Wednesday, September 28, 2022
HomeEditor PicksHow To Tame The Ender Dragon In Minecraft

How To Tame The Ender Dragon In Minecraft

Can You Hatch A Dragon Egg In Minecraft

How To Tame a Ender Dragon in Minecraft Pocket Edition (Ride Dragon Addon)

Unfortunately, there is currently no way to hatch the Dragon Egg in vanilla Minecraft. Sorry to disappoint, but the Dragon Egg really does serve as nothing more than a rare mantle piece that can teleport. Newer players may assume that the Dragon Egg could be used to spawn in a new dragon, similar to the spawn eggs in creative mode, but this isn’t the case.

There is, however, a way to respawn the Ender Dragon.

How To Respawn The Ender Dragon Using His Egg

Players can also re-summon the Ender Dragon after defeating it. To do so, you need to place the egg on top of the bedrock structure and make four End Crystals using a crafting tool. Here’s a recipe to build crystals:

Image credits: Minecraft

Now, go ahead and place all four End crystals around the egg as shown in the picture below:

Image credits: Minecraft

This will repair all the End crystals and regenerate the obsidian towers.

Also Read | How To Earn A Watch In COD Warzone And Modern Warfare Via Call Of Duty: Mobile

Image credits: Minecraft

Summon Command In Minecraft Nintendo Switch Edition

In Minecraft Nintendo Switch Edition 1.16, the syntax to summon an ender dragon using the is:

/summon ender_dragon   
/summon ender_dragon < nameTag>  

In Minecraft Nintendo Switch Edition 1.12, 1.13 and 1.14, the syntax to summon an ender dragon is:

/summon ender_dragon  

In Minecraft Nintendo Switch Edition 1.11.4 and older, the syntax to summon an ender dragon is:

/summon ender_dragon 

Definitions

  • spawnPos is optional. It is the where the ender dragon should spawn. If no coordinate is specified, the ender dragon will spawn in the current location.
  • spawnEvent is optional. It is the name of a game event for the ender dragon. .
  • nameTag is the custom name to assign to the ender dragon. It will appear as a nametag above the ender dragon.

Don’t Miss: How To Get Bonemeal In Minecraft

Summon Command In Minecraft Java Edition

In Minecraft Java Edition 1.11, 1.12, 1.13, 1.14, 1.15 and 1.16, the syntax to summon an ender dragon using the is:

/summon ender_dragon  

In Minecraft Java Edition 1.8, 1.9 and 1.10, the syntax to summon an ender dragon is:

/summon EnderDragon    

Definitions

  • pos or x y z is optional. It is the where the ender dragon should spawn. If no coordinate is specified, the ender dragon will spawn in the current location.
  • nbt or dataTag is optional. It is a compound NBT tag that sets a property for the ender dragon such as or . .

Summon Command In Minecraft Pocket Edition

How to tame ender dragon Minecraft Mod Showcase

In Minecraft Pocket Edition 1.16, the syntax to summon an ender dragon using the is:

/summon ender_dragon   
/summon ender_dragon < nameTag>  

In Minecraft Pocket Edition 1.12, 1.13 and 1.14, the syntax to summon an ender dragon is:

/summon ender_dragon  

In Minecraft Pocket Edition 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 1.9, 1.10 and 1.11, the syntax to summon an ender dragon is:

/summon ender_dragon 

In Minecraft Pocket Edition 1.0, the syntax to summon an ender dragon is:

/summon dragon 

Definitions

  • spawnPos is optional. It is the where the ender dragon should spawn. If no coordinate is specified, the ender dragon will spawn in the current location.
  • spawnEvent is optional. It is the name of a game event for the ender dragon. .
  • nameTag is the custom name to assign to the ender dragon. It will appear as a nametag above the ender dragon.

Recommended Reading: What Does Randomtickspeed Do

Summon Command In Minecraft Ps4 Edition

In Minecraft PS4 Edition 1.16, the syntax to summon an ender dragon using the is:

/summon ender_dragon   
/summon ender_dragon < nameTag>  

In Minecraft PS4 Edition 1.14, the syntax to summon an ender dragon is:

/summon ender_dragon  

Definitions

  • spawnPos is optional. It is the where the ender dragon should spawn. If no coordinate is specified, the ender dragon will spawn in the current location.
  • spawnEvent is optional. It is the name of a game event for the ender dragon. .
  • nameTag is the custom name to assign to the ender dragon. It will appear as a nametag above the ender dragon.

How To Hatch A Dragon Egg In Minecraft

by Gavin Burtt

Beating Minecraft is straight forward enough. You need to open up the End Portal, defeat the Ender Dragon, and enter the portal to reach the credits. Of course, this doesn’t truly end of the game, as you are still free to play in that world, so what do you earn from this? Well, on top of a massive rain of XP, you also earn the Dragon Egg.

As a result of requiring you to beat the final boss, the Dragon Egg is the single rarest item in Minecraft, but what can you do with it? Sure, it makes a cool trophy piece in your home, to show off to your pets that you’ve killed the Ender Dragon, but what else is it used for?

Read Also: How To Craft Stairs In Minecraft

How To Ride And Control It:

To ride the Ender Dragon and . To control the movements of the dragon, you would require a bone, when you hold the bone by looking in any direction, the dragon moves in that direction. To move up, hold a blaze rod in your hand and the dragon would start to move up, to move down or land the dragon down, open up the dragon’s inventory and put the blaze rod in the given Special Slots these special slots might get hidden because of the dragon, but still you can put the rod in it.

Note – remember to take the rod out before flying it again

Flying up using blaze rod:

Special Land down slot :

Dragon Mounts Mod 1102

How to tame and ride the Ender Dragon – Minecraft Bedrock [MCPE, Win10, Console]

Guide:

  • To hatch a dragon egg, youll need to find a good place for it first. If you found one, place the egg block and simply right click it. The egg will then start to hatch, which will take a while.
  • Once grown up, you can tame the dragon with raw fish. It will then follow and protect you like other pets.
  • You can command tamed dragons to lay down or stand up with the bone item.
  • To ride a tamed dragon, use a saddle on it, then right click it without holding an action item.
  • To heal injured dragons, feed it with raw fish, chicken, beef or pork chop or with rotten flesh .
  • You can control the dragon with the Carrot On A Stick while riding it.
  • Breeds:

    There are multiple breeds of dragons in which some take more effort that others. The breeds of dragons are- Ender, Water, Fire, Ice, Ghost, Air, Forest, and Nether.

    Taming:

    In order to tame your dragon you have to wait on its maturing. By the time your dragon has 60 HP total, it is a full grown adult. To tame your matured dragon, you feed it raw fish. To ride your dragon put a regular Minecraft saddle on it by right clicking with the saddle in your hand. You have to tame your dragon before you can ride it. If you try to tame your dragon and it says This dragon is not under your command then your dragon is still too young.

    Cheats:

    Multiplayer:

    Following or Staying:

    How to install:

    Recommended Reading: How To Build A Working Shower In Minecraft

    Tameable Ender Dragon Addon

    This pack allows the player to tame, ride and fly the biggest and strongest mob in the game…Ender Dragon. Once the dragon is tamed, you can fly it around the whole end

    I make many mods/videos like this on my YouTube Channel , subscribing really helps a lot and supports me to make more of these stuff, you can even comment your requests on any of my videos.

    Fighting The Ender Dragon

    Before entering The End to slay the Ender Dragon, you should sleep in a bed near The End portal. If you’re fortunate enough to have any Diamond Armor equipped, you will be much harder to kill. When you first enter The End, you’ll notice Ender Crystals at the summit of several Obsidian Pillars. Ender crystals heal the Ender Dragon as she flies around the island. Your first goal will be to destroy these so it cannot regenerate health. Ender Crystals can be destroyed by arrows, snowballs, or by hand. However, at least two of the Crystals will have Iron Bars surrounding them. Keep in mind if you break an ender crystal while an Ender Dragon is regenerating health, she will take damage.

    Don’t Miss: How To Get Minecraft Mods On Nintendo Switch

    How Do You Tame The Ender Dragon In Minecraft

    Enter dragon can be tamed by feeding it with raw salmon. Ender dragon is attracted towards the player who carries salmon in his hand.

    But before that either you have to go to the end dimension in the game or either summon the ender dragon with the help of summoning command.

    Taming the dragon has many advantages.

    Having been slain, the Ender dragon slowly ascends, her wings and body becoming tattered until she disappears as beams of light emanate from her center. The player gains 12,000 experience points enough to raise the player from level 0 to level 68. Upon completion of the Ender dragon fight , only 500 experience points are lost. As the Ender dragon dies in Java Edition, its tatters fly back to the center. Slain Ender dragons remain where they are killed and crumble into nothingness in Bedrock Edition.

    There are different methods for both the Java Edition and Bedrock edition to tame Ender Dragon.

    Example In Java Edition 19 And 110

    How To Tame a Ender Dragon in Minecraft Pocket Edition ...

    Starting in Minecraft 1.9, a new data tag called was introduced to allow you to select the attack phase for the dragon. Here are a few of the attack phases that you might be interested in.

    To summon an ender dragon that is about to start its attack phase in Minecraft 1.9 and 1.10:

    /summon EnderDragon ~ ~ ~ 

    To summon an ender dragon that is about to perform a breath attack:

    /summon EnderDragon ~ ~ ~ 

    To summon an ender dragon that is about to die and drop experience:

    /summon EnderDragon ~ ~ ~ 

    To summon an ender dragon that is tame:

    /summon EnderDragon ~ ~ ~ 

    Read Also: How To Make Beetroot Stew In Minecraft

    How To Defeat The Ender Dragon In Minecraft

    The common approach of defeating the Dragon is by taking down the towers. You should notice that there are a number of obsidian towers that have beacons on top to heal the Ender Dragon as he flies by. You can either hack these using a sword or just shoot them with the help of a bow and arrow. Once you do that, it will be quite an easy fight and you should be able to take the Ender Dragon down in only a few minutes. You should also note that if youre in Creative, you can defeat it a lot quicker than when youre in Survival mode.

    Also Read | Best Fortnite Players You Should Watch Out For In 2020 | Top 10 Ranked

    How Do You Hatch A Dragon Egg In Minecraft

    Hatching Your Pet Dragon in Minecraft. 1. Hatch the egg. In the old version of the mod, you are required to heat up the egg by placing it in the middle of the magma, but they have changed it recently by playing the egg block on the ground and then right-clicking the item. The egg will hatch and the dragon will appear.

    Read Also: What Is Quick Charge Minecraft

    How Do You Tame The Ender Dragon In Minecraft Java Edition

    In Java Edition, a simple spawn command will bring the ender dragon into your world. Make sure to hit the right position though. And before entering the cheat code, switch the cheat setting on in the settings.

    /summon EnderDragon

    After the cheat code has been entered, the ender dragon will spawn and appear in your world at the location you have entered.

    If the x, y, z position is not entered, then the spawning will happen anywhere. Make sure the position is correct.

    Now once youve summoned the dragon, it may behave hostile towards you. Remain at a distance in the beginning. If the dragon calms down then offer her salmon. She is going to get attracted to you.

    The nature of the dragon quickly changes, once the salmon is offered to her. She will start following the player around and become passive.

    Top 3 Minecraft Mods For Taming Dragons

    How To Tame a ENDER DRAGON in MINECRAFT! (Pet Ender Dragon)

    Dragons are one of the most remarkable creatures to add to Minecraft using mods. Minecraft does have the Ender dragon, but players cannot tame or ride it. It is a hostile boss mob that can be seen in the End dimension.

    Many mods add dragons of different types to Minecraft, but not many of them allow the player to tame them. Taming is a feature using which players can make living entities their pets.

    Recommended Reading: Dolphins Grace Effect

    Ice And Fire: Dragons

    With more than 25 million downloads, Ice and Fire: Dragons is one of the most downloaded dragon mods available on the CurseForge website. It adds beautiful dragons to the game that look very realistic and even better than the Ender dragon.

    Not just dragons but their skeletons, scales and eggs can also be found in this mod. Players can obtain eggs from dragon caves and craft tools, weapons and armor from dragon scales. They can also equip armor to their tamed dragon.

    Minecraft: How To Respawn The Ender Dragon

    Doing this requires placing four Ender Crystals around the edges of the bedrock portal in the End. These crystals can be created by placing an Ender Eye in the center of a crafting table, a Ghast Tear beneath it, and surrounding it with seen glass blocks. Considering you only need four of these, it’s actually fairly cheap to spawn a brand new dragon.

    Unfortunately, another Dragon Egg will not be dropped after the first one. If you were hoping to stock up on Dragon Eggs for a potential future update that gives them some utility, then you’re out of luck. Considering how regularly Minecraft receives updates, even bringing new utilities to old features, it seems inevitable that these Dragon Eggs will be hatchable at some point, so keep your Dragon Egg somewhere safe and don’t let it teleport out of sight!

    If you’re impatient and want to hatch some eggs now, there are plenty of mods available that will allow you to do that. The most popular one, the Dragon Mounts: Legacy mod, will allow you to do exactly that, tame the newly hatched dragons, and ride them.

    Maybe one day, this will be possible in vanilla Minecraft, but keep your trophy somewhere nice until then. Check out our other Minecraft guides here on GameSkinny.

    Read Also: How Do You Make A Trapdoor In Minecraft

    Where Does The Slain Ender Dragon Go In Minecraft Bedrock

    In Java Edition, the slain Ender dragon flies back to the central and tatters into nothingness. In Bedrock Edition, the slain Ender dragon stays where she is slain and tatters into nothingness. After the dragon is slain for the first time, a dragon egg appears above the islands central bedrock structure.

    Taming The Ender Dragon

    TAMING A BABY ENDER DRAGON In MINECRAFT

    I am all for adding dragons to Minecraft, it has kinda a medieval theme to it and all, but adding lots of different dragons seems like a job for mods, so the Ender Drag. Should be tameable, here is what i think the Ender drag. Egg has no use, but only just a trophy, there should be a long and complicated way to hatch it in the normal world. Then after that, you can tame it with chorus fruit and it will be tame like a cat and with a saddle can be ridden.

    Registered User

    Read Also: What Can You Make With Rabbit Hide In Minecraft

    Can You Tame The Ender Dragon In Minecraft

    Ender Dragon is basically the end of Minecraft. Once youve tamed her or maybe killed her, the game is pretty much over. Because Ender Dragon is the boss of all the other mobs, so taming her is not that easy. It breathes fire and can target you with fire from a block away. But with skills and experience, everything can be done in Minecraft.

    A player can tame Ender Dragon in Minecraft. to tame a dragon, she has to be summoned and fed with raw salmon. Ender Dragon gets drawn out to a player holding raw salmon in his hands. Once you have fed her enough raw salmon, you can easily tame it. Ender Dragon spawns as soon as the player arrives in the End dimension.

    Ender Dragon is the final boss in Minecraft and the main antagonist. It is a giant that can spit fire and fly with great maneuverability. And killing it might be a brave thing to do in Minecraft but taming an Ender Dragon seems cooler.

    How To Kill The Ender Dragon In Minecraft

    This article was written by Jack Lloyd. Jack Lloyd is a Technology Writer and Editor for wikiHow. He has over two years of experience writing and editing technology-related articles. He is technology enthusiast and an English teacher.The wikiHow Tech Team also followed the article’s instructions and verified that they work. This article has been viewed 150,948 times.

    This wikiHow teaches you how to kill the Ender Dragon in Minecraft. The Ender Dragon is a boss in The End, which is a world filled with Endermen and other hazards. The Ender Dragon fight consists of two parts: destroying the Ender Dragon’s health-regenerating crystals, and facing the Ender Dragon itself.

    You May Like: Can You Use A Controller On Minecraft Java

    RELATED ARTICLES

    Most Popular