How To Use The Minecraft Teleport Command
With the Tp command in Minecraft, you can teleport anyone or anything anywhere. If you’re playing the Java version, you can even teleport between the Overworld and the Nether.
Use the Tp cheat the same way you use any other Minecraft cheat:
Enable cheats in your world’s settings.
Open the chat window. How you do this depends on which platform you’re playing on:
Enter the Tp command.
If you entered the command correctly, you will receive a confirmation message and be teleported to the indicated location.
What Is The Easiest Way To Teleport In Minecraft
For an automatic teleporter, place a daylight sensor on the block next to the hinges of the trap door. For a manual teleporter, place a redstone torch on the block next to the trap door. Then, break another block next to the one the redstone torch is on so that another side of the torch block is exposed.
A: How To Travel To Any Location In Minecraft Java Edition
Step 1: Run Minecraft.
Launch the application by clicking on the game file.
Step 2: Select a world to load.
Select a previously created world to load or create a new world. Make sure you are playing in creative mode.
Step 3: Enable cheats.
For the tp command to work you must have cheats enabled. It is recommended that you do this while creating a new world, which will ensure that cheats are active every time you load up this creative world.
If, however, you want to enable cheats on a world that youve already created, open the game menu, click the Open to LAN button, toggle the Allow Cheats option to On, and finally click on the Start LAN World button. Note, however, that you will have to follow this process to turn on cheats each time you load your world.
Step 4: Determine where you want to teleport.
We trust that youve gone over the Coordinates section of this article, or are familiar with coordinates in Minecraft. In order to tp to coordinates, youll need to know where you want to go.
You should know the x, y and z coordinates of the location to which you want to travel, or the player or entity to whose location you want to teleport. If you want to jump to a point relative to where you are, you need to know how far north/south, east/west and up/down from where you are that it is you want to go.
Once you figure that out, youre all set.
Step 5: Open the console.
Step 6: Enter the teleport command.
Eg: /tp < x> < y> < z>
Step 7: Hit enter.
Also Check: Minecraft Outdated Servers
Using The Teleport Command
The first thing you’ll need to do is pull up the command console, which can be done by pressing “/” on PC. This will open a dialogue box that allows you to enter in a variety of commands one of which lets you teleport.
With the command console open, you’ll need to type in “/tp” or “/teleport” to begin the process, followed by the destination you’d like to move to. A variety of options are available, including specific coordinates, relative coordinates, or even the name of another player. For example:
- tp x y x will teleport you to the location on the map with those exact coordinates. Replace each letter with a number that corresponds to your preferred destination. Adding an “~” before a value will change it to a relative position instead of an absolute position.
- tp < destination> will move you to the location of another object or player. Replace < destination> with the name of another player on the server or any other unique ID.< /destination>
- tp < targets> < destination> will send another player on the server to a specific location. For example, you can enter “/tp JohnSmith 200 200 200” to send player JohnSmith to the coordinates 200, 200, 200.
How To Teleport To Another Player On Consoles
In console versions of Minecraft you can teleport to another players location in multiplayer mode by following these steps:
To teleport you must be the player hosting the game.
Also Check: Beetroot Soup Recipe Minecraft
How Coordinates Work In Minecraft
When you enter coordinates in Minecraft, you need to provide three variables: X, Y, and Z:
- X: The X coordinate represents longitude. As the player moves east, the value of X increases. As the player moves west, the value of X decreases.
- Y: The Y coordinate represents elevation. As the player moves up, the value of Y increases. As the player moves down, the value of Y decreases.
- Z: The Z coordinate represents latitude. As the player moves south, the value of Z increases. As the player moves north, the value of Z decreases.
One unit represents one block. Sea level for the overworld is 64Y, and the lava sea level is 11Y. In the Nether, the lava sea level is 31Y.
To display your current coordinates in the Java Edition, press Fn+F3 . In Bedrock Edition, enable Show Coordinates in the world settings.
Replacement For Pressure Plates
Pressure plates only blend in with only gold, iron, stone, and wood planks, but cannot be concealed in any other floor command blocks can be used instead. Pressure plates can be replaced with a command block by using the if argument in the command /execute with a range and a clock circuit. The command /execute if @p will test to see if any players are within a range of 2 . Range 2 is the range a player want for a command block under a floor. Keep in mind that it will produce a globe shaped trigger area , so a range of 2 makes an approximately 5Ã5Ã5 area and a range of 1 makes a 3Ã3Ã3 area . The player can get around this by using the dx, dy and dz arguments.
Alternately the player can specify the x, y and z coordinates in the command but doesnât make sense here. At any rate a range 1 sphere can be buried underground with just the top sticking out, provided the player know no one will be walking through the bottom 2 layers of the globe. Trying this with the non-xyz version of the command would require the command block itself to be embedded in the surface of the floor where it can be seen.
Important note: When writing the code in brackets , do not put spaces between commas , :Do not add / during coding unless instructed to.
Read Also: Minecraft Poison Arrow
Question: What Is The Goal Of Minecraft
Answer: The goal of Minecraft depends on the mode youre playing.
In Survival Mode, your only goal is to survive. This includes finding food, building shelter to safeguard you, your crops, and your livestock from mods, and more.
In Creative Mode, your goals are more flexible. There are no survival functions. Most players use Creative mode to create structures. You have infinite use of blocks, so you can create a variety of different structures.
How Do You Tp To Coordinates
Open the console. Press the / key on your keyboard to do so. Enter the teleport command. Type teleport name x y z into the console, replacing “name” with your username, “x” with the east/west coordinate to which you want to travel, “y” with the vertical coordinate, and “z” with the north/south coordinate.
Read Also: How To Make Luminol In Minecraft
Question: Can Kids Play Minecraft
Answer: Minecraft is recommended for kids aged 8 and up. But parents should make responsible decisions when letting their kids play Minecraft.
Minecraft is an overall appropriate game because it doesnt involve too many adult-only concepts. But the game does have mild violence and is overall a pretty complex game.
There are also other aspects that parents should be wary about, such as playing in multiplayer mode and joining the online community.
What if you think your child is too young to play Minecraft? There are child-friendly alternatives that younger children can play. These games are challenging and still let them express their creativity.
But what if your child wont stop begging for Minecraft and youre still unsure? We recommend buying Minecraft but supervising them. You should also establish certain rules, such as not playing multiplayer mode or only playing with friends .
How To Teleport In Minecraft: The Game Changing Trick
Minecraft is one of the most played games in the world, yet its popularity was very unlikely. For example, did you know the first version of Minecraft was only created in six days? The alpha version was unleashed to the world on May 17, 2009, and the Minecraft frenzy began.
Why is Minecraft so addictive? Players can build a variety of structures, defeat mobs, and undergo a variety of adventures.
Players can also do little-known activities, such as teleporting. Learning how to Teleport in Minecraft is convenient because you can easily go to another location. But there are different teleportation methods and they all vary, depending on your hosting privileges, the Mode youre playing, and even which console youre playing on.
How do you teleport and use the /tp command? Heres how.
Don’t Miss: Minecraft Xbox One How To Play Online
More Commands In Fewer Command Blocks And Recursion
There are several ways to combine groups of commands into just one command.
Use the following sets of commands for recursion:/scoreboard objectives add counter dummy/scoreboard players set target_count counter < target count> /execute if score count counter < target_count counter < chained command> /execute unless score count counter < target_count counter run scorebard objectives remove counter/scoreboard players add count counter 1
To run multiple commands, summon a command-block minecart riding another command-block minecart riding another, with the commands in reverse order, on an activator rail. There are also commands called one-command tool that use this tactic.
Teleporting In Minecraft On Pc
Remembering how to teleport in Minecraft on PC is probably the most difficult, but once youve done it a few times it becomes easy to do. Here are the steps youll need to take:
- Boot up Minecraft on PC.
- Create a world or load one from your saved files.
- Pick a destination youd like to teleport to.
- Press Fn + F3 on your PC to display the coordinates of where you currently are on-screen just below your map. Wed recommend writing them down or take a picture, so you have them saved.
- Then open the in-game console on PC by tapping the / key.
- Now enter the teleport command teleport name x y z, but replace the name with your username.
- Then, replace the x with the east or west coordinate
- Next, replace the y with the number that represents the vertical coordinate.
- Lastly, replace the z with the north or south coordinate
- Press enter.
The numbers should be in the same order that the one you noted down was in. Your console command should look like this: teleport Edge_Lord 2 43 72.
You can teleport to another players location or teleport them to yours by using the console command teleport followed by their username. Its that simple.
Recommended Reading: How To Make A Sheep Upside Down In Minecraft
C: How To Fast Travel In Minecraft On Consoles
Before we get into how to type teleport commands in Minecraft on PS4, Xbox One and Nintendo Switch, you should know that in order to use the teleportation function on consoles you must host a multiplayer world, and you can only teleport to another players location on consoles.
Step 1: Start the game.
Launch the game on your console and click on the Play Game box to start a game.
Step 2: Load a world in Minecraft.
Select a world to load or create a new world. You can choose either creative or survival mode.
Step 3: Enable host privileges.
Go to More Options and check the box on the Host Privileges option. Then load the game. A dialogue box may pop up, informing you of the consequences of loading a game with host privilege that is, achievements and leaderboard updates will be disabled. Click OK to proceed.
Step 4: Bring up the Host menu.
Do this by pressing the options button on the controller.
Step 5: Select the Host Options button.
Step 6: Select the Teleport to Player option.
You should be given a list of all the players in your game world.
Step 7: Choose the player to whose location you wish to teleport.
Choose a player from the list thats displayed to travel instantly to that players location.
How To Teleport In Minecraft On Mobile
The TP command Minecraft is confusing for many people because of its wide variations and how it works differently on diverse platforms. So, lets take a look at the steps that you can use to teleport in Minecraft on your smartphone.
Step 1: Open the Minecraft application and select the world in which you want to play.
Step 2: Tap the top-right corner of the screen to access the pause menu. You may not always see the symbol, but its there.
Step 3: To activate teleportation, go to Settings and toggle the Cheats option.
Step 4: Quit the menu and then select Resume Game.
Step 5: At the top of the screen, click the Chat icon.
Step 6: To acquire your current coordinates for future reference, enter your username into the text box, making sure to replace your username with your Minecraft username. This will not transport you somewhere, but it should display your current coordinates in the command menu.
Step 7: Tap the Chat icon again to bring up the text box, then write /tp to teleport, followed by XYZ. Here, X represents the east/west coordinate, Y indicates the vertical coordinate, and Z shows the north/south coordinate.
Step 8: To teleport your character to the chosen coordinates, use the Enter button.
You May Like: How To Get A Totem Of Undying In Minecraft
How To Teleport Using Commands In Creative Mode
In creative mode you can use cheat commands, so make sure these are turned on in the games settings before jumping into your world. This applies to the Bedrock, Java, and Pocket Edition.
x, y, and z refer to the coordinates on the map where the players character will teleport to. X is the distance east or west of their original position, z is the distance south or north , and y is the height from 0 to 255. .
You can also use ~ or ^ with a number to move to coordinates relative to the players current position.
So ~8 ~ ~- would move the player eight blocks east on the x-axis, remain at the same height on the y-axis and, eight blocks north along the z-axis. ^ movement is based on the direction the player is facing, and then moves them along the left, upward, and forward axis, so ^8 ^ ^-8 would be eight blocks left, no blocks up, and eight blocks backward.
Instead of typing in a specific player name, for example, Steve, you can instead use the following shortcuts to select particular players or objects without needing to know their name.:
Example In Windows 10 Edition
To teleport to the location of TheExcavator in Minecraft Windows 10 Edition:
To teleport the player named DigMinecraft to the location of TheExcavator:
/tp DigMinecraft TheExcavator
To teleport the player named DigMinecraft to coordinates that are 10 blocks East, 3 blocks up, and 4 blocks South of the current position:
/tp DigMinecraft ~10 ~3 ~4
To teleport the nearest player to a specific set of coordinates :
Read Also: Minecraft How To Make Grass Path
Tp Command In Minecraft Xbox One Edition
In Minecraft Xbox One Edition, there are different syntaxes depending on who or where you are teleporting.
To teleport to a set of coordinates:
/tp < x> < y> < z>
To teleport to a set of coordinates facing the direction of another set of coordinates:
/tp < x> < y> < z> facing < lookAtPosition>
To teleport to a set of coordinates facing the direction of a target entity:
/tp < x> < y> < z> facing < lookAtEntity>
To teleport a target to a set of coordinates:
/tp < victim> < x> < y> < z>
To teleport a target to a set of coordinates facing the direction of another set of coordinates:
/tp < victim> < x> < y> < z> facing < lookAtPosition>
To teleport a target to a set of coordinates facing the direction of a target entity:
/tp < victim> < x> < y> < z> facing < lookAtEntity>
To teleport to the location of another target:
/tp < destination>
To teleport a target to the location of another target:
/tp < victim> < destination>
- x y z is the coordinate to teleport to.
- yRot is optional. It is the y-rotation of the entity after teleportation.
- xRot is optional. It is the x-rotation of the entity after teleportation.
- lookAtPositon is a set of x y z coordinates that the entity will face after being teleported.
- lookAtEntity is the name of a player that the entity will face after being teleported.
- victim is the name of a player to teleport.
- destination is the name of a player to teleport to.
How Do You Teleport Back To Your House In Minecraft
If your house has a bed in which you slept at least once without sleeping in any other beds since then, the easiest way for you to get back to your house is by jumping off a cliff in order to die and respawn at the house. You will have to enable Survival Mode temporarily if you’re currently playing in Creative Mode.
Read Also: Brown Dye In Minecraft