Wednesday, February 1, 2023
HomeNewsHow To Set Spawn Point In Minecraft With Command Block

How To Set Spawn Point In Minecraft With Command Block

Setblock Command In Minecraft Xbox One Edition

Command Block Tutorial | Setting Player Spawnpoint ( Minecraft 1.9.4, 1.10 or greater)

In Minecraft Xbox One Edition, the syntax to replace a block with another block is:

/setblock < position> < tileName>   

Definitions

  • position is the x y z coordinate for the block to replace.
  • tileName is name of the replacement block.
  • tileData is optional. It is the data value for the replacement block. It identifies the variation of the block if more than one type exists for that tileName.
  • replace is optional. It tells the command to replace the block, including air. This is the default behavior.
  • keep is optional. It tells the command to replace the block if the block was air.
  • destroy is optional. It tells the command to replace the block, including air. The old block will be dropped and can then be collected as if it was mined with a pickaxe or shovel.

Example In Java Edition 111 And 112

To replace a block that is 1 block East and 1 block South with a birch wood plank in Minecraft 1.11 and 1.12:

/setblock ~1 ~0 ~1 planks 2

To replace the block beneath you with a diamond block:

/setblock ~ ~-1 ~ diamond_block

To replace the block at the coordinates with obsidian:

/setblock -126 65 229 obsidian

Teleport Command In Minecraft Education Edition

In Minecraft Education Edition, there are different syntaxes depending on who or where you are teleporting.

To teleport to a set of coordinates:

/tp < x> < y> < z>   

To teleport to a set of coordinates facing the direction of another set of coordinates:

/tp < x> < y> < z>  facing < lookAtPosition> 

To teleport to a set of coordinates facing the direction of a target entity:

/tp < x> < y> < z>  facing < lookAtEntity> 

To teleport a target to a set of coordinates:

/tp < victim> < x> < y> < z>   

To teleport a target to a set of coordinates facing the direction of another set of coordinates:

/tp < victim> < x> < y> < z>  facing < lookAtPosition> 

To teleport a target to a set of coordinates facing the direction of a target entity:

/tp < victim> < x> < y> < z>  facing < lookAtEntity> 

To teleport to the location of another target:

/tp < destination> 

To teleport a target to the location of another target:

/tp < victim> < destination> 

You May Like: Attract Sheep Minecraft

Spawnpoint Command In Minecraft Education Edition

In Minecraft Education Edition, the syntax to reset the spawn point for a player to a new location is:

/spawnpoint  

Definitions

  • player is optional. It is the name of a player whose spawn point you wish to change. If you don’t specify a player, the spawn point for the player running the command will be changed.
  • spawnPos is optional. It is the to use for the spawnpoint. If you don’t specify a coordinate, the command will use your current position in the game.

Summon Command In Minecraft Pocket Edition

minecraft commands

In Minecraft Pocket Edition 1.16, the syntax to summon an entity is:

/summon < entityType>    
/summon < entityType> < nameTag>  

In Minecraft Pocket Edition 1.12, 1.13 and 1.14, the syntax to summon an entity is:

/summon < entityType>   

In Minecraft Pocket Edition 1.11.4 and older, the syntax to summon an entity is:

/summon < entityType>  

Definitions

  • entityType is the name of the entity to summon. .
  • spawnPos is optional . It is the where the entity should spawn. If no coordinate is specified, the entity will spawn in the current location.
  • spawnEvent is optional. It is the name of a game event for the entity. .
  • nameTag is the custom name to assign to the entity. It will appear as a nametag above the entity.

Don’t Miss: Coolest Banner Designs Minecraft

How To Set Spawn In Minecraft

May 21, 2021 ·This command will set a Minecraft worlds spawn point to the current location of the player who issued the command. This must be used in-game and can only be done by a server operator. When used with coordinates X, Y, and Z, the spawn point will be changed to the specified coordinates.

How To Use The Summon Command In Minecraft

How to Enter the Command 1. Open the Chat Window. The easiest way to run a command in Minecraft is within the chat window. The game control to open the chat window depends on the version of Minecraft:. For Java Edition , press the T key to open the chat window. For Pocket Edition , tap on the chat button at the top of the screen. For Xbox One, press the D-Pad on the …

Don’t Miss: What Is The Random Tick Speed In Minecraft

How Do You Set A Permanent Spawn Point On A Server

  • #1Dec 8, 2016
  • Posts:6
  • Member Details

I have spent the past 3 weeks building a huge and awesome spawn for my server, but now when I test the spawn with the /kill command I spawn nowhere near where I am supposed to. It is always around 15 blocks away, and I spawn on either the trees or the roof on a building and not where I am supposed to. I have done /setworldspawn where I want the spawn to be, and I also have worldguard, but nothing is working. On all the other servers I play on you spawn in an exact location, not randomly like what is happening on my server. It’s very frustrating. Is there something I am doing wrong?

  • Posts:11,275
  • Member Details

Yeah the default spawn is in a random spot within about 15 blocks of the coordinates you set. As Hexalobular indicates you can change that to a single block.

  • Posts:6
  • Member Details

I just tried that, but now players spawn in the void after they die. The spawn itself is a large island so I have no idea what to do. I am honestly about to give up and just start over.

  • Minecraft:Cookiehook
  • Member Details

Use /setworldspawn to set the precise co-ordinate of where you want the world spawn point to be. Then set /gamerule spawnRadius 0 to force players to spawn at that precise block.

  • Location:You don’t need to know.
  • Minecraft:TheMeowCat50

Setblock Command In Minecraft Java Edition

How to set a spawn point in Minecraft Bedrock with Command Blocks

In Minecraft Java Edition 1.13, 1.14, 1.15 and 1.16, the syntax to replace a block with another block is:

/setblock < pos> < block>  

In Minecraft Java Edition 1.8, 1.9, 1.10, 1.11 and 1.12, the syntax to replace a block with another block is:

/setblock < x> < y> < z> < tileName>    

Definitions

  • pos or x y z is the for the block to replace.
  • tileName is name of the replacement block.
  • dataValue is optional. It is the variation of the block if more than one type exists for that tileName.
  • oldBlockHandling is optional. It tells the command how to replace the block. The default behavior is replace. It can be one of the following values:
  • replace – Replaces the block, including air.
  • keep – Replaces the block if the block was air.
  • destroy – Replaces the block, including air. Old block will be dropped and can then be collected as if it was mined with a pickaxe or shovel.
  • dataTag is optional. It is the for the new block. It is a compound NBT tag such as .
  • Recommended Reading: How To Make Beetroot Stew In Minecraft

    How Do You Make Team Spawn Points

    How do I create a random team chooser for Minecraft?answers helped me out a lot with my KitPVP Teams map but I have one more thing I need to do. I have to make the teams spawn in different areas. In more detail, I need command blocks to tp you to your team’s spawn point when you join the team. I’ve tried having two command blocks set to impulseunconditionalAlwaysActive that have the command:

    
    

    This isn’t working and I can’t think of anything else that would work. Changing it to repeat would make you frozen in the spawn point. Can anyone help with this?

    If you are using a button/pressure plate to toggle the command block then set the options to Impulse

    If it is being executed after another command block it needs to be set to ChainAlways Active

    Your command: /tp @a < x> < y> < z> uses the proper target selector.

    It sounds like you are new to command blocks. I highly recommend you visit the wiki pages for commands and command blocks, they contain lots of valuable information. I reference them a lot when building various command block creations.

    Spawnpoint Command In Minecraft Ps4 Edition

    In Minecraft PS4 Edition, the syntax to reset the spawn point for a player to a new location is:

    /spawnpoint  

    Definitions

    • player is optional. It is the name of a player whose spawn point you wish to change. If you don’t specify a player, the spawn point for the player running the command will be changed.
    • spawnPos is optional. It is the to use for the spawnpoint. If you don’t specify a coordinate, the command will use your current position in the game.

    Recommended Reading: How To Make Wood Stairs In Minecraft

    How To Set The World Spawn To A Single Block

    https://www.planetminecraft.com/blog/how-to-set…

    Nov 26, 2014 ·This concept allows you to create a spawn like you might know from a server. Posibilities:-all players spawn at a single block -effects like chat message, title, playsound, give items-send players to spawn when they rejoin-many more posibilities It is completely vanilla minecraft.

    Example In Education Edition

    Minecraft Command Respawn ~ Kristy Sherman

    To teleport to the location of TheEarthMover in Minecraft Education Edition:

    /tp TheEarthMover

    To teleport the player named DigMinecraft to the location of TheEarthMover:

    /tp DigMinecraft TheEarthMover

    To teleport the player named DigMinecraft to coordinates that are 6 blocks West and 10 blocks South of the current position:

    /tp DigMinecraft ~-6 ~ ~10

    Also Check: How To Get Free Minecraft Alts

    Tp Command In Minecraft Nintendo Switch Edition

    In Minecraft Nintendo Switch Edition, there are different syntaxes depending on who or where you are teleporting.

    To teleport to a set of coordinates:

    /tp < x> < y> < z>   

    To teleport to a set of coordinates facing the direction of another set of coordinates:

    /tp < x> < y> < z>  facing < lookAtPosition> 

    To teleport to a set of coordinates facing the direction of a target entity:

    /tp < x> < y> < z>  facing < lookAtEntity> 

    To teleport a target to a set of coordinates:

    /tp < victim> < x> < y> < z>   

    To teleport a target to a set of coordinates facing the direction of another set of coordinates:

    /tp < victim> < x> < y> < z>  facing < lookAtPosition> 

    To teleport a target to a set of coordinates facing the direction of a target entity:

    /tp < victim> < x> < y> < z>  facing < lookAtEntity> 

    To teleport to the location of another target:

    /tp < destination> 

    To teleport a target to the location of another target:

    /tp < victim> < destination> 
    • x y z is the coordinate to teleport to.
    • yRot is optional. It is the y-rotation of the entity after teleportation.
    • xRot is optional. It is the x-rotation of the entity after teleportation.
    • lookAtPositon is a set of x y z coordinates that the entity will face after being teleported.
    • lookAtEntity is the name of a player that the entity will face after being teleported.
    • victim is the name of a player to teleport.
    • destination is the name of a player to teleport to.

    Example In Nintendo Switch Edition

    To replace a block that is 9 blocks West and 2 blocks North with spruce planks in Minecraft Nintendo Switch Edition:

    /setblock ~-9 ~0 ~-2 planks 1

    To replace the block beneath you with purple glazed terracotta:

    /setblock ~ ~-1 ~ purple_glazed_terracotta

    To replace the block at the coordinates with a sea lantern:

    /setblock -7 62 29 sealantern

    Read Also: How To Get A Command Block In Minecraft Ps4

    Example In Ps4 Edition

    To replace a block that is 2 blocks West and 7 blocks South with orange concrete in Minecraft PS4 Edition:

    /setblock ~-2 ~0 ~7 concrete 1

    To replace the block beneath you with a honey block:

    /setblock ~ ~-1 ~ honey_block

    To replace the block at the coordinates with a honeycomb block:

    /setblock 10 64 -20 honeycomb_block

    How To Change Your Server Spawn Point

    how to set a spawn point in minecraft without a command block 2015

    Apr 17, 2021 ·On any Minecraft server you will be able to use the following two commands to change the server spawn point or your spawn point: /setworldspawn Sets the world’s spawn to the specified coordinates. If no coordinates are specified, the world spawn will be set to the executor’s current location.

    Read Also: How To Make A Grass Path In Minecraft

    It’s Bigger On The Inside

    This is a simple one, just have a system of teleporting command blocks at the entrance/exit of a place, and players can build the interior somewhere else, allowing them to cheat space restriction. .You can make the outside of the house be 8×10 m, and the inside of the house be 8×10 m.) Or, have the inside of the house 20Ã20 instead.

    Minecraft Guide: How Do I Set My Respawn Point In The Nether Update

    Since the dawn of the Nether, dying has been a massive risk. That’s because there was no way to set a respawn point, like there is in the Overworld. There, you sleep in a bed, and every death means appearing back in the comfort of your home, ready to head out again. In the Nether, beds explode with a violent intensity, and death is an uncertainty because the world’s default spawn is the respawn point. That’s all changing with the Nether Update.

    If you thought Mojang would just let you plop a bed down, though, you couldn’t be more wrong. Here’s how you can set your respawn point in the Nether.

    Also Check: How To Use A Controller On Minecraft Pc

    Tp Command In Minecraft Xbox One Edition

    In Minecraft Xbox One Edition, there are different syntaxes depending on who or where you are teleporting.

    To teleport to a set of coordinates:

    /tp < x> < y> < z>   

    To teleport to a set of coordinates facing the direction of another set of coordinates:

    /tp < x> < y> < z>  facing < lookAtPosition> 

    To teleport to a set of coordinates facing the direction of a target entity:

    /tp < x> < y> < z>  facing < lookAtEntity> 

    To teleport a target to a set of coordinates:

    /tp < victim> < x> < y> < z>   

    To teleport a target to a set of coordinates facing the direction of another set of coordinates:

    /tp < victim> < x> < y> < z>  facing < lookAtPosition> 

    To teleport a target to a set of coordinates facing the direction of a target entity:

    /tp < victim> < x> < y> < z>  facing < lookAtEntity> 

    To teleport to the location of another target:

    /tp < destination> 

    To teleport a target to the location of another target:

    /tp < victim> < destination> 
    • x y z is the coordinate to teleport to.
    • yRot is optional. It is the y-rotation of the entity after teleportation.
    • xRot is optional. It is the x-rotation of the entity after teleportation.
    • lookAtPositon is a set of x y z coordinates that the entity will face after being teleported.
    • lookAtEntity is the name of a player that the entity will face after being teleported.
    • victim is the name of a player to teleport.
    • destination is the name of a player to teleport to.

    Setblock Command In Minecraft Windows 10 Edition

    How to use Command Blocks to Spawn Mobs Just Once

    In Minecraft Windows 10 Edition, the syntax to replace a block with another block is:

    /setblock < position> < tileName>   

    Definitions

    • position is the x y z coordinate for the block to replace.
    • tileName is name of the replacement block.
    • tileData is optional. It is the data value for the replacement block. It identifies the variation of the block if more than one type exists for that tileName.
    • replace is optional. It tells the command to replace the block, including air. This is the default behavior.
    • keep is optional. It tells the command to replace the block if the block was air.
    • destroy is optional. It tells the command to replace the block, including air. The old block will be dropped and can then be collected as if it was mined with a pickaxe or shovel.

    Recommended Reading: Minecraft Realms Idle Kick

    Tp Command In Minecraft Java Edition

    In Minecraft Java Edition 1.13, 1.14, 1.15 and 1.16, there are different syntaxes depending on who or where you are teleporting.

    To teleport to a set of coordinates:

    /tp < location> 

    To teleport to the location of another target:

    /tp < destination> 

    To teleport a target to the location of another target:

    /tp < targets> < destination> 

    To teleport a target to a set of coordinates facing the direction of another set of coordinates:

    /tp < targets> < location>  facing < facingLocation> 

    To teleport a target to a set of coordinates and rotate the direction the target will be facing:

    /tp < targets> < location>  

    In Minecraft Java Edition 1.8, 1.9, 1.10, 1.11 and 1.12, there are different syntaxes depending on where you would like to teleport.

    To teleport to a set of coordinates:

    /tp  < x> < y> < z>  

    To teleport to another player:

    /tp  < destination player> 

    Definitions

    Summon Command In Minecraft Windows 10 Edition

    In Minecraft Windows 10 Edition 1.16, the syntax to summon an entity is:

    /summon < entityType>    
    /summon < entityType> < nameTag>  

    In Minecraft Windows 10 Edition 1.12, 1.13 and 1.14, the syntax to summon an entity is:

    /summon < entityType>   

    In Minecraft Windows 10 Edition 1.11.4 and older, the syntax to summon an entity is:

    /summon < entityType>  

    Definitions

    • entityType is the name of the entity to summon. .
    • spawnPos is optional . It is the where the entity should spawn. If no coordinate is specified, the entity will spawn in the current location.
    • spawnEvent is optional. It is the name of a game event for the entity. .
    • nameTag is the custom name to assign to the entity. It will appear as a nametag above the entity.

    Read Also: How To Set Tick Speed In Minecraft

    Summon Command In Minecraft Education Edition

    In Minecraft Education Edition 1.14.31, the syntax to summon an entity is:

    /summon < entityType>    
    /summon < entityType> < nameTag>  

    In Minecraft Education Edition 1.12, the syntax to summon an entity is:

    /summon < entityType>   

    In Minecraft Education Edition 1.9 and older, the syntax to summon an entity is:

    /summon < entityType>  
    • Edu

    More Commands In Fewer Command Blocks And Recursion

    Command Blocks tutorial #2 /spawnpoint the /setspawn substitute

    There are several ways to combine groups of commands into just one command.

    Use the following sets of commands for recursion:/scoreboard objectives add counter dummy/scoreboard players set target_count counter < target count> /execute if score count counter < target_count counter < chained command> /execute unless score count counter < target_count counter run scorebard objectives remove counter/scoreboard players add count counter 1

    To run multiple commands, summon a command-block minecart riding another command-block minecart riding another, with the commands in reverse order, on an activator rail. There are also commands called one-command tool that use this tactic.

    Don’t Miss: How To Make An Eye Banner In Minecraft

    RELATED ARTICLES

    Most Popular