using items that can’t be stacked.
Just like with other mobs, simply right-click with a bucket of tropical fish on both axolotls and the hearts will appear. A baby axolotl will be born, and it will take about 20 minutes for it to grow into an adult.
Until then, a baby will always follow around its parents. Usually, a baby will inherit the color of one of its parents, but it’s possible for a baby to have the rare blue color as well.
How To Make A Potion Of Water Breathing In Minecraft
This Minecraft tutorial explains how to craft a Potion of Water Breathing with screenshots and step-by-step instructions.
In Minecraft, you can brew a Potion of Water Breathing and add it to your inventory. When this potion is drank, it will give you the and the ability to breathe under water for 3 minutes.
Let’s explore how to make this potion.
A Potion of Water Breathing is available in the following versions of Minecraft:
| Platform |
|---|
| Yes |
* The version that it was added or removed, if applicable.NOTE: Pocket Edition , Xbox One, PS4, Nintendo Switch, and Windows 10 Edition are now called Bedrock Edition. We will continue to show them individually for version history.
Also Check: Can I Use A Controller On Minecraft Pc
Blue Axolotls Are Special
Speaking of blue axolotls, they’re incredibly special in several ways. First of all, they’re the rarest type of axolotl color. Only about one in 1200 axolotl will have this coloration in Minecraft, making it an extremely lucky find if discovered in the wild.
- This number was used because 1200 is actually the current estimated number of remaining axolotls in the real world.
The blue coloration was also suggested on Reddit by a user named Darkiceflame, and Mojang took this suggestion to heart and decided to make a very special version of the regular axolotl.
Fill Command In Minecraft Pocket Edition
In Minecraft Pocket Edition , there are 2 syntaxes for the /fill command.
To fill a region with a type of block:
/fill < from> < to> < tileName>
To replace one type of block in a region with another type of block:
/fill < from> < to> < tileName> replace < replaceTileName> < replaceDataValue>
Definitions
- from is the starting x y z coordinate for the fill region .
- to is the ending x y z coordinate for the fill region .
- tileName is name of the block to fill the region.
- tileData is optional. It is the data type or variation of the block if more than one type exists for that tileName.
- replace will replace all blocks in the fill region, including air.
- outline is optional. It will replace blocks on the outer edge of the fill region, but does not replace the inner blocks.
- hollow is optional. It will replace blocks on the outer edge of the fill region, and replaces inner blocks with air.
- keep is optional. It will replace only air blocks in the fill region.
- destroy is optional. It will replace all blocks in the fill region, including air. Replaced blocks will be dropped and can then be collected as if they were mined with a pickaxe or shovel.
- replaceTileName is the name of the block that will be replaced.
- replaceDataValue is the variation of the block to be replaced if more than one type exists for that replaceTileName.
Don’t Miss: Minecraft Chiseled Sandstone Recipe
How Can A Player Breathe Underwater
If you have ever wondered how to breathe underwater in Minecraft, do not worry.
Here, I will describe some effective water-breathing methods that support all available Minecraft platforms.
You may extend your underwater time in Minecraft in a variety of ways. Some have a longer life span than others. This tutorial will show you how to breathe underwater using all of the available tools and resources in Minecraft.
Here are the steps to breathe underwater in Minecraft:
Axolotls Can Be Captured With A Bucket Or Lead
Axolotls are not very hard to capture at all. The difficulty is finding some in the first place. Grab a bucket or a lead if you’ve found a spot where a bunch of them have spawned, and approach the axolotl.
RELATED: Minecraft: Everything You Need To Know About Smelting
Using a lead on an axolotl will make it follow you around, but using a bucket on one allows you to transport axolotl easily even across dry land without exposing it too much to drought. If you need to bring your axolotl far away, make sure to use a bucket instead to avoid killing it. Leads are more useful when leading the axolotl to battle against guardians and elder guardians in an ocean monument.
Recommended Reading: Unique Banner Designs Minecraft
Solution : Splash/lingering Potion Of Water Breathing
Splash and lingering water-breathing potions both help the character in Minecraft breathe underwater.
Instead of absorbing the splash potion, you need to throw it down giving anyone in that radius to buff.
For the splash potion, you need to have a standard water-breathing potion and gun powder.
While the lingering potion creates a small cloud where you can walk to receive the buff or breathe underwater.
The lingering potion is made up of a splash water-breathing potion and dragons breath which will come when you will defeat the ender dragon.
Lastly, you can extend the breathing time by combining these potions with a Redstone.
Remember that using these two water-breathing potions destroy glass bottle.
Follow the next solution for more on how to breathe underwater in Minecraft.
How To Breathe Underwater In Minecraft
The simplest way to ensure underwater air intake in Minecraft is through the use of Potions of Water Breathing. It is crafted in a brewing stand using Nether Wart on a water bottle to create an Awkward Potion before including a pufferfish into the mix to form the required potion.
This potion keeps the air bubble meter from depleting for three minutes . However, players who may not have a brewing stand aren’t likely to make enough potions to last a significant amount of time underwater.
However, thanks to a few other methods, Minecraft players can still survive underwater with the tactful use of certain items or decorations. An outline of these methods can be found below:
Java Edition
- Placing an ordinary door underwater will create a column of air behind it, which players can step into to replenish their air meter.
- Stacking two fence gates on top of each other and opening them also creates an air column. Since the gates are open, players can step into them to restore their air.
- In a similar fashion to fence gates, stacking two banners atop each other will also create an air column that players can step inside of.
Bedrock Edition
Recommended Reading: How To Get Hardened Clay In Minecraft
How Do You Get Villagers Under Water
An underwater home has pros and cons and setting these at a balance is crucial for your villagers to survive. I will help you know how to get your villagers underwater.
If you want villagers underwater to lead a normal life, you will need skylights to build houses for them. You could also create a drop chute next to one of the skylights and have water source blocks to cushion their fall and prevent damage. Also, the underwater residence is immune to explosions, and mobs have difficulties attacking such due to the high level of protection.
On the other hand, the sea poses movement challenges, reduced mining speed, challenges in breathing when working, water flooding the structures, and special measures have to be in place for smooth movement.
However, a player can improve their movement and mining speed by wearing an Aqua Affinity helmet. This helmet increases their mining speed with a max tier of 1. They should also equip themselves with a Depth strider that increases their movement speed with a max tier of 3.
When building underwater, it will be simpler and safer if a player wears a Respiration enchanted helmet. They should also have Potions of water breathings. The Respiration extends the duration one can hold their breath but does not give true underwater breathing. Alternatively, use a conduit to solve the breathing problem entirely instead of the Respiration, which does not provide adequate time for work.
Use Splash Water Breathing Potion
Splash water-breathing potion is another underwater breathing technique. This technique allows the player to breathe underwater in Minecraft.
The splash potion is also helpful to your friends more extended breathing. If you drop it down, splash potion helps everyone inside a certain radius.
To create a splash water-breathing potion is very easy. You just need a standard water-breathing potion and gun powder to make a splash potion. Combining splash potions with a Redstone allows you to expand your breathing duration.
Its important to remember that using splash water-breathing potions destroys your glass bottle.
Also, check our exclusive tutorial on making grey concrete in Minecraft.
Don’t Miss: 1.14 Sugar Cane Farm
Placing The Base Block
Now it is time to place the base block according to the type of elevator. If you want then a Redstone contraption can be used to swap the base blocks by using a button or any toggle method other than that as well.
The Water Elevator is Ready!
Once you have carried out the steps correctly then you will see bubbles in the water which is an indication that the water elevator is now functioning. Now you can use it for the purpose of transportation.
Read Also:13 Best Minecraft Mods You Must Try
How To Make Bubbles
This article was co-authored by wikiHow staff writer, Amber Crain. Amber Crain has been a member of wikiHows writing staff for the last six years. She graduated from the University of Houston where she majored in Classical Studies and minored in Painting. Before coming to wikiHow, she worked in a variety of industries including marketing, education, and music journalism. She’s been a radio DJ for 10+ years and currently DJs a biweekly music program on the award-winning internet radio station DKFM. Her work at wikiHow supports her lifelong passion for learning and her belief that knowledge belongs to anyone who desires to seek it.The wikiHow Video Team also followed the article’s instructions and verified that they work. This article has been viewed 173,199 times.Learn more…
Making bubbles is so fun and easy to do! Start by buying a premixed bubble solution or whip up your own solution using common household ingredients. Choose or create a bubble wand in the shape and size you like best and submerge the end in the bubble solution. If you’re using a smaller wand, just hold it up to your mouth to blow small bubbles. You can wave large wands through the air to create huge bubbles!
You May Like: Minecraft Mushroom Light Level