Thursday, May 23, 2024
HomeExclusiveWhat Does The Beacon Do In Minecraft

What Does The Beacon Do In Minecraft

Where To Place Your Beacon

How To Use a Beacon in Minecraft! Tutorial! #10

If you want to have more than just a pretty laser firing into the blocky sky, you’ll need to place your beacon on top of a pyramid. The pyramid is what grants your beacons additional powers, and can grant any players within its vicinity huge buffs that are awesome for your primary base.

The pyramid can have up to 4 levels and must be constructed out of iron, gold, diamond, or emerald. Not ore, but solid blocks constructed out of 9 ingots or gems, respectively. Fortunately, it doesn’t matter in the slightest which of these materials above you choose to use, and you can mix and match as much as you want. As long as the entire pyramid is built from these materials in some way, your beacon will shine.

On top of that, there cannot be anything obstructing the beacon’s view of the sky. Other beacons, glass blocks, and similar transparent blocks are acceptable, but anything else will cause the beacon to stop functioning. Basically, you can’t have a secret beacon.

You’re not just limited to one beacon, either. You can erect a single pyramid to house any number of beacons, theoretically, which could net you additional perks beyond what a single beacon is capable of accomplishing. To garner the full effects of a beacon, however, you’ll want to have four levels to your pyramid in total.

How Do You Get Rid Of Mining Fatigue

Mining Fatigue III is the only level of mining fatigue that can be obtained without the use of cheats. Like all status effects, it can be removed by drinking milk. If you gain this effect by an elder guardian it will show a transperant ghostly image of an elder gaurdian flying from the top of the screen to the bottom.

Beacon Tips And Tricks

You’ve defeated the Wither, found the mysterious Nether star, constructed the awesome beacon, spent a horrifying amount on building a pyramid for it, and have fully powered it up and upgraded it. Did you think you were done there? There are still a few tips and tricks you can use to get the most out of your beacon.

Recommended Reading: What Is The Random Tick Speed In Minecraft

What Is Respiration In Minecraft

In essence, Minecraft’s respiration enchant works to help the player breathe underwater. Without any enchantments or potion effects, Minecraft players can hold their breath for approximately 15 seconds before running out of air and starting to drown.

Respiration enchantments work to elongate the amount of time that a player can stay submerged under the water before drowning, and the difference is astronomical.

Interaction With Mining Fatigue

Minecraft Beacon setup

Mining Fatigue III inflicted by elder guardians prevents the player from instant mining most blocks regardless of the Haste effect, along with a huge decrease of mining speed. However, lower levels of Mining Fatigue can be overcome by Haste of level III or greater, with a resultant reduced Haste effect.

You May Like: How To Make An Animal Upside Down In Minecraft

How To Make A Beacon In Minecraft

This article was written by Jack Lloyd. Jack Lloyd is a Technology Writer and Editor for wikiHow. He has over two years of experience writing and editing technology-related articles. He is technology enthusiast and an English teacher.The wikiHow Tech Team also followed the article’s instructions and verified that they work. This article has been viewed 907,239 times.

Beacons are symbols of status and prestige in Minecraft. Only the best players have them since they require a lot of expensive materials as well as the Nether star, which you can only get by summoning and defeating the super challenging Wither. If youre up for the challenge, check out the steps below. This article will walk you through everything you need to do craft a beacon and build a tower for it.

What Is The Range Of A Beacon In Minecraft

Beacons are a placeable block in;Minecraft;that buff players with status effects like Speed, Haste, and Strength. However, these status effects only work within a certain range, which varies based on how many resources blocks you have beneath it. Weve explained how these ranges work below.

You May Like: How Do I Make Terracotta In Minecraft

Finding A Nether Star

  • Get to the Nether by making a Nether Portal.
  • In the Nether, mine at least four blocks of soul sand. These are gray-brown blocks found on the ground throughout the Nether.
  • Collect three wither skeleton skulls. Wither skeletons are difficult enemies found in fortresses throughout the Nether, and have a 2.5 percent chance to drop a skull when killed.

    Wither skeletons are harder to kill than regular skeletons. William Antonelli/Insider

  • In either the Nether or Overworld we’d recommend the Overworld, since there’s more room to run around stack the soul sand in a “T” shape, and place the three skulls on top of the sand. Once you’ve done it, run away.
  • In a few seconds, the Wither will spawn and create a massive explosion around itself. Once the explosion fades, fight and kill it. How you do that is up to you, but be careful.

    The Wither will take a few moments to fully spawn once it does, it’ll explode. William Antonelli/Insider

  • Once the Wither is killed, it’ll drop a Nether Star.
  • How To Use It

    How To Use A Beacon! The Minecraft Survival Guide (Tutorial Lets Play) [Part 54]

    To activate a beacon, you must adhere to two requirements. The first is that the beacon must have a clear view of of the sky. This is to allow the light to shoot up into the sky.

    The second requirement is that the beacon must be placed on top of a pyramid made of diamonds, emerald, gold or iron blocks.

    If youve placed a beacon down after having met those requirements, you should see it shoot a beam of light into the sky.

    Once your beacon is set, you can feed it either an iron or gold ingot, an emerald or a diamond. After feeding the beacon one of these materials, open up the beacons menu. Here, youll see primary powers and secondary powers. The secondary power will always be its light source and its regeneration ability.

    In the primary power section, you can select one of five powers: speed, haste, resistance, jump boost or strength.

    Thats it for our guide on how to make a beacon and use it in Minecraft.

    For more information about Minecraft, be sure to search for whatever youre looking for on Twinfinite. There, we cover everything Minecraft related as well as news, previews, reviews, quizzes, features, guides, and more for all of your other favorite games as well.

    Here are some other Minecraft guides to get you started:

    Read Also: Spectral Arrows In Minecraft

    Crafting The Beacon Pyramid

    A beacon will only activate when placed on a pyramid. To build this pyramid, you’ll need iron, gold, emerald, diamond, or netherite blocks. You can use just one or all of these four resources together when building your pyramid however, you’ll need a lot of them.

    Quick tip: Iron, gold, and netherite blocks are made by crafting a full 3×3 grid of their respective ingots. Emerald and diamond blocks require a full 3×3 grid of regular emeralds or diamonds, respectively.

    Pyramids can have up to four levels, with each level giving the pyramid more powers and a wider range.

    • A level one pyramid will require a 3×3 base, which takes 9 blocks.
    • A level two pyramid will require a 5×5 base and a 3×3 top, which takes 34 blocks.
    • A level three pyramid will require a 7×7 base, 5×5 second layer, and a 3×3 top, which takes 83 blocks.
    • A level four pyramid will require a 9×9 block base, 7×7 second layer, 5×5 third layer, and a 3×3 top, which takes 164 blocks.

    Once you’ve built your pyramid, place the beacon on top, in the very center spot. It’ll activate immediately.

    How To Change The Beacon’s Light Color

    Your pyramid can be made out of any combination of emerald, diamond, gold, iron, or netherite. This is great for making it stand out in the world.

    Even cooler, though, is the ability to customize the color of your beacon’s light. To do this, place a stained glass window on top of the beacon. It’ll tint your light the same color as the glass.

    You can make stained glass by filling a 3×3 crafting grid with glass, but swapping out the middle piece for whatever color dye you like.

    You May Like: How Do You Make Stew In Minecraft

    What Does Conduit Power Give You

    Conduits grant immense power. Literally an area-of-effect status called conduit power. Conduit power combines the effects of water breathing, night vision, and haste status effects, which is a pretty nifty combo when underwater. Conduits also emit light and damage nearby hostile mobs in contact with water.

    Whats Needed To Craft A Minecraft Beacon

    How to Use Beacons in Minecraft!

    5 Glass Blocks

    • Of all the items needed to craft the beacon, glass is the easiest. All it takes to make it is smelting sand in a furnace. Once all 5 are ready, place 3 on the top row of the crafting grid and 2 on the left and right side of the middle row.

    3 Obsidian

    • Most Minecraft players know obsidian as the block needed to create Nether portals, but theyre also used to construct beacons. Its formed when lava and water interact with one another and must be placed on the bottom 3 slots in the crafting grid.

    1 Nether Star

    • The last and rarest material is the Nether Star, which is placed in the very center of the crafting grid. In order to obtain this essential item, players must defeat the terrifying Wither boss. Its summoned by placing 4 Soulsand in a T formation and placing 3 Wither Skeleton skulls on top of the top 3 blocks. This scary opponent can fly and fire ranged attacks, so players ought to prepare as many arrows as they can and enchant their swords if they want to successfully take it down.

    Don’t Miss: What Does Heart Of The Sea Do In Minecraft

    How To Craft A Beacon

    The crafting recipe for constructing a beacon is relatively simple: a dome of 5 glass blocks, a base of 3 obsidian blocks, and a single Nether star nestled in the middle. Sounds easy enough, but crafting a beacon first requires that you, well, actually have all of these resources. The former ingredients are easy to come by, but the latter? You have to summon and defeat the Wither,, which has its own process and requirements to complete.

    The Wither is one of the big bosses in Minecraft, right alongside the Ender Dragon. When you defeat it, it drops a single Nether star, which will allow you to craft a single beacon. Want more beacons? Beat more Withers. It’s not a fight to be taken lightly, however, so make sure you’re duly prepared.

    How To Craft A Beacon In ‘minecraft’

    Once you’ve got the materials, crafting the beacon is easy.

    Go to a workbench, and add:

    • Three pieces of glass to the top row.
    • One glass, one Nether Star, and one glass to the middle row.
    • Three obsidian to the bottom row.

    This will craft a beacon.

    However, a beacon by itself is useless. To shoot a beam of light into the sky, as well as tap into a beacon’s true upgrading power, you’ll need to place it on top of a pyramid.

    Also Check: Can You Get Mods On Nintendo Switch Minecraft

    Minecraft Beacon Crafting: How To Light A Beacon In Minecraft

    Become the envy of all the Steves, with our guide to crafting a Minecraft beacon

    Creating your first Minecraft beacon? Or just looking into the possibility of how to craft this rare and valuable item. A beacon in Minecraft will set you back a pretty penny in resources and time and there are a ton of materials youll need to obtain which sadly wont be as easy as sprinting around the world and mining a couple of blocks no.

    Crafting a Minecraft beacon is an incredibly lengthy process, but the rewards are certainly worth it. Youll be granted status effects such as speed, jump boost, haste, regeneration, resistance, and strength to yourself and nearby players. When the beacon in Minecraft activates it will emit a beam of light into the sky which can be seen from far away, a flashy sign that youre the new owner of this dazzling and sought after item.

    Heres everything you need to know about Minecraft beacons including the recipe to make them, how to get all of the items required to build a beacon, steps for setting them up, and the powers you can expect to wield once your beacon is up and running.

    Haste Speed Jump Boost And Regeneration

    What to do with a Beacon in minecraft

    Once the Beacon is ready, the Beacons menu will open by interacting with it.

    As you can see, it has secondary and primary powers, such as jump boost, speed, and more.

    In order to use these powers, you need to sacrifice one gold ingot, iron ingot, diamond or emerald to the Beacon.

    The primary powers depend on the level of the pyramid, while the secondary status effects can only be activated by having a full-sized pyramid.

    You May Like: How To Craft Stairs In Minecraft

    Best Uses Of A Beacon In Minecraft

    The beacon in Minecraft can be used in a multitude of ways depending on a few different variables.

    Minecraft beacons were brought into the game through version 1.4, named the “Pretty Scary Update,” along with a list of mobs, foods, etc. Many players may not know that the beacon does more than producing a beam of light into the sky.

    If a player is trying to become The Beaconator or is trying to know how the beacon works in Minecraft, this article will help them understand better.

    Note: This article is subjective and solely reflects the opinion of the writer.

    How To Make And Use A Beacon In Minecraft Pe Mcpe 01:

    What is a Beacon?

    A Beacon is a type of structure, or device, that you can build from one of many kinds of resources on your Forge. Each Beacon can be made of anything . They are generally used for crafting or decorative purposes and are usually built to fit the Minecraft Forge and the block they are connected to. If you want to make a beacon with a single ore or resource , you must place multiple Beacon resources on your Forge. A beacon will be consumed and destroyed when the block it is connected to is destroyed.

    What does a Beacon do?

    A Beacon uses energy from one of the resources you are connected to. It does one of two things:

    When your Beacon consumes the resource, it sends a signal to another Beacon. That signal will be read to a nearby block, or other devices, on the players side and if they have a connected Beacon, it will emit a sound and alert you.

    When you click on the Beacon with a key , it sends its message, which is then passed to another Beacon. A beacon will continue to consume the given number of resources until it runs out of energy.

    A beacon consumes a resource if you press the key. When that resource is consumed, the key will be returned to your inventory. The Beacon will continue to consume the same resources until it runs out.

    What resources can make a Beacon?

    There are many different resources you can make a Beacon from in Minecraft PE:

    1. An ore.

    3. An enchantment or potion.

    4. A stone block.

    What types of resources can I make a Beacon with?

    Read Also: How To Change Minecraft Gamertag On Nintendo Switch

    Things Players Need To Know About Beacons In Minecraft

    Beacons are one of the most unique blocks in Minecraft. Besides acting as a navigational tool, Beacons also provide the player with a plethora of useful status effects, from Strength to Regeneration.

    As seen in the image above, Beacons can also be used as decoration due to their colorful beams of light. While Beacons are extremely powerful, most players are not significantly knowledgeable of them due to their difficulty to craft.

    How To Activate A Beacon In Minecraft

    How to use the Beacon in Minecraft 1.6.4

    Now that you have a recently crafted Beacon, its time to activate it. In order to do this, you will need to build a Beacon Pyramid.

    Still, this can only be done with the following solid blocks :

    • Iron Blocks;
    • Emerald Blocks;
    • Diamond Blocks.

    You can make an entire pyramid by mixing these materials, so it is possible to combine a layer of gold, emerald, diamond and iron blocks to have a fully activated Beacon Pyramid.

    You May Like: Where To Get Cocoa Beans Hypixel Skyblock

    How To Build A Pyramid For The Beacon In Minecraft

    To activate a Beacon, you must place it on top of a Pyramid. The Pyramid must be built from Iron, Gold, Diamond, Netherite, or Emerald blocks. You can use a mixture of these if you dont have enough of a single type of block.

    You must make the Pyramid with between one and four layers. The taller you make the Pyramid, the more effects you can gain from the Beacon. The size of the Pyramid also increases the range within which you can gain the status effects.

    To get the most out of your Beacon, you should make a 4-level Pyramid. For the base layer, place your blocks in a 9×9 square. Then, place a 7×7 square on top, followed by a 5×5 square and then a 3×3 square for the top layer. When you have constructed the Pyramid, place your Beacon on top of the centre block on the top layer to activate it.

    If you dont have enough blocks to make a Pyramid with 4 layers, you can remove the bottom layer to make it a slightly weaker Pyramid. For example, if you only have enough blocks for 3 layers, you can make the base layer the 7×7 square and then keep building up to make a 3-level Pyramid. However, this will remove some of the possible bonus effects.


    Most Popular

    Minecraft On Raspberry Pi

    Minecraft Free For Pc