How Do You Blow Up Tnt In Minecraft

How Much Damage Does Tnt Do

TNT is a very interesting block in Minecraft. For those who haven’t used TNT in Minecraft, it is Minecraft’s only explosive block. This block is very dangerous as players can use fire and Redstone to cause explosions.

TNT blocks act as regular blocks a majority of the time. These blocks can be placed in mid-air without dropping until they are primed to explode. When TNT blocks are primed to explode they take on a flashing white appearance. They also move slightly horizontally and vertically and become subject to gravity.

TNT blocks do different amounts of damage depending on how close the player or entity is to the explosion. According to the Minecraft wiki, standing directly next to TNT harms the player by 65 damage points or 32.5 hearts.

Does Tnt Destroy Diamonds

TNT will destroy diamonds and diamond blocks. When the diamond ore is destroyed it will drop XP like normal, but the amount of diamonds you can retrieve seems to be much lower than the number of diamonds there were. In my tests, I blew up nine diamond ores and was able to pick up anywhere from 0-4 diamonds.

How Do You Blow Up Tnt On Minecraft

TNT can be activated by any of the following methods:

Recommended Reading: How To Make A Working Shower In Minecraft

Can I Mine Diamonds With Tnt

I have been playing mcpe on the raygun seed. I marked my spawn and I have a truck load of TNT and one flint and steel. While I was mining after a really long time I noticed I had no pick! I was already next to the diamonds and no I am wondering. Can I get diamonds usingTNT?

• 2If you do decide to try this, use only one TNT block, or else the additional blocks will destroy any dropped diamonds.

Assuming the same laws of TNT in the PC/Mac game apply to the Pocket edition, then yes, you can!

However, there are two things to keep in mind:

Using those numbers, while using a Fortune III pickaxe to mine diamonds will net you an average of 2.5 diamonds per ore block, using TNT to mine will net you 0.25 diamonds per ore block.

So, although you can mine any ore with TNT, it’s definitely not efficient .

What Caused My Tnt Minecarts To Explode

So I’m planning a violent execution:

I’m planning to set up a load of TNT carts around the convicted, and ignite them all at once by activating the rails.

So far so good…

The carts have started jostling, but no problem, I can fit more on.

Wat? I was just blasted a few chunks away as all the carts exploded at once. The rails weren’t powered.

The wiki only has the following to say:

When given a redstone signal, they turn on and will activate any cart that goes over them. When off, they act as normal rails.

and on the carts themselves:

It will detonate on these conditions:

• It moves over a powered Activator Rail .
• It derails and falls more than three blocks.
• It’s destroyed while in motion.
• It’s destroyed by fire, lava or an explosion.
• It turns on a curved track with a solid block or entity located beside the track .

What then caused my carts to explode?

Also Check: Totem Of Undying How To Use

Can A Tnt Block Explode In The Air

Behavior Once activated, it explodes like a normal TNT block. However, unlike the traditional TNT block, it can damage blocks underwater. It can still explode in the air, although it does not work in lava.

The TNT block will begin flashing when lit. Make sure to back up to a safe distance before it explodes . TNT has an explosive radius of about 7 blocks. 2

How Can I Stop Tnt From Blowing Up

I have a Minecraft server, and I want to know how to the ban TNT so it doesn’t do exploding damage. I have tried Essentials Protect and BanITEM, and did all the config correct multiple times. I tried all the banning items, but when you place TNT it blows up right when you place it.

To disable mob griefing type this command in chat:

/gamerule mobGriefing false

For stopping TNT from exploding, it’s a little more involved. Basically, you create a hopper loop clock, place any item in one of the hoppers and it should automatically start. Make sure you put a command block on the output

And the last step is to input this command into the command block:

And Voila! No more TNT explosions! This command will delete the TNT the second it gets lit, removing it from the game before it gets the chance to explode!

You May Like: How To Make An Ender Dragon Banner In Minecraft

What Is The Most Efficient Way To Use Tnt

After months of curiosity I have finally caved to trying out minecraft. I am currently trying to clear out a very large 25×25 area. I have built my first block of TNT and I’m ready to get down to buisness. I have read that enclosed in stone the explosion will create a 3x3x3 hole. However, what about not enclosed in stone? What is the proper hole size deep, and wide in order to maximize the blocks destroyed in a TNT blast? Assuming that all the sourrounding material is all basic stone.

Also possibly important to note: I don’t care about any ore’s destroyed in the process. I just want to make a very large dent in my project by blowing things up. Plus TNT is the manlier way to do it.

• 9Apr 17 ’12 at 14:32

I’m going to assume we’re interested in making square holes, for several reasons:

• It’s easier to measure and compare that way.
• You probably want flat walls.
• If you find a good blast pattern, you can do the same thing side-by-side to clear a larger area in multiples of the pattern without wasting any blast power.

I am also going to ignore the possibility of encountering a vein of dirt or gravel, which is much easier to blast and results in much less predictability of the results due to irregular obscured shape.

In this case, each TNT will blow up 3×3×4 – 3 – 1 = 32 blocks, and 4 were removed by hand.

Suppose we place a single TNT on a flat stone surface and ignite it. I did this and got a 7×1×7 hole where the outside was only partly exploded, leaving 12-15 blocks .

Control Explosions Using Plugin

If you are running a server type that allows plugins like Spigot, and would like to have more control on the specific explosions you would like to control, you can use the plugin called WorldGuard to do this.

You need to have WorldGuard and WorldEdit plugins installed on your server to use this option.

• WorldGuard plugin page:
• WorldEdit plugin page:

You may refer to our knowledgebase tutorial on installing plugins to your server: How to Install Plugins on Your Minecraft Server

If you already have these plugins installed, you may refer to the commands below to control explosions on your server:

Note:

Recommended Reading: How To Make Custom Pictures In Minecraft

What Happens If You Put Tnt In Water In Minecraft

If TNT is detonated in water, this will stop it from destroying any built or structural blocks. However, if a player or other entity is in the radius of the blast, damage can easily occur to living beings. If you are on an old version of Minecraft and you place TNT in your home, put water on it to make no explosion.

How To Make Tnt Blow Up Automatically When Placed

/scoreboard objectives add TNTPlaced stat.useItem.46

Hey, the only solution that I can find for 1.8.9 is to detect all blocks around players and if yes destroy the TNT and summon a primed one.So you have to run these commands in a clock :Code: And this command where you have to change the ~ ~-1 ~ by all possible coordinates around players.Code: To reduce lags you can still start the clock only when you detect that a player place a TNT with this command to add the score and then detect when the score for someone is equal to 1.

Hey, the only solution that I can find for 1.8.9 is to detect all blocks around players and if yes destroy the TNT and summon a primed one.So you have to run these commands in a clock :Code: And this command where you have to change the ~ ~-1 ~ by all possible coordinates around players.Code: To reduce lags you can still start the clock only when you detect that a player place a TNT with this command to add the score and then detect when the score for someone is equal to 1.

Ray CastingNOPEname

You May Like: How To Make A Grass Path In Minecraft

Detonating Using A Redstone Circuit

How To Get Tnt In Minecraft

The most common way to get TNT in Minecraft is to craft it yourself. TNT is made with gunpowder and sand. The easiest way to get gunpowder is to hunt down some creepers.

Creepers will drop 0-2 gunpowder when killed. When you have collected enough gunpowder, go to a crafting table and make an X of gunpowder, and fill in the spaces with sand.

This is the recipe for TNT and it will stack up to sixty-four.

TNT can be naturally generated in shipwreck chests. These generated structures at the bottom of oceans or ocean beaches can contain treasure chests. TNT is among the items you can potentially find in a shipwreck.

Different kinds of loot chests can spawn with different categories of items. If the shipwreck contained a chest full of potatoes, coal, and various enchanted leather armor, these are the chests that can spawn with TNT.

You can also find traps throughout your Minecraft world from world generation. The most common trap to run into would be the desert temple landmines. At the base of a desert temple, there are some colored terracotta blocks on the floor. Break the center-most colored terracotta to peer into the buried treasure room.

In every desert temple, there is a buried treasure room with a pressure plate in the middle. Go down carefully and disarm the TNT by breaking the pressure plate.

You can take this TNT for yourself by breaking it with anything.

You May Like: Minecraft Plant Mushroom

How Do You Activate Tnt On Minecraft

TNT can be activated with Redstone. It will activate when it receives power from a lever, Redstone torch, button, pressure plate, or any other activator.

After you activate the TNT you will see it pop up slightly and begin to flash. After about a three-second countdown the TNT will explode.

You can also light TNT with flint and steel. Simply place the TNT and right-click on it with the flint and steel to light it.

TNT will also light if there is fire of any kind nearby. Be careful placing it near lava and do not place TNT anywhere with fire unless you are trying to light it.

The explosion of TNT can also light nearby TNT.

If any other TNT blocks are in the radius of one that explodes, the rest will light and subsequently explode.

How To Blow Up Tnt In Minecraft

This article was co-authored by our trained team of editors and researchers who validated it for accuracy and comprehensiveness. wikiHow’s Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 699,762 times.Learn more…

Cacti and lava are fun ways to kill, but if you want something more exciting and explosive, you’re going to want to try out TNT. TNT is infamous for its use in traps and griefing. It can also be used to assist you while mining, though it might not be very effective. TNT is commonly used for traps and cannons only. Before creating complicated traps, it’s best to learn how to blow up TNT in the first place.

You May Like: What Do Mules Eat In Minecraft

Where To Find Tnt In Creative Mode

• Java

Here is where you can find TNT in the Creative Inventory menu:

Here is where you can find TNT in the Creative Inventory menu:

Here is where you can find TNT in the Creative Inventory menu:

Here is where you can find TNT in the Creative Inventory menu:

Here is where you can find TNT in the Creative Inventory menu:

Here is where you can find TNT in the Creative Inventory menu:

Here is where you can find TNT in the Creative Inventory menu:

Definitions

• Platform is the platform that applies.
• Version is the Minecraft version numbers where the item can be found in the menu location listed .
• Creative Menu Location is the location of the item in the Creative menu.

Through What Ways Can Tnt Be Ignited

After the 1.7 update where you cannot ignite TNT with your bare hands anymore, what are the other methods of igniting it? and also important can Creepers ignite TNT?

TNT can be lit by fire.

TNT ignited by fire

Lightning striking on the ground at Medium difficulties and up causes short-lived fires which may be able to trigger an explosions. I haven’t been able to test whether lightning directly striking a TNT on Easy or Peaceful will still trigger the explosion.

Lava also causes TNT to ignite as the TNT catches fire because of the Lava. So does lightning if it strikes your TNT, it also causes the TNT to catch fire and it will eventually ignite.

TNT can also be ignited by a Redstone Pulse send out by a Redstone Torch, Button, Lever, Pressure Plate or Detector Rail. This is also the most common and safest method as it doesn’t accidentally burn any flammable materials near you.

TNT can also be lit by left clicking it while holding flint-and-steel. In creative mode you must use right-click, otherwise the block is destroyed.

Another source of TNT triggering is explosions. TNT can trigger more TNT, as well as creepers, ghasts or exploding beds in the nether.

TNT or creeper explosions will trigger TNT. I’ll bet every nickel I have that Bed, Ghast, and Blaze explosions do it also, but can’t test that easily right now.

Redstone current will trigger TNT. The easiest way to use this is to make a lever and set it off using that.

Recommended Reading: Rooted Dirt Minecraft

How To Use Tnt In Minecraft

• Now that you have made TNT, lets see how you can use them.
• To activate the TNT, you will need a live Redstone signal.
• Alternatively, you can also light it with flint and steel.

This brings us to the end of this article on how to make and use TNT in Minecraft. As you can see, this is a pretty simple process that you can complete really quickly.

How Do You Detonate A Tnt In Survival

In the meantime, detonate a TNT in survival. Make TNT with 5 gunpowder and 4 sand blocks. Also, get flint and steel with flint and iron ingot. They are both t the Crafting table so dont worry. When I killed the creeper nothing happened.? You cant in creative mode because there is no flint and steel.

Recommended Reading: What Is The Random Tick Speed In Minecraft

Control Explosions Using Game Rules

Game rule is a feature available to Minecraft by default which allows you to modify gameplay without the use of mods or plugins. Below are the game rule commands to enable and disable different kinds of explosions:

You can find more information on Game Rules in this article: How to Use Game Rules in Minecraft