How To Use Teleport Commands
Teleport commands allow for player and entity travel , transporting to specific coordinates as well as being able to rotate the entity to face in a particular direction or at another entity
Teleport commands in Bedrock Edition are written slightly differently, though they have the same effect. Additionally, Bedrock Edition allows you to check for blocks at the target destination to prevent player or entity suffocation using the checkForBlocks extension to your command.
List Of Teleport Commands In Minecraft
The teleport command can take many forms, but here are some of the most common and useful ones:
/tp < location x y z>
The destination is composed of three coordinates . Enter the desired coordinates in place of the x y z. For example, /tp 100 50 100 will move the player to a block that is at the coordinates x=100, z=100, and has a height of 50.
Players can also use references to their current position. A command /tp 50 ~4 50 will move the player to the block that has x=50, z=50, and that is four blocks above their current location.
/tp < destination>
When used this way, a player will teleport to the target entity. You can use a players name, a specific entity name, or the targets UUID, or a unique identifier.
/tp < target> < destination/location>
Rotation: /tp < destination/location> < yRot> < xRot>
Each of the above commands can also have an optional argument for rotating the target towards a specific location. When used, the command needs two additional numbers. The yaw goes between -180 and 180 and describes which side of the world the entity will face after rotation . The pitch shows how the target will face up or down . You can use a reference marker to use the targets current yaw and pitch and add or subtract from it.
For example: /tp Steve 151 60 134 -90 0 will teleport the player named Steve to the coordinates then rotate him to face east and look straight ahead.
Facing < entity/coordinates>
Checking for Blocks
The Execute Command in JE
How To Edit Server Properties In Minecraft
We have a video tutorial on how to configure your Minecraft server:
The wtbblue.comerties file is where your server’s configurations and settings are stored.
While the default configuration of a new Minecraft server works for most situations, you may wish to customize your server by tweaking a few of the configuration options and this will require you to modify the wtbblue.comerties file. Doing this is made easy with the Multicraft control panel so you won’t have to manually edit the file directly from your server directory.
All Minecraft servers from Shockbyte come with our customized version of the Multicraft panel so that you can configure and setup your new Minecraft server easily. You can log into the panel through this link: wtbblue.com
In this guide, we will discuss how to configure your Minecraft server and some of the configuration options available to you in the server control panel, without needing to manually modify the wtbblue.comerties file!
HOW TO ACCESS YOUR SERVER SETTINGS IN MULTICRAFT
*NAME**KEYDEFAULT VALUEDESCRIPTION Spawn Monsters spawn-monsters true
Controls whether or not monsters or hostile mobs will spawn.
Acceptable values are true or false.
Player vs Player pvp true
You May Like: How To Change Minecraft Gamertag On Nintendo Switch
Type The Teleport Command
Now, players must type /teleport followed by their player name. After this, they should type the name of the player they want to teleport. Alternatively, the player can type a set of x y z coordinates that they would like to teleport to.
An example of a teleport command would be /teleport Player1 120 50 250. This would teleport a player with the name “Player1” to the coordinates: x= 120, y= 50, z = 255.
Another example of a teleport command would be “/teleport Player1 Player2”. This specific command would teleport the player with the name “Player1” to the player with the name “Player2.”
Example In Java Edition 111 And 112
To teleport the player named DigMinecraft to the player named Steve in Minecraft 1.11 and 1.12:
/tp DigMinecraft Steve
To teleport the player named DigMinecraft to relative coordinates :
/tp DigMinecraft ~53 ~-6 ~17
To teleport a random player to a specific set of coordinates :
To teleport all cows to the coordinates :
Recommended Reading: When Were Shields Added To Minecraft
How To Teleport In Minecraft:
After having a basic knowledge of coordinates, you should now need to know how to teleport your character. For that, you need to press T or / for the command window and then follow the syntax as mentioned below:
This is a general syntax for everyone, and where tp is the command used to teleport followed by the user accounts name, and the last one is the three coordinates where you want to teleport your character.
You can also teleport one user to another, such as:
This command will teleport James to Sams location.
Can A Command Block Be Used To Teleport A Player
When a player stands on the pressure plate, the command block will be activated. Now the player should be teleported to the desired coordinates. Congratulations, you have learned how to program a command block to teleport a player to another place in the game. Here are some command block programs that you can try:
You May Like: What Is The Random Tick Speed In Minecraft
Teleport Command In Minecraft Java Edition
In Minecraft Java Edition 1.13, 1.14, 1.15 and 1.16, there are different syntaxes depending on who or where you are teleporting.
To teleport to a set of coordinates:
/teleport < location>
To teleport to the location of another target:
/teleport < destination>
To teleport a target to the location of another target:
/teleport < targets> < destination>
To teleport a target to a set of coordinates facing the direction of another set of coordinates:
/teleport < targets> < location> facing < facingLocation>
To teleport a target to a set of coordinates and rotate the direction the target will be facing:
/teleport < targets> < location>
In Minecraft Java Edition 1.10, 1.11 and 1.12, the syntax to teleport an entity to a set of coordinates is:
/teleport < entity> < x> < y> < z>
- location or x y z is the to teleport to.
- destination is the name of a player to teleport to.
- targets or entity is the name of a player to teleport.
- facingLocation is the that the entity will face after being teleported.
- yRot or y-rot is optional. It is the y-rotation that the entity is facing after teleportation in degrees. 0=South, 90=West, 180=North, 270=East.
- xRot and x-rot is optional. It is the x-rotation that the entity is facing after teleportation in degrees. Positive values look downward and negative values look upward. 0=facing forward, 90=facing straight down, -90=facing straight up
How To Teleport To Coordinates In Minecraft
Getting lost in Minecraft is generally never a good thing, whether in a single-player or multiplayer environment. It can be sometimes frustrating and fatal as well. This article will get to know how you can go to a specific place in Minecraft instantly. When utilizing host rights for a multiplayer game, you may also teleport to a specific players location in the world immediately, no matter how far away they are from your location. You can activate the cheats from the game menu and apply them using the command window.
Commands are similar to cheat codes that Minecraft players may use to make the game simpler, and their usage is relatively easy. When creating a new world, all players need to do is enable cheats. Theyll be able to type cheats into a text field after that.
The teleport command is one of the numerous commands available to players. Players can use this command to teleport themselves, other players, or even creatures throughout the map. To activate the commands enable cheats. It is best to do this when building a new world since this will ensure that the cheats remain active every time you open the world. There are three modes available which are creative,survival, and hardcore. You can select either creative or survival mode to apply these cheats and can select them using the Game mode option as shown below.
Also Check: How To Install Minecraft Mods On Nintendo Switch
How Coordinates Work In Minecraft
When you enter coordinates in Minecraft, you need to provide three variables: X, Y, and Z:
- X: The X coordinate represents longitude. As the player moves east, the value of X increases. As the player moves west, the value of X decreases.
- Y: The Y coordinate represents elevation. As the player moves up, the value of Y increases. As the player moves down, the value of Y decreases.
- Z: The Z coordinate represents latitude. As the player moves south, the value of Z increases. As the player moves north, the value of Z decreases.
One unit represents one block. Sea level for the overworld is 64Y, and the lava sea level is 11Y. In the Nether, the lava sea level is 31Y.
To display your current coordinates in the Java Edition, press Fn+F3 . In Bedrock Edition, enable Show Coordinates in the world settings.
How To Use Teleport In Minecraft
To teleport in Minecraft, you will need to have commands enabled either by being a server administrator or having cheats enabled in-game. After that, to teleport, all you need to do is type the following commands into the chatbox – this method is for the java version of Minecraft, except for the first two commands.
- /tp – This will teleport you to another player if you type their username after the teleport command.
- /tp – This command will teleport another player to a location of a different player.
- /tp – This will teleport you to a set of coordinates.
- /tp – This command will teleport a player to a set of coordinates and will rotate where they will be facing.
- /tp facing – This tp command will teleport a player to a set of coordinates and will face them in the direction of another set of coordinates.
If you want to use any of the commands listed above, all you need to do is type /tp and then whatever the command is you wish to use after it in the chatbox. However, keep in mind you will need to enable cheats or be a server admin before you can use these commands. If you want to enable cheats, you can do so via an option in the game’s options menu or by opening the game to lan.
You May Like: What Can You Do With Slimeballs In Minecraft
Enable Waypoint Teleportation Feed The Beas
Minecraft commands and cheats are every bit as creative a tool as Minecraft itself.Using Minecraft’s in-game console you can teleport to various locations, change the time or weather, spawn items or entities, chat with your friends, or control entire servers filled with people This is where Minecraft Console Commands and Cheats come in. Console Commands in Minecraft are incredibly simple to use. Prior to creating a world, you will be asked whether to enable cheats or not this is a very awkward question as a basic command but I will answer it this is the command the command is The play area of Minecraft is enormous. Indeed there are high chances that you might get lost and don’t know what to do next. Well, there’s. Detects the lag between you and the server. Server is hosted in USA. /r: Replies back to a player that sent you a message. /rules: Displays server rules. /seen: Displays last logout time of a player. /sethome ,/home: Sets the teleport location when you type /home. /spawn: Teleports you to the server main city. /suicid How do I promote my minecraft server effectively? How to Advertise Your Minecraft Server Vote Top-Sites Your Minecraft server should be submitted to all the major vote top-sites. Forum Advertising For brand new Minecraft servers, forums are one of the best forms of free advertising. Reddit Paid Minecraft Server Advertising
Teleporting In Minecraft On Desktop
When using the desktop version of Minecraft, players are limited to the Java and Bedrock Editions of the game . There are no functional differences between how to execute the command in the game. However, players will need to enable cheats to use the command console.
Heres how to enable cheats on an ongoing world in Java Edition:
If youre using the Bedrock Edition:
Players can also choose to enable cheats when creating their world. For the Java version, follow these steps:
When using the Bedrock Edition, the Enable Cheats switch will be located on the right-hand side of the world creation menu. Flip it to activate cheats and console commands for the world.
Once youve enabled cheats in the current world instance, running the command is simple. You can press T to open a chat window or press / to open the chat window and immediately have the first character of the command put in for you.
Once youve input the command, press Enter to run it. In some cases, the game will show an error if one of the arguments is incorrect, incomplete, or the command cant run. If the command succeeds, it will display the message in the chat window saying Teleported < target> to < coordinates> .
Setting Warmups And Cooldowns
This can be achieved using the commands.conf file for the commands tpa, tpahere and teleport. The options arewarmup and cooldown, and are specified in seconds. Note that each command has a specific warmup/cooldown, so/tpa can have a 1 second warmup, while a standard /tp can have a 3 second warmup.
If the player moves, runs a command or is attacked during the warmup, the teleport is cancelled. The player is then freeto try again, a cooldown is only applied when the teleport is successful.
For /tpa and /tpahere, the warmup starts when the teleport request is accepted and acts on the player being teleported,sending the request is instantaneous.
List Of Useful Minecraft Commands
Here’s a list of common commands that can improve your Minecraft experience:
How to change the gamemode of a player in Minecraft
/gamemode < 0/1> < player> In the player spot, you will put the name of the person of whom you want to change the gamemode of, this could be yourself or another player on the server. In the next part, you will either put “0” which is Survival or “1” which is Creative. The brackets are not used. For example, a sample command would say: /gamemode 1 Carpetfizz which will change my game type to Creative mode.
How to teleport a player to another player in Minecraft
/tp < player> < target>
Don’t Miss: How To Grow Amethyst In Minecraft
Teleporting In Minecraft On Pc
How To Add Commands On Minecraft Server
If you using a Minecraft vanilla server and want to know the best serer commands to smoothly run your server ecosystem, this guide will cover it all for you.
Minecraft is a highly popular Sandbox video game that has been developed by Mojang. The game is developed using Java language and its creator is Markus Notch Persson. The development was later taken over by Jens Bergensten towards the end of November 2011.
This 2009-released game has been constantly gaining popularity for the last many years due to its innovative appeal and extended freedom given to the players. Its popularity has also turned the game into a commercial success.
In 2020 the Minecraft with RTX is available for Windows 10 at the time of we are writing this and you can play Minecraft online on a SeekaHost Game server.
One of the most popular ways to earn a good income from Minecraft is to make or buy Minecraft server and earning from it in diverse ways like accepting donations, selling ad space, and other ways of monetizing your server. In one of our past articles, we told you how to make a Minecraft server. If you wish to know how to earn from your Minecraft server then you can read our other article.
Don’t Miss: Build Your Own Hobbit Hole
Common Issues Or Unusable Commands
There is a possibility that the commands you’re attempting to run through the command block won’t work. This could be because the block contains restrictions on the types of commands it can successfully execute. Command Blocks carry out operations with permissions set to 2. So the following commands are out of the question: /ban, /banlist, /ban-ip, /debug, /deop, /