Locate Command In Minecraft Ps4 Edition
In Minecraft PS4 Edition, the syntax to find the closest coordinates of a structure is:
/locate < feature>
Definitions
-
feature is a structure that you wish to find. The /locate command will return the coordinates for the nearest type of feature you select. It can be one of the following:
feature Nearest buriedtreasure Nearest ruins Nearest
Example In Java Edition 111 And 112
To find the coordinates of the nearest Woodland Mansion in Minecraft 1.11 and 1.12:
/locate Mansion
To find the coordinates of the nearest Village:
/locate Village
To find the coordinates of the nearest Abandoned Mineshaft:
/locate Mineshaft
To find the coordinates of the nearest Pillager Outpost in Minecraft PE:
/locate pillageroutpost
To find the coordinates of the nearest Woodland Mansion:
/locate mansion
To find the coordinates of the nearest Village:
/locate village
To find the coordinates of the nearest Stronghold:
/locate stronghold
Where To Find A Nether Fortress
In Minecraft, a Nether Fortress is a structure that spawns naturally in the game. It looks like a giant castle made out of nether bricks and is only found in the . There can be many Nether Fortresses that spawn in the Nether.
Here is a picture of what a Nether Fortress looks like with :
The outside of the Nether Fortress is made from . The Fortress is made up of a series of bridges and is suspended by large pillars as it towers above the lava below.
Quite often, a Nether Fortress will spawn partially inside of netherrack. This can sometimes make it difficult to find the fortress.
TIP:
Also Check: Minecraft Drawbridges
Fill Command In Minecraft Ps4 Edition
In Minecraft PS4 Edition, there are 2 syntaxes for the /fill command.
To fill a region with a type of block:
/fill < from> < to> < tileName>
To replace one type of block in a region with another type of block:
/fill < from> < to> < tileName> replace < replaceTileName> < replaceDataValue>
Definitions
- from is the starting x y z coordinate for the fill region .
- to is the ending x y z coordinate for the fill region .
- tileName is name of the block to fill the region.
- tileData is optional. It is the data type or variation of the block if more than one type exists for that tileName.
- replace will replace all blocks in the fill region, including air.
- outline is optional. It will replace blocks on the outer edge of the fill region, but does not replace the inner blocks.
- hollow is optional. It will replace blocks on the outer edge of the fill region, and replaces inner blocks with air.
- keep is optional. It will replace only air blocks in the fill region.
- destroy is optional. It will replace all blocks in the fill region, including air. Replaced blocks will be dropped and can then be collected as if they were mined with a pickaxe or shovel.
- replaceTileName is the name of the block that will be replaced.
- replaceDataValue is the variation of the block to be replaced if more than one type exists for that replaceTileName.
This Is Your New Home Now

Now that you know how to find Villages in Minecraft, and even kidnap Villagers to create your own, youll find life much easier than just being a lone wolf. You can trade and populate the Village so it grows in size and inhabitants. Looking for one in the wild isnt too hard either.
What was the luckiest trade youve ever had? Have you ever spawned right beside a Village before? Let us know in the comments section below.
Also Check: How To Make A Cat Banner In Minecraft
Woodland Mansion In Minecraft
The Woodland Mansion is available in the following versions of Minecraft:
Platform |
---|
Yes |
* The version that it was added or removed, if applicable.NOTE: Pocket Edition , Xbox One, PS4, Nintendo Switch, and Windows 10 Edition are now called Bedrock Edition. We will continue to show them individually for version history.
How To Make A Village
If you want to make a Village near your base, there are a few ways of doing so. The easiest one is to spawn a few Villagers using commands, but if you want to do it the old-fashioned way, follow these steps:
1. Build some houses for the Villagers.
2. Make sure there are beds inside for the game to register it as a house.
· For our first method, well lure some Zombie Villagers.
3. You need a Splash Potion of Weakness and Golden Apple for each Zombie Villager.
4. Lure them towards your Village.
5. Throw the potion on them.
6. Feed them Golden Apples.
7. Now theyll start trading with you and even potentially breed for more Villagers.
This method grants you discounted prices since the Villagers are grateful after you cure them. Our next method is harder, but Villagers are easier to get. You just need some patience.
1. Have a proper Village ready.
2. Make a boat.
3. Force a Villager into the boat by pushing them into it or driving it into a Villager.
4. Get into the boat and make the long trip to your Village.
5. Do it again if you want to breed the Villagers.
We did warn you that it would take longer. Boats work on the land, but theyre slow, and the mobs will be faster. This means you need to protect your Villager too.
Don’t Miss: Light Brown Dye Minecraft
How To Use The Locate Command In Minecraft
This Minecraft tutorial explains how to use the /locate command with screenshots and step-by-step instructions.
Now you can quickly and easily find interesting structures in Minecraft with the /locate command. This amazing command allows you to find the of the nearest , Ocean Ruin, , , , , , , , , , , , or .
You can then use the to teleport there instantly!
Let’s explore how to use this cheat .
The /locate command is available in the following versions of Minecraft:
Platform |
---|
Yes |
* The version that it was added or removed, if applicable.NOTE: Pocket Edition , Xbox One, PS4, Nintendo Switch, and Windows 10 Edition are now called Bedrock Edition. We will continue to show them individually for version history.
How To Use Minecraft Commands And Cheats
To use a Minecraft command or cheat, all you need to do is hop into your Minecraft game and tap the “/” key to open up the console. Every command in Minecraft must start with a “/”, but using this shortcut will automatically add the “/” prefix so you can just start typing the command you want to use.
Minecraft commands are case-sensitive .
Below we’ll go over the most useful Minecraft commands and cheats to know. All the arguments for a command have been surrounded by either or . Angle brackets mean that the argument is required, while square brackets mean that the argument is optional.
You May Like: How To Make Chat Smaller In Minecraft
How To Use The Fill Command In Minecraft
This Minecraft tutorial explains how to use the /fill command with screenshots and step-by-step instructions.
You can fill an area or outline with a particular block using the /fill command in Minecraft. Let’s explore how to use this cheat .
The /fill command is available in the following versions of Minecraft:
Platform |
---|
Yes |
* The version that it was added or removed, if applicable.NOTE: Pocket Edition , Xbox One, PS4, Nintendo Switch, and Windows 10 Edition are now called Bedrock Edition. We will continue to show them individually for version history.
Minecraft Locate Command Not Working: 4 Fixes
Minecrafts different mechanics make the game even more entertaining and fun to play than it already is, and the fact that the game also allows players to use command prompts is a great plus too. These command prompts allow players to type-specific commands in order to spawn, destroy, receive, locate etc. all sorts of different things across the games world. These prompts are actually highly useful depending on the circumstances and can also make the game more fun if you use them right. However, they also present their fair share of problems sometimes.
Read Also: How To Make Beet Soup In Minecraft
How Can I Find My Pet Wolves That I Told To Sit
I told my wolves to sit down and I accidentally forgot to tell them to stand up and I left them. Now I cannot find them, how do you get back to your wolves if they are lost?
- I would imagine you might be able to construct a command that will tp the wolves to your location. BenDec 8 ’14 at 0:58
If you’re not opposed to cheats, you can theoretically teleport just your wolves with a series of three commands:
What this does is sets up a scoreboard to select your wolves, sets it for all wolves that are sitting, and teleports those wolves to you.
Alternatively, you could teleport all wolves with just one command:
Keep in mind, though, this will only work for wolves in loaded chunks. So you’re going to need to be within about 8 chunks of where your wolves were last, and also in the same dimension. But if you know approximately where they are, within several hundred blocks, and are open to cheating, this would work.
If you happened to be on a server, the “all that are sitting” method might not work out too well. For that, assuming you also have access to cheats there, replace Sitting:1 with OwnerUUID=”< your UUID here> “. You’ll need to figure out your UUID and copy it in. But, if you’re in single player, checking to see if they are sitting will work just fine.
In newer versions of minecraft you can use NBT in your target selector. Teleporting all of your wolves to you can therefor be done somewhat easily with a command like this:
How To Use The Kill Command In Minecraft

This Minecraft tutorial explains how to use the /kill command with screenshots and step-by-step instructions.
You can kill a player or a type of mob using the /kill command in Minecraft. Let’s explore how to use this cheat .
The /kill command is available in the following versions of Minecraft:
Platform |
---|
Yes |
* The version that it was added or removed, if applicable.NOTE: Pocket Edition , Xbox One, PS4, Nintendo Switch, and Windows 10 Edition are now called Bedrock Edition. We will continue to show them individually for version history.
Recommended Reading: Where To Get Cocoa Beans Hypixel Skyblock
Locate Command In Minecraft Nintendo Switch Edition
In Minecraft Nintendo Switch Edition, the syntax to find the closest coordinates of a structure is:
/locate < feature>
Definitions
-
feature is a structure that you wish to find. The /locate command will return the coordinates for the nearest type of feature you select. It can be one of the following:
feature Nearest buriedtreasure Nearest endcity Nearest ruins Nearest Ruins shipwreck Nearest stronghold Nearest
How To Use The Locate Command
In MineCraft 1.11, a new locate command was added. This command shows the coordinates of the closest EndCity, Fortress, Mansion, Mineshaft, Monument, Stronghold, Temple and village or other special buildings/structures in newer versions of Minecraft.
All you have to do is use the following command:
/locate
You can then use tab and it shows the different arguments you can use. Or you can just write the argument. Like
/locate EndCity
Which will show the nearest EndCity
In newer versions there is also a Buried_Treasure, EndCity, Fortress, Mansion, Mineshaft, Monument, Ocean_Ruin, Shipwreck, Stronghold, Desert_Pyramid, Igloo, Jungle_Pyramid, Swamp_Hut, Village and Pillager_Out
So best advice would be to write /locate TAB, and then use the tab button, to see which kind of arguments you can use in the version of Minecraft that you plays.
Recommended Reading: How To Make Flaming Arrows In Minecraft
Kill Command In Minecraft Java Edition
In Minecraft Java Edition 1.13, 1.14, 1.15, 1.16, 1.17 and 1.18, the syntax to kill a target is:
/kill < targets>
In Minecraft Java Edition 1.8, 1.9, 1.10, 1.11 and 1.12, the /kill command has different syntaxes depending on who/what you would like to kill.
To kill all entities :
/kill
To kill a specific player or mob:
/kill < player>
Definitions
- targets or player is the name of the player that you wish to kill.
Tp Command In Minecraft Nintendo Switch Edition
In Minecraft Nintendo Switch Edition, there are different syntaxes depending on who or where you are teleporting.
To teleport to a set of coordinates:
/tp < x> < y> < z>
To teleport to a set of coordinates facing the direction of another set of coordinates:
/tp < x> < y> < z> facing < lookAtPosition>
To teleport to a set of coordinates facing the direction of a target entity:
/tp < x> < y> < z> facing < lookAtEntity>
To teleport a target to a set of coordinates:
/tp < victim> < x> < y> < z>
To teleport a target to a set of coordinates facing the direction of another set of coordinates:
/tp < victim> < x> < y> < z> facing < lookAtPosition>
To teleport a target to a set of coordinates facing the direction of a target entity:
/tp < victim> < x> < y> < z> facing < lookAtEntity>
To teleport to the location of another target:
/tp < destination>
To teleport a target to the location of another target:
/tp < victim> < destination>
- x y z is the coordinate to teleport to.
- yRot is optional. It is the y-rotation of the entity after teleportation.
- xRot is optional. It is the x-rotation of the entity after teleportation.
- lookAtPositon is a set of x y z coordinates that the entity will face after being teleported.
- lookAtEntity is the name of a player that the entity will face after being teleported.
- victim is the name of a player to teleport.
- destination is the name of a player to teleport to.
Don’t Miss: Minecraft Cactus Farm Schematic
Example In Ps4 Edition
To fill a 8x1x8 area with bedrock in Minecraft PS4 Edition:
/fill ~-3 ~-1 ~-3 ~4 ~-1 ~4 bedrock 0
To build a solid structure out of polished granite:
/fill ~1 ~0 ~1 ~10 ~10 ~10 stone 2
To build a large hollow dark prismarine structure :
/fill ~1 ~-1 ~1 ~10 ~5 ~10 prismarine 1 hollow
To mine a region, by replacing all blocks in the area with sand starting 7 blocks deep up to ground level , that is 3 blocks away from you in all horizontal directions:
/fill ~-3 ~-7 ~-3 ~3 ~-1 ~3 sand 0 destroy
To replace all grass blocks with diamond blocks in the fill region with a starting coordinate of ~5 ~ ~8 and an ending coordinate of ~-20 ~-1 ~-20:
/fill ~5 ~ ~8 ~-20 ~-1 ~-20 diamond_block 0 replace grass 0
Fill Command In Minecraft Pocket Edition
In Minecraft Pocket Edition , there are 2 syntaxes for the /fill command.
To fill a region with a type of block:
/fill < from> < to> < tileName>
To replace one type of block in a region with another type of block:
/fill < from> < to> < tileName> replace < replaceTileName> < replaceDataValue>
Definitions
- from is the starting x y z coordinate for the fill region .
- to is the ending x y z coordinate for the fill region .
- tileName is name of the block to fill the region.
- tileData is optional. It is the data type or variation of the block if more than one type exists for that tileName.
- replace will replace all blocks in the fill region, including air.
- outline is optional. It will replace blocks on the outer edge of the fill region, but does not replace the inner blocks.
- hollow is optional. It will replace blocks on the outer edge of the fill region, and replaces inner blocks with air.
- keep is optional. It will replace only air blocks in the fill region.
- destroy is optional. It will replace all blocks in the fill region, including air. Replaced blocks will be dropped and can then be collected as if they were mined with a pickaxe or shovel.
- replaceTileName is the name of the block that will be replaced.
- replaceDataValue is the variation of the block to be replaced if more than one type exists for that replaceTileName.
You May Like: How To Make Blue Flames In Minecraft
Using The Locate Command
This command works on all Minecraft versions, such as:
- Console Edition
- Windows 10 Edition
- Education Edition
To use this command, all you have to do is open the chat window and type /locate Village without quotation marks. The command will give you the coordinates to the nearest Village. Now all you need to do is to head over there and start trading.
How Do I Fix The Locate Command In Minecraft

Make sure that you type /locate Village word for word and also make sure that all the letters are properly capitalized. You can also try out /locate Mansion, /locate Stronghold and other commands of the sort to fix the issue. Another great and very common for this solution is to use /gamerule sendCommandFeedback.
Read Also: Minecraft How To Make Beetroot Soup
How To Find Villages In Minecraft
Lee StantonRead more June 19, 2021
Everyone knows that when you find a Village in Minecraft, you ought to rejoice! The Villagers are friendly and often trade with you for valuable items. There are plenty of potential rewards waiting for you when you discover a Village.
If you want to learn more about finding Villages in Minecraft, youve come to the right place. Here, youll learn all you need to become an expert in finding them. Well also cover some questions people ask about the topic.
Minecraft: Using A Biome Finder On Chunk Base
By noting the player’s Minecraft seed number and then heading over to the Chunk Base website, players can locate an application known as the Biome Finder. This application is under the site’s Apps section. Once players click the Biome Finder, they’ll be moved to a page with a map and a few selectors at the bottom of the application. In the bottom-right of the map window, under a text entry field with a checkbox labeled “Filter Biomes,” there should be a drop-down menu with different versions of Minecraft listed. Bedrock players will want to select their appropriate version of Bedrock Edition in the drop-down. Still, this tool can be used for Minecraft’s Java Edition and Pocket Edition players as well.
At the top of the Biome Finder, Minecraft players can enter their seed into the topmost text entry field. Once that has been done, click on the “Find Biomes!” button. The map will then generate a player’s inputted seed, allowing them to zoom in and out and find different biomes generated within. The X and Z coordinates of the Minecraft world are also listed, allowing players to find specific coordinates for biomes they may want to search out. The biomes are labeled in the bottom-right of the map and are color-coded for easy contrast.
Recommended Reading: Minecraft Doomsday Bunker