Saturday, October 1, 2022
HomeExclusiveHow To Make A Big Hole In Minecraft

How To Make A Big Hole In Minecraft

How To: Deep Lake W/ Ease

How to make a giant hole (world edit) (minecraft pe) (Simple tutorial)

You can make a lake any depth with ease! All you do is dig out your lake. Then you do 1 layer of dirt where you want the water level to be. Fully cover the lake with the one block high layer and fill/overlap with water. Grab a diamond shovel and with ease you dig up the top and only layer of dirt as your lake fills with water. You can also add to an already made lake like this, and just add 1 layer of dirt blocks at water lvl and watch as the waterfall extends over your extended lake. Once again you dig out the layer of dirt once you’ve gotten the water to settle.

Fill Command In Minecraft Education Edition

In Minecraft Education Edition, there are 2 syntaxes for the /fill command.

To fill a region with a type of block:

/fill < from> < to> < tileName>   

To replace one type of block in a region with another type of block:

/fill < from> < to> < tileName>   replace < replaceTileName> < replaceDataValue> 

Definitions

  • from is the starting x y z coordinate for the fill region .
  • to is the ending x y z coordinate for the fill region .
  • tileName is name of the block to fill the region.
  • tileData is optional. It is the data type or variation of the block if more than one type exists for that tileName.
  • replace will replace all blocks in the fill region, including air.
  • outline is optional. It will replace blocks on the outer edge of the fill region, but does not replace the inner blocks.
  • hollow is optional. It will replace blocks on the outer edge of the fill region, and replaces inner blocks with air.
  • keep is optional. It will replace only air blocks in the fill region.
  • destroy is optional. It will replace all blocks in the fill region, including air. Replaced blocks will be dropped and can then be collected as if they were mined with a pickaxe or shovel.
  • replaceTileName is the name of the block that will be replaced.
  • replaceDataValue is the variation of the block to be replaced if more than one type exists for that replaceTileName.

TIP:

Building The Mob Spawner Tower

  • 1Create the tower. Each side of the tower should be two blocks wide and 28 blocks tall. This will create a 28-block-tall tower with a two-by-two space in its center.
  • 2Add a branch to each side of the tower. Add seven blocks to both blocks on each side of the top of the tower. This should result in four branches of eight total blocks in length pointing out from the center hole of the tower.
  • 3Create a wall around each branch. Each branch will need a two-block-tall wall around it to prevent mobs from jumping out once they fall in.
  • 4Fill in the area between the branches. To increase the surface area upon which mobs can spawn, add cobblestone between each of the branches to create a large, rectangular platform.
  • The cobblestone you use here should be placed at the height of the top of the walls that you built around the branches.
  • 5Create a wall around the whole top of the spawner. This wall should be two blocks tall to prevent mobs from exiting the mob spawner.
  • You can also use a fence for this step.
  • 6Add water to the far end of each branch. Select the bucket of water in your inventory, then select each of the two blocks at the furthest end of each branch. This will create a stream of water that runs from the end each branch toward the center of the spawner, stopping right before it reaches the center hole.
  • Eight blocks is the maximum distance that one block of water will travel over flat land before stopping.
  • Don’t Miss: How To Get Minecraft Mods On Nintendo Switch

    What Is A Purple Dye Used For

    The purple dye is one of the secondary dyes in Minecraft. You can make this dye by combining two primary dyes. There are tons of benefits that you can get from the purple dye in Minecraft.

    • Used to make purple terracotta

    The purple dye will help you to paint your terracotta purple. You will need eight terracottas and one purple dye in your Minecraft crafting grid to make purple terracotta. You can also make purple glazed terracotta as a decoration item for your Minecraft world.

    • Used to dye wool

    You can dye the wool of your sheep and wolves with this dye. It will make you able to dye the collars of tamed cats in your gameplay.

    • Used to make big firework star

    You will need purple dye to make and dye firework stars by using gunpowder. You can also create different effects for your firework with the help of purple dye.

    • Used to make magenta dye

    You can use purple dye to make or create magenta dye to color your tools and weapons in this online gaming world.

    • Used to make purple stained glass

    The purple dye will help you to dye stained glass in your gameplay. You will do so to add this unique color to the doors and windows of your Minecraft house. You can also make purple stained glass panes by using glass panes and purple dye.

    • Used to dye signboards, sheep, and leather armor

    You can easily dye different sign boards, sheep, leather armors, and many other tools with this dye. You can get three purple blocks from sheep and one purple block from wool.

  • Used to dye your beds.
  • Mine The Required Materials

    That

    First, you need to navigate in your Minecraft world to find lapis lazuli and rose red. You can also get a purple dye by having red and blue dye in your Minecrafts inventory. You can also find red tulips or rose bush for the same purpose. With lapis lazuli, you will get blue dye, and red tulips will help you get the rose-red dye.

    Read Also: How To Get Bonemeal In Minecraft

    How To Get A Big Painting In Minecraft 2021

    16x Resolution. Minecraft 1.16.5 Game Version. jacobfrance last month. 1.4k 270 1. x 1. Everywhere At The End Of Time – Stage 6 Painting Back. 16x 1.17 Snapshot Texture Pack. 14 How to craft a Flower Pot in Survival Mode. 1. Open the Crafting Menu. First, open your crafting table so that you have the 3×3 crafting grid that looks like this: 2. Add Items to make a Flower Pot. In the crafting menu, you should see a crafting area that is made up of a 3×3 crafting grid. To make a flower pot, place 3 bricks in the 3×3. I had so much fun making their Minecraft themed room. Some of my favorite pieces in there is this large statement piece with this Minecraft wall art, including a zombie, Steve and a creeper. Each face is about 21×21 inches. These were so easy to make and the best part was that they were very inexpensive

    How To Get Purple Dye In Hypixel Skyblock

    In Minecraft, Hypixel Skyblock is one of the largest and highest quality server networks. This server boasts the efficiency and overall performance of your gameplay and allows you to grow better as a player in this online gaming world. You can get purple dye in Minecraft hypixel skyblock.

    The only thing that you need to cater to is that you cant use the required items for your dye. Instead, you can use dyes to get other dyes in Minecraft hypixel skyblock. You can use the hypixel skyblock for Minecraft survival mode only. It wont work in creative mode.

    Also Check: How To Make Special Arrows In Minecraft

    Fill Command In Minecraft Xbox One Edition

    In Minecraft Xbox One Edition, there are 2 syntaxes for the /fill command.

    To fill a region with a type of block:

    /fill < from> < to> < tileName>   

    To replace one type of block in a region with another type of block:

    /fill < from> < to> < tileName>   replace < replaceTileName> < replaceDataValue> 

    Definitions

    • from is the starting x y z coordinate for the fill region .
    • to is the ending x y z coordinate for the fill region .
    • tileName is name of the block to fill the region.
    • tileData is optional. It is the data type or variation of the block if more than one type exists for that tileName.
    • replace will replace all blocks in the fill region, including air.
    • outline is optional. It will replace blocks on the outer edge of the fill region, but does not replace the inner blocks.
    • hollow is optional. It will replace blocks on the outer edge of the fill region, and replaces inner blocks with air.
    • keep is optional. It will replace only air blocks in the fill region.
    • destroy is optional. It will replace all blocks in the fill region, including air. Replaced blocks will be dropped and can then be collected as if they were mined with a pickaxe or shovel.
    • replaceTileName is the name of the block that will be replaced.
    • replaceDataValue is the variation of the block to be replaced if more than one type exists for that replaceTileName.

    Example In Education Edition

    Minecraft :How to make a big hole in just 2 minutes

    To fill a 5x1x5 area with diorite in Minecraft Education Edition:

    /fill ~-2 ~-1 ~-2 ~2 ~-1 ~2 stone 3

    To build a solid structure out of chiseled sandstone:

    /fill ~1 ~0 ~1 ~10 ~10 ~10 sandstone 1

    To build a large hollow polished andesite structure :

    /fill ~1 ~-1 ~1 ~10 ~5 ~10 stone 6 hollow

    To mine a region, by replacing all blocks in the area with dirt starting 8 blocks deep up to ground level , that is 4 blocks away from you in all horizontal directions:

    /fill ~-4 ~-8 ~-4 ~4 ~-1 ~4 dirt 0 destroy

    To replace all grass blocks with gold blocks in the fill region with a starting coordinate of ~8 ~ ~12 and an ending coordinate of ~-25 ~-1 ~-20:

    /fill ~8 ~ ~12 ~-25 ~-1 ~-20 gold_block 0 replace grass 0

    Also Check: How To Get Frost Walker Boots In Minecraft

    Example In Windows 10 Edition

    To fill a 9x1x9 area with chiseled red sandstone in Minecraft Windows 10 Edition:

    /fill ~-4 ~-1 ~-4 ~4 ~-1 ~4 red_sandstone 1

    To build a solid structure out of purpur pillars:

    /fill ~1 ~0 ~1 ~10 ~10 ~10 purpur_block 2

    To build a large hollow coal blocks structure :

    /fill ~1 ~-1 ~1 ~10 ~5 ~10 coal_block 0 hollow

    To mine a region, by replacing all blocks in the area with stone starting 8 blocks deep up to ground level , that is 3 blocks away from you in all horizontal directions:

    /fill ~-3 ~-8 ~-3 ~3 ~-1 ~3 stone 0 destroy

    To replace all grass blocks with lapis lazuli blocks in the fill region with a starting coordinate of ~5 ~ ~10 and an ending coordinate of ~-25 ~-1 ~-25:

    /fill ~5 ~ ~10 ~-25 ~-1 ~-25 lapis_block 0 replace grass 0

    How To Make A Mob Spawner In Minecraft

    This article was written by Jack Lloyd. Jack Lloyd is a Technology Writer and Editor for wikiHow. He has over two years of experience writing and editing technology-related articles. He is technology enthusiast and an English teacher. This article has been viewed 652,708 times.

    This wikiHow teaches you how to create a trap for enemy mobs in Minecraft that will allow you to collect the enemies’ dropped items after they die. If you’d rather create an apparatus that allows you to spawn mobs on command, you can use a dispenser in Creative Mode to do so.

    Recommended Reading: What’s The Best Enchantment In Minecraft

    Minecraft: How To Make A Painting

    • 79,189 games played & 477,512 total rounds played. 66,513 unique players. 357,105,272 total coins earned across all players. 2,843,586 kills of which 27,582 were grenade kills. 235,096 bombs placed & 69,708 of those bombs were defused. Combined playtime of 9 years and 10 months
    • DIY.org is a safe online learning community of kids with 1000s of courses & projects on music, painting, photography, science, cooking, art and craft, and many more. Our educational videos are paired with projects that kids can do at home and earn badges while they learn new skills. Join for Free
    • We used an online tool to convert images into ‘Minecraft’ maps. Here is the website if anyone wants to do the same thing. The colors won’t be 100% accurate, but it is much more flexible than a.
    • If you play Minecraft, the world’s favorite modular building game, you might have noticed that your home in the game is more sparsely furnished than your real-world house.To remedy this, you’ll need to learn how to build some virtual furniture using the resources available to you in the game. This article contains tutorials that will guide you through the construction of six different home.

    How To Get Large Paintings In Minecraft

    A BIG Hole!!!!! Minecraft Map
    • Make a hole in the wall for your TV. Your TV hole should be two blocks wide and one block tall. Place two pistons next to each other. Face toward where you want your TV screen, then place a piston in each of the holes for the missing blocks in your wall. Place a redstone repeater below and behind each piston
    • A big part of that Minecraft Dungeons mood is exemplified by a gameplay mechanic that comes into play during cooperative multiplayer when one player loses all their health in combat and goes down
    • Minecraft is a fun and addictive game, suitable for adults and kids. It’s my daughter’s favorite game currently. Sadly, there’s no official merchandise available right now, but Notch has consented to the making of custom Creeper T-shirts.. I couldn’t find a design-your-own site that offered the right colored shirt in kid sizes, so I decided to make my own
    • ecraft!!

    Don’t Miss: What Does Random Tick Speed Do In Minecraft

    How To Make A Painting In Minecraf

    Description. Painting frames are a way to display both vanilla paintings and paintings included with BiblioCraft . Paintings can be scaled, rotated and in some cases the aspect ratio can be adjusted as well as the texture resolution With a right-click on a block you place the painting. If you hang the painting down, you get the painting item with the size and painting selected, that you hang up. With a right click into the air, you can open a GUI, where you can select the painting size and the painting. If you tick Random Painting, a random painting with the selected. Copy the JAR file. The Jar file has an icon with a coffee cup on it. The filename is the latest Minecraft version number. Right-click the Jar file and click Copy.. If your mouse or trackpad doesn’t have right and left buttons, use two fingers to tap on the trackpad , or press the right side of the button, to simulate a right-click Nov 30, 2013 – Can you build it? :). See more ideas about minecraft pixel art, pixel art templates, pixel art

    Building The Mob Spawner Basement

  • 1Create the chute. Dig a two-by-two six-block-deep at the base of the inside of the tower. This will create a deep hole at the bottom of the tower so that, when mobs spawn at the top of the tower and fall into it, they will be funneled into this hole.
  • 2Add four hoppers to the bottom of the hole. Select the stack of hoppers in your equip bar, then select each of the four blocks at the bottom of the chute.
  • 3Remove one block from beneath each of the hoppers. This will leave the hoppers suspended in midair.
  • 4Add chests below the hoppers. Select the chests in your equip bar, then select each of the four empty blocks below the hoppers. This should create two large chests below the hoppers.
  • 5Make the basement accessible from ground level. This will vary slightly depending on your world’s topography, but in most cases you’ll need to create a staircase back to the surface since you’re using two large chests, you should repeat this step for the opposite side of the basement as well.
  • When guarding the basement, make sure that you have a sword on you. This will ensure that you can kill any mobs which survive the fall.
  • 6Wait for mobs to begin spawning. It can take up to a full day and night cycle for your mobs to begin spawning once they do, your hoppers’ chests will begin filling up with the mobs’ dropped items.Advertisement
  • Recommended Reading: How Do You Make Chiseled Stone In Minecraft

    How To Craft A Painting In Minecraft: 7 Steps With Pictures

    • There are two main designs for televisions in Minecraft. You can make a decorative TV that is really just coal blocks, black wool, or obsidian decoratively in or on the wall or floor. You could also just use a 2×1 painting starting from left to right to imitate a flat-screen TV
    • Step 9: Filling in the Diamond. Gather the turquoise duck tape, pencil, and your scissors. Cut a 10 inch long piece of duck tape, stick the end of it to the edge of the table. Make about a 1 inch cut in the center of the shorter end of the piece of duct tape you cut, then it will tear the rest of the way. Next cut two 5 inch pieces from that.
    • Steps To Make A Piston Door. This door is pretty simple, so let’s get right into building it. Place the block of your choice in a 3×2 platform. From the middle block of each side, place 2 additional blocks going outwards. On the farthest block, place another, creating a staircase effect

    Taking Water From A Lake

    How To Make A Big Hole In Minecraft

    The water you see in your lake is superficial, what this means is that, contrarily to a regular pool of water one-block-deep, springs won’t auto-regenerate. There’s a set number of springs in the top layer of the lake, and if you fill your bucket with one of those, that spring won’t be replaced naturally, you’ll need to do it yourself by referring to the “There are currents!” section above.

    If you want your lake to give you water forever, you can always fill the bottom layer with water, at this level, the water will regenerate eternally but you’ll need to dive to get a new bucket of water.

    If your lake is too deep or you don’t want to dive every time, you can either dig a one block deep line that will go around your lake or build a new pool beside your existing one for your buckets need.

    Alternatively, you can dig a 3×1 hole and fill it with water. You will be able to infinitely take water from the middle block. Also, you can make it 3×2 and take water from all blocks.

    Read Also: Minecraft Set Tick Speed

    RELATED ARTICLES

    Most Popular