How Do I Give Players Already Enchanted Tools/armour/weapons
I’m making a map where I want players to be able to choose there kits/classes. The problem I’m having with it though is giving players already enchanted Tools/Armour/Weapons.
I’m not sure if you can use the /give because you’ll have to use the whole thing and I’m not sure how to make enchanted Tools/Armour/Weapons using that.
Can anyone help?
This answer is for 1.12 or before. Refer to this answer by pppery for 1.13 and later.
You can set up some simple commands with command blocks, and let players click the button of each command block so that they receive the enchanted items.
You can use the following command to give players enchanted items
This is the general command:
You put all enchantment tags between , each with both id and lvl tags wrapped together by curly braces .
You can also add in the clear inventory command to ensure they don’t get kits twice.
Remember the highest level for the enchantment is level 32767.You can stack enchants as many times as you want such as:
After setting up the command blocks, put buttons and the players can choose by clicking them.
You can also put enchantments onto things that normally cannot be enchanted or have that specific enchantment. For example, you can do the command stated above to give you enchanted blocks. But, enchantments will NOT affect how the thing works normally. For example, enchanting Thorns on a dirt block will not hurt players when they come into contact with the enchanted block.
Add Commands To An Npc
You can add commands to an NPC that the NPC will execute after a player closes their dialog window. Unlike a Command Block, a single NPC can execute multiple commands.
To add commands to an NPC, follow these instructions:
Your NPC will execute these commands in order whenever a player interacts with them and closes their dialog box. For a list of commands that your NPCs can execute, see Commands.
Quick Guide To Spawning Items
Minecraft comes loaded with an easy to use command to give yourself or any other player items. Unfortunately, this command only works on PC and the Pocket Edition, console is not supported. All youll have to do is enter the command /give < Player> < Item> < Amount> . For a more in depth breakdown of using this command, scroll below to jump directly to a full guide.
Recommended Reading: How To Get Minecraft Mods On Nintendo Switch
Spawning Items In Minecraft
Firstly, we need to enable cheats within our game. This is done differently in singleplayer and multiplayer. In singleplayer, youll need to make sure you check the Enable Cheats option before creating your world. If playing on a multiplayer server, you will typically need to have admin privileges to use the command. For help with this, contact your game server administrator to set up admin access.
Now that you have the proper privileges, you can begin spawning items for yourself and others. Lets take a look at the command in a little more detail.
How Do I Summon A Weapon Or Tool With A Low Durability
I’m trying to make a custom npc map for myself.I need a command that will summon a weapon that has low durability so it can by dropped by the npc.
Can anyone give me an example on how to do it?
- You’ve described your problem well enough, but it often helps to also include things you’ve already tried. For instance, if you already have the NPC dropping the weapon, include how you did that. MBraedleyJan 9 ’16 at 15:23
- Hello and welcome please use the tags to define your game and platform instead of writing it in the title. VahxJan 9 ’16 at 15:24
- I’m using the custom npc mod and I need a command that spawns a weapon with half durability so I put that item in his inventory so when he dies, Out comes that tool or weapon.
Another thing that should be taken into account is that you cannot change the maximum durability of an item unless you use some sort of datapack or mod, but other than that you can change the number of uses it has left.
In 1.13 and after:
The /give command can do this.
The syntax is:
/give < player> < item>
To give tools with less durability, just increase the .
This will give a diamond sword with full durability:
This will give a diamond sword with 50 durability missing:
This will give a diamond sword with 100 durability missing:
Read Also: What Is The Random Tick Speed In Minecraft
Give Command In Minecraft Xbox One Edition
In Minecraft Xbox One Edition, the syntax to give a player an item is:
/give < player> < itemName>
Definitions
- player is the name of the player to give the item to.
- itemName is the name of the item to give .
- amount is optional. It is the amount of the item that you want to give. If you don’t specify an amount, the player will be given 1 of the item.
- data is optional. It identifies the variation of the block if more than one type exists for that Item ID . Use a value of 0 if no data value exists for the item.
- components is optional json.
Change The Gamemode Command
/gamemode < mode>
Changes the gamemode for everyone in the session. Add a players name to the end of the code to alter the mode for different players. Replace “< mode> ” with one of the following options:
- Survival
Ark cheats: Expedited evolution
/give < player> < item>
Drops an item into the players inventory. Perfect for if you want to start a run with a full set of diamond gear. Just keep in mind the amount section only works for stackable items. You cant give yourself 100 diamond swords in one go, as cool as thatd be. For a full list of item IDs, head here.
Example: /give PCGamer diamond_sword 1
Help if a command isnt working
/help
Offers additional information about any console command. If youre trying a command and it isnt working as it should, type the above command before the name of the command that isnt working and youll be treated to more details about how it works.
Example: /help kill
Also Check: How To Make A Chisel Minecraft
How To Get Items On First Spawn In Minecraft
I think the first is cooler, but either works. You can use Essentials Kit/Spawn. Just add your items into the Kit part of the config and add the kit to the Spawn part of the config. More information can be found here: http://wiki.ess3.net/wiki/Command_Reference/Kits
New players join there and old players will respawn where they left off or can go to spawn with /spawn. Just note that when only when a player first joins is when they can spawn there, after that spawn is spawn.
Minecraft Command To Get Items Back
minecraft-commandsminecraft-java-edition
I fell into the void and I lost all of my netherite. Is there any possible solution to this. I have looked up different commands to use and none of them work. A lot of them say to load your backup world but I don’t have one. What should I do?
Best Answer
Unfortunately there is no way to retrieve your inventory whole as it was. You will have to replace each item yourself.
If you are playing singleplayer with cheats, you can enter creative mode to spawn and enchant netherite equipment with no material or experience cost. The command for this is /gamemode creative
If you are playing singleplayer without cheats, a workaround to the disabling of cheats is to open the singleplayer world to LAN using “Open to LAN” from the ESC menu. This will give you the option to enable cheats for as long as the world is open to LAN. Once you are done, you can exit and rejoin the world to make it behave like a singleplayer world again.
If you are playing multiplayer and you are the owner, you can either give yourself items through the server console, or give yourself operator status and switch your gamemode to creative.
If you are playing multiplayer and you are not the owner, you will have to contact the server administrator and ask them about retrieving your items.
Related Question
You May Like: How To Make A Dragon Banner In Minecraft
Minecraft: Using Console Commands To Get Invisible Item Frames
It is important to keep in mind that this method is currently only available to Java players as of Minecraft 1.17. Since the invisible item frame is not considered an independent entity in Minecraft: Bedrock Edition, the method won’t apply the same. This may change in the future, but for now this method is restricted to Java Edition.
If players are unable to execute the chat command, it may be because they have opened a world where cheats are not permitted. In order to fix this, all Minecraft players need to do is open their world to LAN connections. Once they do so, they should be able to enable cheats via their settings and enter the needed console command without issues.
This applies differently to multiplayer servers and worlds, as commands are restricted to what certain player permissions allow. For example, server admins or devs may have the ability to use console commands, but the same may not be true of standard players. This varies depending on the multiplayer server in question.
Invisible item frames open up a ton of decorative options for Minecraft players, allowing them to combine tools and items with the direct texture of a block. Players on multiple Minecraft decoration sites have sported impressive uses for this mechanic such as creating things like smartphones or computer access panels for modern Minecraft creations by using things like banners with invisible item frames.
Enchant Command In Minecraft Nintendo Switch Edition
In Minecraft Nintendo Switch Edition, the syntax to enchant the item that a player’s holding is:
/enchant < player> < enchantmentName>
/enchant < player> < enchantmentID>
Definitions
- player is the name of the player that you wish to enchant an item for.
- enchantmentName is the name of the enchantment to add.
- enchantmentID is the ID of the enchantment to add.
- level is optional. It is the level of enchantment to apply. If you don’t specify a level, it will apply the enchantment at Level I.
Recommended Reading: Minecraft Enlarge Map
Enchant Command In Minecraft Windows 10 Edition
In Minecraft Windows 10 Edition, the syntax to enchant the item that a player’s holding is:
/enchant < player> < enchantmentName>
/enchant < player> < enchantmentID>
Definitions
- player is the name of the player that you wish to enchant an item for.
- enchantmentName is the name of the enchantment to add.
- enchantmentID is the ID of the enchantment to add.
- level is optional. It is the level of enchantment to apply. If you don’t specify a level, it will apply the enchantment at Level I.
How To Get An Invisible Item Frame In Minecraft
For dedicated Minecraft decorators, sometimes having a frame around an item placed on a surface doesn’t quite capture the look desired.
Some players have posted visuals showing their tools and items placed on surfaces without a standard frame around them. Item frames by default possess a certain appearance in vanilla Minecraft, somewhat limiting players hoping to achieve a more worn-in decorative approach.
Fortunately, there is a fix for this by using Minecraft: Java Edition’s console commands, enabling players to place item frames that essentially appear invisible to the naked eye. This presents items in a much different way, making them appear as if they are placed upon the surface itself.
Read Also: Minecraft Tipped Arrows Recipe
What Are Minecraft Commands
If youre fairly new to the concept of Minecraft commands , dont worry. Theyre not as complicated as some might think. Definitely not as intimidating as Minecraft modding, either.
In fact, wed argue that Minecraft Console Commands play a huge role in Minecraft gameplay.
Minecraft commands are words or character strings that you input to instantly modify or alter an element of the game. For instance, you can use commands to:
- Add an item to someones inventory
- Instantly enchant an item
and so on. Theres actually a lot you can do with console commands.
Enchant Command In Minecraft Xbox One Edition
In Minecraft Xbox One Edition, the syntax to enchant the item that a player’s holding is:
/enchant < player> < enchantmentName>
/enchant < player> < enchantmentID>
Definitions
- player is the name of the player that you wish to enchant an item for.
- enchantmentName is the name of the enchantment to add.
- enchantmentID is the ID of the enchantment to add.
- level is optional. It is the level of enchantment to apply. If you don’t specify a level, it will apply the enchantment at Level I.
You May Like: Minecraft Dolphin’s Grace
Enchant Command In Minecraft Ps4 Edition
In Minecraft PS4 Edition, the syntax to enchant the item that a player’s holding is:
/enchant < player> < enchantmentName>
/enchant < player> < enchantmentID>
Definitions
- player is the name of the player that you wish to enchant an item for.
- enchantmentName is the name of the enchantment to add.
- enchantmentID is the ID of the enchantment to add.
- level is optional. It is the level of enchantment to apply. If you don’t specify a level, it will apply the enchantment at Level I.
Enchant Command In Minecraft Pocket Edition
In Minecraft Pocket Edition , the syntax to enchant the item that a player’s holding is:
/enchant < player> < enchantmentName>
/enchant < player> < enchantmentID>
Definitions
- player is the name of the player that you wish to enchant an item for.
- enchantmentName is the name of the enchantment to add.
- enchantmentID is the ID of the enchantment to add.
- level is optional. It is the level of enchantment to apply. If you don’t specify a level, it will apply the enchantment at Level I.
Read Also: How To Turn Off Narrator On Minecraft Xbox One
List Of Useful Minecraft Commands
Here’s a list of common commands that can improve your Minecraft experience:
How to change the gamemode of a player in Minecraft
/gamemode < 0/1> < player> In the player spot, you will put the name of the person of whom you want to change the gamemode of, this could be yourself or another player on the server. In the next part, you will either put “0” which is Survival or “1” which is Creative. The brackets are not used. For example, a sample command would say: /gamemode 1 Carpetfizz which will change my game type to Creative mode.
How to teleport a player to another player in Minecraft
/tp < player> < target>
Give Command In Minecraft Windows 10 Edition
In Minecraft Windows 10 Edition, the syntax to give a player an item is:
/give < player> < itemName>
Definitions
- player is the name of the player to give the item to.
- itemName is the name of the item to give .
- amount is optional. It is the amount of the item that you want to give. If you don’t specify an amount, the player will be given 1 of the item.
- data is optional. It identifies the variation of the block if more than one type exists for that Item ID . Use a value of 0 if no data value exists for the item.
- components is optional json.
Read Also: How To Change Minecraft Gamertag On Nintendo Switch
How To Become The Admin Of A Minecraft Server
Assuming that you have been following all the guides leading up to this page, you should have a folder with all the server files in it. Inside the folder there will be a text document that you can open in Notepad called “ops.txt”. Enter your name as it appears on Minecraft, into that document and save it.
This will make a mod of the server first. Then, if it is not already there, create another text document called “admins.txt” and drag it into your server folder. Open it and type your Minecraft name as it appears into the file and save it. You are now the admin of the server. This will give you access to a variety of Minecraft commands, some of which I will be going over below.
World And Environment Minecraft Commands
/seedProduces a seed code so you can recreate your world later
/setworldspawn Set the world spawn location to the player’s current position, or optional specified coordinates if entered
/gamemode < type> Sets the game mode type for yourself or an optional player
/gamerule < rule> Queries the value of a game rule, or amends it if an optional value is entered. A list of rule codes is here
/difficulty < level> Sets the difficulty level
/time set < value> Sets the world game time, use 0 , 1000 , 6000 , 12000 , or 18000 as the value
/gamerule doDaylightCycle falseTurn off the day/night cycle, replace false with true to reactivate
/weather < type> Sets the weather type for an optional duration in seconds
/gamerule doWeatherCycle falseTurn off weather changes, replace false with true to reactivate
/clone < x1 y1 z1> < x2 y2 z2> < x y z> Clones the blocks in the region between coordinates < x1 y1 z1> and < x2 y2 z2> , then places them with coordinates < x y z> in the lower northwest corner
Also Check: Where To Get Cocoa Beans Hypixel Skyblock
Give Command In Minecraft Pocket Edition
In Minecraft Pocket Edition , the syntax to give a player an item is:
/give < player> < itemName>
Definitions
- player is the name of the player to give the item to.
- itemName is the name of the item to give .
- amount is optional. It is the amount of the item that you want to give. If you don’t specify an amount, the player will be given 1 of the item.
- data is optional. It identifies the variation of the block if more than one type exists for that Item ID . Use a value of 0 if no data value exists for the item.
- components is optional json.