How To Use Commands In Minecraft Ps4

How Do You Use Commands In Minecraft

To use a Minecraft command or cheat, all you need to do is hop into your Minecraft game and tap the / key to open up the console. Every command in Minecraft must start with a /, but using this shortcut will automatically add the / prefix so you can just start typing the command you want to use.

Teleport Command In Minecraft Java Edition

In Minecraft Java Edition 1.13, 1.14, 1.15, 1.16, 1.17 and 1.18, there are different syntaxes depending on who or where you are teleporting.

To teleport to a set of coordinates:

/teleport < location> 

To teleport to the location of another target:

/teleport < destination> 

To teleport a target to the location of another target:

/teleport < targets> < destination> 

To teleport a target to a set of coordinates facing the direction of another set of coordinates:

/teleport < targets> < location>  facing < facingLocation> 

To teleport a target to a set of coordinates and rotate the direction the target will be facing:

/teleport < targets> < location>  

In Minecraft Java Edition 1.10, 1.11 and 1.12, the syntax to teleport an entity to a set of coordinates is:

/teleport < entity> < x> < y> < z>  

Definitions

• location or x y z is the to teleport to.
• destination is the name of a player to teleport to.
• targets or entity is the name of a player to teleport.
• facingLocation is the that the entity will face after being teleported.
• yRot or y-rot is optional. It is the y-rotation that the entity is facing after teleportation in degrees. 0=South, 90=West, 180=North, 270=East.
• xRot and x-rot is optional. It is the x-rotation that the entity is facing after teleportation in degrees. Positive values look downward and negative values look upward. 0=facing forward, 90=facing straight down, -90=facing straight up

How To Use Console Commands

Before you can start zipping around the map and giving all your friends free diamonds, you’ll need to make sure you’re playing on a server that allows console commands. If you’re the one creating the server, you can simply enable this option during setup. If you’re playing on another server, try pulling up the command console menu this varies by platform, but can be performed on PC using the “/” key.

With the command console open, all you’ll need to do is type in your cheat code and the game will take care of the rest.

You May Like: How To Get Totem Of Undying

Fill Command In Minecraft Nintendo Switch Edition

In Minecraft Nintendo Switch Edition, there are 2 syntaxes for the /fill command.

To fill a region with a type of block:

/fill < from> < to> < tileName>   

To replace one type of block in a region with another type of block:

/fill < from> < to> < tileName>   replace < replaceTileName> < replaceDataValue> 

Definitions

• from is the starting x y z coordinate for the fill region .
• to is the ending x y z coordinate for the fill region .
• tileName is name of the block to fill the region.
• tileData is optional. It is the data type or variation of the block if more than one type exists for that tileName.
• replace will replace all blocks in the fill region, including air.
• outline is optional. It will replace blocks on the outer edge of the fill region, but does not replace the inner blocks.
• hollow is optional. It will replace blocks on the outer edge of the fill region, and replaces inner blocks with air.
• keep is optional. It will replace only air blocks in the fill region.
• destroy is optional. It will replace all blocks in the fill region, including air. Replaced blocks will be dropped and can then be collected as if they were mined with a pickaxe or shovel.
• replaceTileName is the name of the block that will be replaced.
• replaceDataValue is the variation of the block to be replaced if more than one type exists for that replaceTileName.

Effect Command In Minecraft Windows 10 Edition

In Minecraft Windows 10 Edition, there are different syntaxes depending on what you want to do.

To give a player an effect:

/effect < player> < effect>    

To remove an effect from a player:

/effect < player>  clear

Definitions

• player is the name of the player that you wish to give the effect to or remove the effects from.
• effect is the name of the potion effect to add.
• seconds is optional. It is the number of seconds that the effect should last. If you don’t specify a duration, the effect will last for 30 seconds.
• amplifier is optional. It is the number to indicate the level of the effect. If you don’t specify an amplifier, it will default to 0.
• true is optional. The effect particles are hidden.
• false is optional. The effect particles are visible.

Also Check: What Can You Do With Rabbit Hide In Minecraft

Did You Enjoy Our List Of Minecraft Console Commands

Did you manage to learn anything new from our list of the most important console commands and cheats on Minecraft? Remember to leave a comment telling us your opinion and if it worked out fine for you. If you have another suggestion or tip you want to share, just write it out down below!

Dont forget to all find out which ones are the best Android games, the best mobile multiplayer games, the best iPhone games and all our The Sims 4 tips and tricks!

Teleport Command In Minecraft Ps4 Edition

In Minecraft PS4 Edition, there are different syntaxes depending on who or where you are teleporting.

To teleport to a set of coordinates:

/teleport < x> < y> < z>   

To teleport to a set of coordinates facing the direction of another set of coordinates:

/teleport < x> < y> < z>  facing < lookAtPosition> 

To teleport to a set of coordinates facing the direction of a target entity:

/teleport < x> < y> < z>  facing < lookAtEntity> 

To teleport a target to a set of coordinates:

/teleport < victim> < x> < y> < z>   

To teleport a target to a set of coordinates facing the direction of another set of coordinates:

/teleport < victim> < x> < y> < z>  facing < lookAtPosition> 

To teleport a target to a set of coordinates facing the direction of a target entity:

/teleport < victim> < x> < y> < z>  facing < lookAtEntity> 

To teleport to the location of another target:

/teleport < destination> 

To teleport a target to the location of another target:

/teleport < victim> < destination> 

• x y z is the coordinate to teleport to.
• yRot is optional. It is the y-rotation of the entity after teleportation.
• xRot is optional. It is the x-rotation of the entity after teleportation.
• lookAtPositon is a set of x y z coordinates that the entity will face after being teleported.
• lookAtEntity is the name of a player that the entity will face after being teleported.
• victim is the name of a player to teleport.
• destination is the name of a player to teleport to.

Don’t Miss: Minecraft Banners Guide

Fill Command In Minecraft Education Edition

In Minecraft Education Edition, there are 2 syntaxes for the /fill command.

To fill a region with a type of block:

/fill < from> < to> < tileName>   

To replace one type of block in a region with another type of block:

/fill < from> < to> < tileName>   replace < replaceTileName> < replaceDataValue> 

Definitions

• from is the starting x y z coordinate for the fill region .
• to is the ending x y z coordinate for the fill region .
• tileName is name of the block to fill the region.
• tileData is optional. It is the data type or variation of the block if more than one type exists for that tileName.
• replace will replace all blocks in the fill region, including air.
• outline is optional. It will replace blocks on the outer edge of the fill region, but does not replace the inner blocks.
• hollow is optional. It will replace blocks on the outer edge of the fill region, and replaces inner blocks with air.
• keep is optional. It will replace only air blocks in the fill region.
• destroy is optional. It will replace all blocks in the fill region, including air. Replaced blocks will be dropped and can then be collected as if they were mined with a pickaxe or shovel.
• replaceTileName is the name of the block that will be replaced.
• replaceDataValue is the variation of the block to be replaced if more than one type exists for that replaceTileName.

TIP:

How To Give Items To Another Player Or Yourself In Minecraft

In the player spot you will add the username of the player you want to give items to. This can either be yourself or other players. When using this command you cannot use the name of block, you must the ID of the block.

In the last part of this command you must enter the ammount of the item you want to give, bear in mind the maximum number of items in one ‘stack’ is 64 so your items may appear in more than one stack. When using this command the items will not be delivered into your inventory but will instead be dropped at your feet, as if you had dropped them. Because of this, be careful to stand on an edge or by Lava as your items may be lost.

An example of this command would be: /give Carpetfizz 1 64 This would give me one stack of 64 Stone which would appear on the ground infront of my character.

Don’t Miss: What Can You Do With Rotten Flesh

Are Minecraft Console Commands Cheats

When describing what Minecraft commands can do, its not hard to see why people would think of them as cheats especially since they can help you circumvent a lot of obstacles and potential pitfalls. In fact, Minecraft players will often refer to console commands as cheats from time to time.

However, some of them are genuine features that players can use to make the game more enjoyable without giving themselves an unfair advantage. So if thats the general definition of a cheat, then it wouldnt be fair to say that all Minecraft console commands are cheats.

It will ultimately depend on the players choice and style of play.

Flying Command In Minecraft

There is no direct command in Minecraft that will make you fly. You can change the mode of the game using the “/gamemode creative” command, and this will allow you to press jump twice and will get you up in the air! If you want to fly even faster , you can go into Spectator mode. This requires you to press “F3 + N” at once, and gives you the ability to fly around freely and go through walls. You can scroll your mouse-wheel up or down to increase or decrease the speed. This is the fastest way to get around other than using the teleport command!

Also Check: How To Fix A Crossbow In Minecraft

How To Use The List Command In Minecraft

This Minecraft tutorial explains how to use the /list command with screenshots and step-by-step instructions.

The /list command is a server command that is only used if you are running a Minecraft server. This command will list all of the players that are currently connected to the server and the maximum number of players allowed on the server at a time.

Let’s explore how to use this game command.

Best Console Commands In Minecraft

Of course, pulling up the command console will only get you so far you’ll also need to know a few codes to enter in the dialogue box. Thankfully, some versions of Minecraft will give you a few suggestions as you begin typing in the command console, but we’ve pulled together some of the best cheat codes for your perusing:

• Give a player free items
• /give < player> < item> < /item> < /player>

• Create a mob at the select location
• /summon < entity> < /entity>

There are dozens of other cheat codes to discover in Minecraft, but these six should give you a fun way to start experimenting with the console command system. Remember codes may vary slightly by platform, and you can only use these on servers that have enabled cheats.

Don’t Miss: Cute Banner Designs Minecraft

Fill Command In Minecraft Xbox One Edition

In Minecraft Xbox One Edition, there are 2 syntaxes for the /fill command.

To fill a region with a type of block:

/fill < from> < to> < tileName>   

To replace one type of block in a region with another type of block:

/fill < from> < to> < tileName>   replace < replaceTileName> < replaceDataValue> 

Definitions

• from is the starting x y z coordinate for the fill region .
• to is the ending x y z coordinate for the fill region .
• tileName is name of the block to fill the region.
• tileData is optional. It is the data type or variation of the block if more than one type exists for that tileName.
• replace will replace all blocks in the fill region, including air.
• outline is optional. It will replace blocks on the outer edge of the fill region, but does not replace the inner blocks.
• hollow is optional. It will replace blocks on the outer edge of the fill region, and replaces inner blocks with air.
• keep is optional. It will replace only air blocks in the fill region.
• destroy is optional. It will replace all blocks in the fill region, including air. Replaced blocks will be dropped and can then be collected as if they were mined with a pickaxe or shovel.
• replaceTileName is the name of the block that will be replaced.
• replaceDataValue is the variation of the block to be replaced if more than one type exists for that replaceTileName.

Setblock Command In Minecraft Xbox One Edition

In Minecraft Xbox One Edition, the syntax to replace a block with another block is:

/setblock < position> < tileName>   

Definitions

• position is the x y z coordinate for the block to replace.
• tileName is name of the replacement block.
• tileData is optional. It is the data value for the replacement block. It identifies the variation of the block if more than one type exists for that tileName.
• replace is optional. It tells the command to replace the block, including air. This is the default behavior.
• keep is optional. It tells the command to replace the block if the block was air.
• destroy is optional. It tells the command to replace the block, including air. The old block will be dropped and can then be collected as if it was mined with a pickaxe or shovel.

Recommended Reading: How Do You Craft Stairs In Minecraft

The Ultimate Guide To Minecraft Commands And Cheats

Minecraft is already a fairly customizable game. Players can wander around in an open world, build whatever they want, and play however they want. They can even make major changes to the game itself by installing Minecraft mods . However, Minecraft commands or console commands add an extra element of customization that can drastically improve gameplay.

• Are Minecraft Console Commands Cheats?
• How to Use Minecraft Commands
• Player-Targeted Minecraft Commands
• Item/Entity Commands

As a Minecraft player, if you havent touched Minecraft commands yet, its fair to say that youre kind of missing out on a lot.

Be sure to check out our other useful Minecraft Articles:

How To Set Up A Command Block

Once your Command Block is placed, theres a couple settings youll see when you interact with it.

Choosing between Impulse, Current or Repeat, and Chain will decide when your Command Block activates.

Impulse will make the command run once and stop.

Current or Repeat will make the command repeat consistently while powered.

Chain will make it so the block will only run after the connecting Command Block runs, allowing players to set up more complex systems.

A Command Block set at Unconditional will run no matter if the previous Command Block ran successfully. Conditional makes it so itll only run if the previous Command Block ran.

You can also set your Command Block up to be powered by Redstone. Selecting Needs Redstone will make it only activate if the block has Redstone. Selecting Always Active makes the command run regardless.

Whatever command you want set up goes into the Command Input section. You can use it to kill enemies if you dont like a particular one or other things. Minecraft commands can be a little complicated at times, especially when using it in Command Blocks, but you can check out a list of commonly used commands here so you dont have to do the heavy lifting yourself.

Don’t Miss: Spectral Arrow Recipe

How To Use Minecraft Console Commands And Cheats

Once you are in the world, you need to press the C key in order to bring up a command bar in which you need to enter all your Minecraft Cheat Codes. One important thing that you need to know is to ensure that your desired console command is prefixed by a forward slash or /. Once you have entered a correct command prefixed by /, simply hit the Enter key to see the effect.

In this Minecraft Console Commands and Cheats Guide, we have listed all available console commands and cheats that you can use in Minecraft. If there are any more that you think we missed, do let us know in the comments section below!

HelpDetails a particular command and its effect.

GiveThis allows you to give another player an items or items from your inventory.

TeleportThis command should allow you to teleport you or another player to your desired location.

Kill/killAllows you to kill your character or another player by adding his/her name to the command.

WeatherAllows you to change the weather or world.

Creative ModeIt enables flight, unlimited resources, and prevents mobs from attacking you.

Survival ModeIt allows mobs to attack you and you must collect resources and everything.

Set Time/time set 0It allows you to change the time of the day, 0 for dawn, 6000 for midday, 12000 for dusk, and 18000 for night.

DifficultyIt changes the difficulty. You can replace Peaceful with Easy, Normal, or Hard.

Keep Inventory Upon DeathThis essentially allows you to keep your inventory upon dying.