Wednesday, September 28, 2022
HomeExclusiveWhat Is A Cartography Table In Minecraft

What Is A Cartography Table In Minecraft

How Do I Make My Minecraft Map Bigger

Everything About the Cartography Table in Minecraft

To upgrade the size of you map, you need to upgrade your map from Level 0 to Level 1. To do this, add the Level 0 map and 8 more paper to the 3×3 crafting grid. The newly crafted map will now be upgraded to a Level 1 map which is larger than the previous. When you open this map, it won’t be completely filled in.

How Do You Make A 3×3 Map Wall In Minecraft

You can place your Maps on Item Frames to make one big continuous map. Here’s how to make a 3X3 wall map:

  • Make 9 Empty Locator Maps. Follow the instructions in the first section of this article.

  • Make 9 Item Frames. Put 1 Leather in the middle of the Crafting Table and 8 Sticks in the other boxes to make 1 Item Frame.

  • Go to where you want the center of your Map to be. Then, lay 9 solid blocks of any type on top of each other in a 3X3 square.

    Technically, you can make your map wall any size so long as you have enough materials.

  • Use the Item Frames on the blocks to mount them.

  • Equip and use an Empty Locator Map to fill it out, then use the Map on the center Item Frame.

  • Look at the Map in your hands . You’ll see a green dot marking the location of your wall and a white arrow representing your location.

  • Go south to the very edge of the Map, then equip and use another Empty Locator Map and fill it out,

  • Go back to the wall and place the new Map on the bottom-center block.

  • Repeat steps 7-8 for the southeast, southwest, east, west, north, northeast, and northwest to complete your map wall.

  • What Are Explorer Maps

    Explorer Maps are special types of maps which work differently to regular maps. Explorer Maps show an area where there is a rare structure type: either a Buried Treasure, a Woodland Mansion, or an Ocean Monument. The rare structure will always be marked somewhere on the map by an icon.

    Explorer Maps cannot be crafted. To get one, you have to trade Emeralds and a Compass with a Cartography Villager .

    Explorer Maps often show areas far away from the player, but you’ll always be able to see where you are in relation to the map by looking at the player marker. If you’re outside the boundaries of the map, your player marker will be small and appear somewhere on the map border. As you approach, the marker will get larger. Once you pass the map boundary, you’ll begin to explore and fill out the map, just like a normal map.

    Also Check: How To Install Minecraft Mods On Nintendo Switch

    Add The Paper And Planks To Make A Cartography Table

    In the crafting table, add the papers and planks to the grid. You can use any type of wood planks available in the game, including oak, spruce, birch, jungle, acacia, or dark oak wood planks. In this example, we will be using oak wood planks.

    You must add the papers and planks to the grid exactly as shown in the image below. In the 1st row place down 1 paper in the 2nd box and 1 paper in the 3rd box. In the second row place down 1 wood plank in the 2nd box and 1 wood plank in the 3rd box. In the 3rd row place down 1 wood plank in the 2nd box and 1 wood plank in the 3rd box. This is the Minecraft cartography table recipe.

    After you’ve added the items to the crafting grid as described above, you’ll notice a cartography table in the box on the right.

    Heres How To Use A Cartography Table In Minecraft

    How to Make Minecraft Cartography Table

    Minecraft players who have been around for a while but have not returned to the series in quite some time or players just starting out may be more than confused when they go into a Minecraft village and see a cartography table with a villager in front of it. What does it do? How does it work? Not sure where to start on your Cartography Table? We have got you covered.

    Also Check: Minecraft How To Make Poison Arrows

    How To Make And Use Cartography Table In Minecraft

    Maps can be a pretty important aspect of Minecraft if you’re looking to have a good idea of what is going on in your world. To expand what you can do with these, you can utilize the Cartography Table to enlarge, clone, and lock them. We’ll be taking a look at how to make a Cartography Table in Minecraft Survival.

    How To Use A Cartography Table In Minecraft

    Right click on a cartography table to open its UI. Here there are two squares on the left which are the inputs and the square on the right is the output.

    The map name is only present in the Bedrock edition of Minecraft. You can rename the map to simplify what the maps purpose is. The cartography table can also make an existing map larger.

    To make a larger map simply place an already opened map into one of the slots on the left and some paper in the slots as well. Clicking on the output will consume both items on the left and give you a more zoomed out map.

    You can do this up to four times. If you would like to add a locator to the map so you can keep track of where the player is on the map you can do so at a cartography table. Add your existing map to the left slot and add a compass to it.

    Now the map will show you where the player is on the map as well as where they are facing.

    If you are playing on a multiplayer server, the map will also show you the locations of other players as long as they fit on the map. If they do not fit within the boundaries of the map, they will appear at the edges of the map with their own assigned color.

    If you want to ensure no further changes to the map you have made you can do so at a cartographer table. Simply add the map you want to lock and add a glass pane to the slot on the left. Once a map is locked you cannot transform it into a locator map.

    Recommended Reading: Village Path Minecraft

    Do You Know How To How To Use A Cartography Table In Minecraft Here Is How You Can Use The Cartography Table In Minecraft To Modify Your Maps

    The Cartography Table is a block that is used for cloning, expanding, locking, zooming out, adding pointers,… etc. You can also do these things at the crafting table, but it generally will cost you more paper. The Cartography Table is a helpful tool that can help navigate your world.

    Cartography Table in Minecraft

    In this article, we will show you how to obtain and how to use a Cartography Table in Minecraft.

    Cartography Table In Minecraft: All Details Here

    What Does A Cartography Table Do In Minecraft?

    The Minecraft World is way too large to measure. However, there is one way to keep track of your surroundings. And that is to use a map. But to make a map you need a Cartographer. Moreover, to get that you need a Cartography table in Minecraft. A Cartography Table has various roles in Minecraft.

    It helps to make Maps in Minecraft. You can craft simple maps, Locator Maps, And much more. Moreover, theCartography table is also a Job Block for Villagers. This block is easily accessible and really helpful if you know how to use it. The recipe to craft one is also very easy. Let us start from the basics, first.

    Also Check: Coolest Minecraft Banners

    How Do You Make A Compost In Minecraft

    To make a Composter, you will need to place seven of any type of wooden slabs in a U shape on your Crafting Table, leaving the top and middle squares open. You can make wooden slabs by placing three wooden planks in the Crafting Table, along the bottom row. Composters can also spawn in all villages.

    Where To Find A Cartography Table In Creative Mode

    • Java

    Here is where you can find a cartography table in the Creative Inventory menu:

    Platform

    Here is where you can find a cartography table in the Creative Inventory menu:

    Platform

    Here is where you can find a cartography table in the Creative Inventory menu:

    Platform

    Here is where you can find a cartography table in the Creative Inventory menu:

    Platform

    Here is where you can find a cartography table in the Creative Inventory menu:

    Platform

    Here is where you can find a cartography table in the Creative Inventory menu:

    Platform

    Here is where you can find a cartography table in the Creative Inventory menu:

    Platform

    Definitions

    • Platform is the platform that applies.
    • Version is the Minecraft version numbers where the item can be found in the menu location listed .
    • Creative Menu Location is the location of the item in the Creative menu.

    Recommended Reading: How To Paste In Minecraft

    How To Find Underwater Temples In Minecraft

    Like woodland mansions, cartographers will sell you ocean explorer maps. These maps can point you to underwater temples or buried treasure. The maps will be locator maps so you can see which direction you will need to travel and can help you unearth difficult to find locations. Having a cartographer nearby can help give you direction while exploring.

    How To Increase The Size Of The Map

    Cartography Table Minecraft

    You can increase the size of the map by using this block. So if you dont have an empty map before then you can make one by placing 8 papers and 1 compass on a crafting table.

    Now you can open a map by holding it and looking towards the ground.

    Now place this map and a piece of paper on the cartography table to increase the size of the map.

    Now when you hold and use it then you will see a major difference as the map you can see before is now shrinking towards one side to make some extra space.

    This empty space starts to fill when you travel around it.

    Read Also: Minecraft Beacon Sizes

    For Cloning Zooming Out And Locking Maps

    When players make a map, they can see their surrounding areas in the overworld. However, they will notice that the map is quite limited if they walk too far. This is where the table comes in handy, as they can put their maps in and add a paper in the second slot to essentially expand the existing map. Once done, they can further explore a larger area, and it will show on the map.

    If players want to make two identical maps of the same area, they can use this table to simply clone them by adding an existing map and an empty map. Players can either keep one of the maps as a showpiece on an item frame or simply give it to another player in a multiplayer world.

    When players are done exploring the entire map and want to prevent the map from expanding or being updated, they can simply lock it by combining it with a glass pane on the cartography table.

    Bedrock Edition players can even create locator maps by adding an empty map with a compass to this table.

    Working Of Cartography Table

    The Cartography table has a very simple working process. It has various uses. The main purpose is associated with maps, though. Thus the working is divided into different categories, depending upon the use, version of Minecraft, and much more. However, the main uses are Zooming out, Locking a Map, Renaming a Map, Creating Empty Maps, etc.

    As the Cartography table in Minecraft has two slots on the left. And a slot on the right. The left ones are for the material that is to be used in the making of the product. Raw material as you call it. And the product is collected in the right slot.

    So, based upon the raw material and use, here is the list of the uses of the Cartography Table. And the material used in it:-

    • Map + Paper = Zoomed out Map Zooming out of the map
    • Empty Map + Map= Two Identical Maps Coping of a Map

    Recommended Reading: Sugarcane Farm 1.14

    How To Set A Map Marker In Minecraft

    You can mark locations on your Map with Banners. In a Crafting Table, place 6 Wool of the same color in the top rows, then place 1 Stick in the middle of the bottom row.

    Use an Anvil to give the Banner a name, place the Banner on the ground, then use the Map on the Banner. A dot with the name and color of the banner will appear on your Map.

    Minecraft: Using The Cartography Table And The Java/bedrock Edition Differences

    How To Use The Cartography Table In Minecraft

    In addition to finding them in villages, Minecraft players can create their own Cartography Table by using four wooden planks of any type and two pieces of paper as materials in the Crafting Menu.

    Dont worry about matching the planks as any will work, even if they are mixed and matched.

    Once created and placed, players have a few options in the Cartography Tables menu. Below is a list of functions available depending on what is placed in the tables two slots:

    • Map + Paper Expand the map.
    • Map + Empty Map Create a cloned map, which is an exact duplicate of the map placed.
    • Map + Glass Pane Lock the map, preventing any more exploration progress from being made on it. This can be useful when trying to hide certain structures in a multiplayer realm or server.

    Additionally, for Minecraft: Bedrock Edition, the following options are also available:

    • Map + Compass Convert a standard map into a Locator Map, which can indicate the position of other nearby players.
    • Empty Map + Compass Create an empty Locator Map.
    • Paper + Empty Slot Create a standard empty map.
    • Paper + Compass Create an empty Locator Map, giving players some choice in how they form one.

    In addition to its uses for players, Minecraft villagers can convert to the cartography profession by using this block. As a Cartographer, villagers can trade players cartography supplies such as paper, glass panes, and compasses for Emeralds.

    Read More: 5 best mods for The End in Minecraft

    Also Check: Minecraft Dragon Tutorial

    Other Ways To Get A Map In Minecraft

    Maps can be purchased from a Cartographer for 8 Emeralds or found in sunken ships, stronghold libraries, and Cartographer’s chests. To make a Cartographer, put a Cartography Table in front of a villager who doesn’t have an occupation.

    In the Bedrock Edition, there’s an easier way to make Maps using a Cartography Table. Place 1 Paper on the Cartography Table to produce an Empty Map. For an Empty Locator Map, Combine a 1 Paper and a Compass.

    In the Bedrock Edition of Minecraft, enable Starting Map under World Preferences when you create a world, to begin with a Map already in your inventory.

    Using A Minecraft Map Viewer

    If you want to stay within the confines of Survival Minecraft, then map items and Cartography Tables are your only option. But if you’re not averse to using third-party tools, then you might want to use an online Minecraft map viewer to get the best possible view of your world.

    Currently the best map viewer out there is the Chunk Base Seed Map webpage. Just input your Minecraft seed and version number, and you’ll be able to view everything for thousands of blocks around the world spawn point.

    There are also numerous Minecraft mods out there which add minimaps and full-screen maps to the game, much like other games have by default. Probably the most popular such mod is JourneyMap, which gives you a powerful map tool to use both in-game and in a web browser that tracks your location and exploration in real-time.

    Mapping out a world in Minecraft is a time-consuming but eminently satisfying and enjoyable process. If you want to make your Minecraft world pop even more both on paper and on-screen, be sure to check out our guide on the best Minecraft shaders and the best Minecraft texture packs. You might also be interested to hear about the world generation changes that are approaching with the Minecraft 1.18 update.

    More Guides

    Don’t Miss: How To Make A Carved Pumpkin In Minecraft 1.13

    Place The Cartography Table

    To use a cartography table, first, select the cartography table in your hotbar. If you don’t have a cartography table in your inventory, you can quickly make one with a .

    Next, position your pointer on the block where you want to place the cartography table. You should see the block become highlighted in your game window.

    The to place the cartography table depends on the version of Minecraft:

    • For Java Edition , right click on the block.
    • For Pocket Edition , you tap on the block.
    • For Xbox One, press the LT button on the Xbox controller.
    • For PS4, press the L2 button on the PS controller.
    • For Nintendo Switch, press the ZL button on the controller.
    • For Windows 10 Edition, right click on the block.
    • For Education Edition, right click on the block.

    What Does A Cartography Table Do In Minecraft

    30 How To Make A Cartography Table In Minecraft

    Cartography tables can be useful for Minecraft players who prefer to navigate their world via map.

    Though not a commonly used block, cartography tables do have some important uses for those who get easily lost in the Minecraft world. Cartography is defined as the science of map drawing, and that is exactly what cartography tables provide to Minecraft players.

    Maps such as buried treasure maps can be found throughout any given Minecraft world, but before they are written out for players to follow, they must first be created via a cartography table.

    The following is a guide for Minecraft players curious about all things cartography table related.

    Recommended Reading: Cyan Hardened Clay Recipe

    RELATED ARTICLES

    Most Popular