Wednesday, May 22, 2024
HomeExclusiveHow To Build A Door In Minecraft

How To Build A Door In Minecraft

Part 2 Of 3: Laying The Wiring

How to Build a WORKING ELECTRIC DOOR in Minecraft! (NO MODS!)
  • 1Dig a two-by-two-by-three hole. This means that the hole should be two blocks deep, two blocks long, and three blocks wide.
  • 2Dig two wire channels. When facing a three-block-wide side, dig a two-block-tall, two-block long corridor from the middle block, then remove the top block in front of you. Repeat this on the other wide side of the hole.
  • 3Place redstone on the bottom of the hole. This will create a two-by-three grid of redstone.
  • 4Place a redstone torch at the end of each channel. This torch will go on the raised block at the end of each corridor.
  • 5Line the corridors with redstone. You’ll place two redstone on the floor of each corridor to connect the redstone torches to the redstone on the floor of the hole.
  • 6Place a cobblestone block over both redstone torches. You may first have to place a block to the side of the torch and then attach a second block to that block for this to work.
  • You can also use wood or another solid block.
  • 7Cover up the hole and channels. You should be able to place blocks at ground level to cover the hole. Once you’ve covered up the hole and everything is even , you can proceed to creating the door.Advertisement
  • How To Build A Portcullis Door In Minecraft

    For those playing Minecraft Bedrock Edition, don’t worry; this design;will;work for you. Redstone is notoriously buggy in Bedrock Edition, but this design opens slowly enough for it not to be an issue. Those playing on Java may be able to safely speed up the design by reducing the tick counts on the repeaters, but Bedrock users should avoid doing this.

    This design is for a three-block-tall portcullis and can be up to 13 blocks wide. The guide will use a three-block-wide design for simplicity, but it can be easily expanded to fit your door size. For this three-wide contraption, you will need the following:

    • Six sticky pistons
    • Nine fence posts
    • Some building blocks and redstone dust

    How much redstone dust you need is dependent on how far away your opening/closing buttons are. It is unlikely that you will need much more than a single stack unless your door is very wide. For every additional block wide your door is, you will need three extra fences, four extra gravel blocks, four extra regular pistons, and two extra sticky pistons.

    This is how your door should be set up. The top piece of gravel in the picture below is ground-level. The fences above it are what will be pushed up to open the door. The pistons up top will need to be hidden within the upper wall of your castle if you want to hide the redstone. The bottom two rows of pistons;beneath;the gravel are sticky pistons, while the rest of the pistons in the design are not.

    Creating Hidden Piston Doors In Minecraft

    To build hidden piston doors in Minecraft, players need to have ten piston blocks laid out precisely as the image above shows, with two 2×2 stacks facing each other, then one 1×2 stack to form an “L” shape on each.

    They must ensure the green sides face each other, else the doors will not work. There also needs to be two blocks of space between the stacks, which will act as the door.

    Next, users can fill in the empty space with blocks that match the piston doors, such as cobblestone, and blend it with the piston blocks. This will make the stack “complete” and should hide the green sides completely.

    It will look as if players have two stacks of blocks rather than the “L” shape now.

    Just posted a new video about making Piston Doors in Minecraft!! Go check it out!!

    The Day Dreamer

    After that, gamers need to build a somewhat arch over the two stacks, complete with a ceiling. They must be sure to leave a space of two blocks high between the stacks, which will be the door.

    Other than the two-block high space, the walls and ceiling should cover completely. Minecraft characters are roughly two blocks high, so making sure the space of the door is two blocks high is essential.

    To finish, they may place four Redstone repeaters on the top of the building with Redstone powder connecting all of them, much like in the image below. If they are not set up correctly, they will not work or connect to each other, causing the next step not to work.

    Like and follow for more news and info!

    Don’t Miss: How To Make Hardened Clay In Minecraft

    Add The Wood Planks Or Iron Ingots To The Menu

    In the crafting table, add the items to the grid.

    You must add the items to the grid exactly as shown in the image below. In this example, we will make a spruce door. Place down 2 spruce wood blocks in the 1st row leaving the 1st box empty, 2 spruce wood blocks in the 2nd row leaving the 1st box empty, and 2 spruce wood blocks in the 3rd row leaving the 1st box empty. This is the Minecraft door recipe.

    After you’ve added the items to the crafting grid as described above, you’ll notice 3 doors in the box on the right.

    Can Pillagers Open Iron Doors In Minecraft

    Minecraft Tutorial: How To Make A Door

    Pillagers can destroy wooden doors. They wont actively seek to do it unless when trying to reach targeted players during raids.

    However, they cant activate iron doors that work on Redstone power mechanisms such as buttons and circuits.

    If the iron door has a pressure plate out front, then pillagers can trigger the door by stepping on the plate. Another way for pillagers to activate an iron door is by triggering a tripwire.

    Also Check: How To Kick People In Minecraft

    Breaking Down Iron Doors

    While wooden doors do not require tools to break down, a pick is required to break down an iron door. If you have the materials, an iron door is more than worth the six iron ingots to build it.

    Buttons only require one wooden plank block to make, or one stone block!

    Jessica Marello, Fair Use; Minecraft

    Where To Find An Oak Door In Creative Mode

    • Java

    Here is where you can find an oak door in the Creative Inventory menu:


    Here is where you can find an oak door in the Creative Inventory menu:


    Here is where you can find an oak door in the Creative Inventory menu:


    Here is where you can find an oak door in the Creative Inventory menu:


    Here is where you can find an oak door in the Creative Inventory menu:


    Here is where you can find an oak door in the Creative Inventory menu:


    Here is where you can find an oak door in the Creative Inventory menu:



    • Platform is the platform that applies.
    • Version is the Minecraft version numbers where the item can be found in the menu location listed .
    • Creative Menu Location is the location of the item in the Creative menu.

    Read Also: How To Make A Dragon Banner In Minecraft

    Q What Button Do You Press To Open A Door In Minecraft

    In Minecraft, there are three switching mechanisms that influence the doors’ operation: buttons, levers, and pressure plates. Using these mechanisms makes it more easy and comfortable to use doors. Buttons are easy to build and much simpler to use. In order for it to work, the button must be adjacent to the door or connected via Redstone. A button only stays pressed for a moment, so the door will not remain open for more than a second or two.

    How Do You Make A Door Only You Can Open In Minecraft

    How to Make a Garage Door in Minecraft (Works on EVERY Platform)

    You can use a Redstone circuit to design your own password lock. In doing so, you can create a unique lever combination that opens your door. If youre the only one who knows the right order of levers, only you can open your door.

    On public servers, other players can still grief you and destroy your mechanism or your door. By now you know how to create a simple circuit that allows you to step on a pressure plate and open two iron doors.

    Now lets look at an example of a password lock.

    Build a 12-block wide and two block high wall next to the desired building.

    Place 12 levers on the bottom block row.

    Number your levers accordingly, so you can remember the combination easier.

    Behind the wall, start placing one row of Redstone repeaters next to each block with a lever.

    Create your password.

    Behind each of the selected levers, place two normal blocks extending outward of the row of repeaters.

    In the open spaces between those normal blocks, put two blocks of repeaters at ground level.

    Place a torch on each of the first normal blocks behind your selected levers.

    Draw a Redstone circuit connecting the last row of repeaters and normal blocks.

    Connect the torches with the ground-level Redstone circuit.

    Connect the Redstone circuit to your door.

    Pull down the levers in the order you selected them and the door will open.

    Don’t Miss: How To Collect Everything In A Chest In Minecraft

    Where To Build Your House

    You should build a simple house at your initial spawn location, especially if you plan on playing with friends. This will give them a safe spot to hang out if they spawn in during nighttime and will also serve as a marker so you know where spawn is.

    Once you get a bit deeper into the game, you can make a more elaborate house in your favorite biome.

    How To Open Iron Door In Minecraft

    After you install an iron door in Minecraft you have several ways to activate it. Players can use buttons, levers, pressure plates, tripwires, and a wide range of complex Redstone mechanisms for automation.

    The following paragraphs will detail your options when dealing with single and double iron doors.

    Read Also: How To Join My Friends Minecraft World

    How To Make A Door That Locks In Minecraft

    wikiHow is a wiki, similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 10 people, some anonymous, worked to edit and improve it over time. This article has been viewed 68,670 times.Learn more…

    Monsters in Minecraft have a small chance to open doors. A few zombies waltz in, and suddenly your cozy home becomes a death trap. Protect yourself with an iron door instead, and a mechanism that monsters cannot use. Redstone allows you to make actual locks, including the simple version described here.

    How To Open An Iron Door Using A Lever

    How to make an Oak Door in Minecraft

    Using a lever is a cool way to open a door in Minecraft. It looks somewhat realistic and has the added benefit of leaving the door open for you to quickly get out or out.

  • Create a lever.
  • Place the lever on the wall on a block next to your iron door.
  • Right-click the button if playing on a PC or Mac.
  • Press the LT button when playing on Xbox.
  • Press the L2 button on a PlayStation controller.
  • Use the ZL button for both Nintendo Switch and Wii U
  • Tap the lever on mobile.
  • If you want to close the door automatically, youll have to use a button or pressure plate to trigger the door. When using a lever you can only close the door once you push the lever up back up.

    Placing a lever inside wont trigger the exterior lever and will close the door for you.

    You May Like: How Do Mushrooms Grow In Minecraft

    How To Open An Iron Door Using A Pressure Plate

    Using a pressure plate is a care-free way of triggering a door. Its also perhaps the first mechanism used by most players when low on resources early in the game.

  • Create any pressure plate you want.
  • Place the pressure plate on the block in front of the iron door.
  • Step on the pressure plate.
  • The door stays open while you are on the pressure plate and for a short time after you step off.
  • As is the case with the button mechanism, the iron door will close if using a pressure plate. Add another plate inside to get back out.

    Can Monsters Open Iron Doors In Minecraft

    In theory, any monster can trigger an iron door and open it if it has a pressure plate. Items such as stone pressure plates interact with all mobs and player characters.

    Interestingly, weighted or wooden pressure plates interact with more game mechanics. Even items, orbs, or arrows can trigger wooden and pressure plates. This can create instances when pillagers or archers shoot a pressure plate and can open a door from far away.

    Aside from stepping on a pressure plate, monsters in Minecraft cant open iron doors, and they cant use Redstone powder locking mechanisms.

    Also Check: What Do Beacons Do In Minecraft

    How To Make A Secret Door In Minecraft

    There may come a time where you will need to prioritize your privacy above all else in Minecraft. The last thing you want or need are griefers who can and will take advantage of your abode and make life more difficult for where you may store your items or base. This is where a secret door can come in handy so that locating such an important location isnt easy. In this article, we shall go over how exactly you can build your own secret door from the ground up, and what you will need to make it in the first place.

    How To Build Levers

    5 Redstone Doors You Should Know How To Build In Minecraft!

    Levers are literally switches that can be placed on walls, floor and ceilings and are often used to operate redstone devices. Levers provide a stable charge; unlike buttons, flipping a lever into the on position will keep a door open until the lever is flicked again. While levers are more popular for redstone projects where a stable charge is required, levers can easily operate iron doors if desired.

    Don’t Miss: How To Use A Resource Pack In Minecraft

    How To Open Iron Door With Redstone In Minecraft

    A Redstone circuit is a great way to trigger multiple actions in Minecraft while pressing a single button, pulling a single lever, and so on.

    If you want to know how to open iron doors at the same time in Minecraft, you have to learn to create Redstone circuits.

    For side-by-side iron doors or double doors, standard game mechanics connect a button to the door on its side. Therefore, you cant, for instance, press the left wall button to open the door on the right.

    If you have a double door system in place, you want to be able to open them at the same time for the sake of convenience. Redstone circuits allow you to do this.

    For the simplest design you will require the following materials:

    • 10 pieces of Redstone dust
    • Two iron doors
    • Four pressure plates

    Heres the circuit design:

  • Dig a hole four blocks wide and five blocks long, using the blocks underneath the doors as the center point.
  • Place a normal block on the side of each door, making sure its one block underneath.
  • On the inside of those blocks place a Redstone torch.
  • Place Redstone dust in a U-shape on both sides of the underground blocks.
  • Make sure that you have pressure plates installed on blocks in front of the doors and on top of the Redstone circuit underneath.
  • Step onto the pressure plates and you will now open both doors simultaneously.
  • How To Build Hidden Doors In Minecraft

    There may be moments in which you want to make a quick escape from enemy mobs or players, but besides escaping the scene, you also want to make sure your opponent cannot come after you. This can be achieved very easily, though some methods are easier to build, while others are less effective when your opponent is quite skilled.

    All the methods below should be quite easy to copy, though some of them require at least basic knowledge of redstone circuitry. However, even if you know nothing about redstone circuits, the images should be clear enough to show you where to place everything, if theyre not, feel free to tell me to improve them.

    Recommended Reading: How To Get Cocoa Beans In Minecraft

    How To Build In Minecraft

    This article was written by Jack Lloyd. Jack Lloyd is a Technology Writer and Editor for wikiHow. He has over two years of experience writing and editing technology-related articles. He is technology enthusiast and an English teacher. This article has been viewed 16,182 times.

    This wikiHow teaches you how to master the basics of building structures in Minecraft. While building a structure in any version of Minecraft is essentially the same process consisting of creating four walls and a roof, finding and collecting the correct resources can be a challenge if you don’t know where to start.

    How To Build An Iron Door

    Minecraft Trap Door New 1.6 Feature. How to make a wooden ...

    Iron doors operate similarly to wooden doors, except that they require a switching mechanism to open; right clicking on an iron door will have no effect. Because of this, villagers cannot open iron doors and zombies are unable to break down iron doors. Iron doors make a better choice for personal homes and buildings you want to keep villager-and-zombie-free.

    You May Like: How To Build A Hobbit Hole In Minecraft

    Part 3 Of 3: Creating The Door

  • 1Equip the sticky pistons. Select the sticky pistons in the equip bar.
  • 2Place a sticky piston in front of each of the raised blocks. Face one of the blocks that’s covering a redstone torch, place the sticky piston in front of it, and repeat for the other raised block.
  • 3Place a sticky piston on top of both sticky pistons. Face one of the sticky pistons, select the top of it, and repeat for the other piston.
  • 4Place redstone on each of the raised blocks. Doing so will activate the top sticky pistons.
  • 5Place your door’s material on each sticky piston’s front. All told, you should end up with four solid blocks in the center of the sticky piston frame.
  • 6Place two pressure plates in front of and behind the door. This will leave you with a pressure plate on the ground directly in front of and behind each column of door material.
  • 7Test out your door. Step on both pressure plates at once to prompt the doors to open, then walk through your door. You should be able to get through without any trouble.
  • You can build around your door to disguise the mechanism.

    Most Popular

    Minecraft Free For Pc

    Minecraft On Raspberry Pi