How To Make A Splash Potion In Minecraft

Splash Potion Of Levitation

This splash potion is exclusive to legacy console’s “tumble” minigame and most likely uses the same sprite as the splash potion of leaping. Like other throwable objects in the tumble minigame, the splash potion of levitation destroys blocks upon contact, and additionally, will apply levitation to any player in its range, which can allow them to go back up to higher platforms.

Some Final Steps To Complete The Process

Put the fermented spider on the top of the table and wait for it to brew. When this process is done you will be gifted with three potion of weakness and to turn it into a splash potion of weakness simply add some gunpowder in the slot of ingredients. The bottles are also now throwable. Click right and there you go.

One of the best use of this potion is you can turn a zombie into a normal villager from it.

Ingredients Needed To Make Splash Potion Of Weakness

There are some requirements which are mentioned below. You have to fulfill every requirements to make a splash potion of weakness.

• Fermented Spider Eye
• Gunpowder
• Crafting Table

First we will talk about some settling down basic steps that you need to understand the whole process.

A Fermented Spider Eye requires a brown mushroom, as we all know getting a brown mushroom is quite tough and if you find it easy then there arent any steps harder than getting a mushroom in this article. The making of regular potion of weakness is easier than anything else.

Now about water bottle you have to dig up some sand and smelt it in a furnace. By this process you will get the glass bottles. It will be helpful in order to make water bottle.

Of course you will require the brewing stand. A nether fortress to locate a blaze rod. It is quite tough isnt it?

Whats in it for gunpowder? You must be questioning. Gunpowder is used as a medium to convert the effect potion in splash potion. And a 3×3 crafting table .

You May Like: How To Authenticate To Microsoft Services Minecraft

Minecraft How To Make A Splash Potion Of Weakness

Beat Minecraft mobs faster with the incredibly useful Splash Potion of Weakness

Minecraft is full of mobs and monsters that are a tad hard to fight, regardless of the Minecraft Seed you generate. Even if you have full diamond armor, a Minecraft Shield, and a netherite sword in hand, you could still use an extra hand especially if youre in Minecraft hardcore mode.

This is where you will want a splash potion of weakness. You need one of these bad boys to weaken your opponent so you can easily smite it down with your sword and shield. But like many other craftable items in the game, it can be confusing to make. Heres your quick guide on how to make a Potion of Weakness that will target your enemies.

Once youve made your Splash Potion of Weakness, youll be able to make lots of mob traps and mob farms, even within your very own Minecraft Castle!

How To Make Splash Potion Of Weakness Minecraft

In an essence, the following are the steps to make a splash potion:

• Open the brewing stand to make a Minecraft Splash Potion of Weakness.
• You will require one potion of weakness and one gunpowder in the brewing stand screen option.
• In the brewing stand menu, just put weakness potion in any of the lower boxes.
• Afterward, in the top container, place the gunpowder.
• After youve prepared your potion, click on it to add it to your inventory.

You May Like: Decay Potion

Minecraft How To Make Splash Potion Of Weakness

To make water bottles, you’ll need glass bottles and access to water. To make glass bottles, you’ll need to dig up some sand and smelt it in a furnace. You’ll need a brewing stand to make your potion. Finding a nether fortress to locate a blaze rod is the most difficult part of this move. Your brewing stand is powered by blaze powder. You should have no trouble getting blaze powder if you find a nether fortress with a blaze spawner. To transform impact potions into splash potions, gunpowder is used. To find gunpowder, look for creepers late at night. Do the following steps to make the Splash Potion of Weakness,

Materials Needed For Making A Potion Of Weakness

The brewing stand is the first thing you need. You can make all the potions you need in Minecraft using a brewing stand. You will need at least one glass bottle, but if you plan to make these weak potions in bulk, you will want three glass bottles at a time. A cauldron should also be nearby.

Place your brewing stand and cauldron on the ground. In your hand, take the glass bottles. Your cauldron should have water . You should now have water bottles when you right-click the cauldron with glass bottles in hand.

Normally, Potions of Weakness require nether warts for their bases, but they dont. Starting with a water bottle is a good place to start.

In the bottom three slots of the brewing stand, place your water bottles, and in the top slot, fit a fermented spider eye. Fermented spider eyes can be obtained from mushroom and spider eye mob drops.

The third potion you make should be a Potion of Weakness as soon as your brewing stands finish. However, your work is not yet done. This time were going to make them into Splash Potions of Weakness.

Recommended Reading: What Does The Fletching Table Do

Lingering Splash & Extended Potions

You can add more ingredients to an existing consumable or Splash potion to prolong their effects.

Crafting a Splash Potion

To craft a Splash Potion, you need one Gunpowder, one Blaze Powder, and three Regular Potions i.e., the potion you want to turn to a Splash potion. Say you want to create a Splash Healing Potion. You have to craft a Healing Potion first . You want to create a Splash Potion of Poison? Craft Poison first .

For this example, lets craft a Splash Potion of Poison

• Step 1 Open Brewing Stand

• Step 2 Place one Potion of Poison in each of the three bottom squares
• Step 3 Place one Gunpowder in the top square
• Step 4 Place one Blaze Powder in the top left square

Crafting a Lingering Splash Potion

Lingering Splash Potions are great for maximizing damage. Much like Splash Potions, youll need to craft a Regular Potion first and turn it into a Splash Potion in order to achieve a Lingering Splash Potion. Youll also need one Dragons Breath and one Blaze Powder.

For this example, lets use a Splash Potion of Poison to create a Poison Cloud.

• Step 1 Open Brewing Stand

• Step 2 Place one Splash Potion of Poison in one of the three bottom squares
• Step 3 Place one Dragons Breath in the top square
• Step 4 Place one Blaze Powder in the top left square

And if you decided to play around with deadly mods like, say, a Dragon Minecraft mod you definitely want as many positive potions in your inventory as possible.

How To Make Splash Potion Of Weakness In Minecraft

In order to craft it, youll need two key items: Gunpowder and a Potion of Weakness.

The Potion of Weakness can be crafted if you have the brewing stand, one Water Bottle, and one Fermented Spider Eye. Simply open the brewing stand menu and heat it up by using one Blaze Powder.

Then, put the Water Bottle in one of the bottom flask slots, and add the Fermented Spider Eye in the top slot to begin the crafting process. This will give you a Potion of Weakness.

Gunpowder is pretty easy to obtain, and you can get them off exploding Creepers.

Once you have the items you need, open the brewing stand and again, add Blaze Powder to get things heated up. Put the Potion of Weakness in one of the bottom slots, then add the Gunpowder in the top slot. Start the brewing process, and youll get the Splash Potion of Weakness.

Also Check: What Is The Rarest Animal In Minecraft

Potion Of Weakness Recipe

• Step 1: Gather the ingredients for the recipe
• Step 2: Prepare the brewers stand by adding ingredients
• Step 3: Make a pot of weakened gunpowder and put it in the brewing stand

There is no difference in duration of effect between the regular drinkable potion and the splash potion in Minecraft Java. The converted duration in Minecraft Bedrock is cut down by 1/4 of its original duration.

Its duration is 1:30 in the original potion. The splash potion in the Java Edition lasts also 1:30. However, in Bedrock Edition, the duration will be 1:07.

When Redstone powder is used as the key ingredient in a potion, its duration can be increased. In addition to extending the Potion of Weakness duration, you will extend the duration of the Splash Potion of Weakness as well.

One might be able to brew these potions one by one but that would be inefficient in materials and would take much longer.

Alternatively, you can summon a Splash Potion of Weakness as an entity. Check the entity ID of the potion and use the command if you have Minecraft Console Commands enabled.

When splashing, be careful!

When youre in a bind, these splash potions are indispensable. The splash potion will come in handy when youre being bombarded with enemies and your health is dwindling faster than you can recover. However, be careful not to apply the effects on yourself instead of your enemies when using splash potions. When you do less damage, youll be the one whos benefited.

What Are The Items You Need To Make Splash Potion Of Weakness

To finish the recipe, you’ll only need water bottles and the ingredients for the Potion of Weakness. The potion of weakness has a simpler formula than other potions. It does not necessitate the development of an inconvenient potion as a foundation. Its main ingredient, fermented spider eye, is difficult to make because it necessitates the use of brown mushrooms.

• Fermented Spider Eye

• Crafting table

Read Also: How To Change Gamertag On Minecraft

Thick Splash Potion Using Brewing Stand

Make your way towards the brewing stand and put gunpowder in the upper box and thick potion bottle in the lower box of the brewing stand and wait for a few moments until you get a thick splash potion in place of the thick potion. Add this potion into your inventory to use later.

You can see the thick splash potion in the image below.

Leave a Reply

How To Make Potion Of Weakness

As I have played Minecraft for nearly a decade, I know the exact ways to use any potion wisely.

Among all the Minecraft Potions, potion of weakness stands first in my priority list.

What is a Potion of Weakness in Minecraft?

Weakness Potion is a Minecraft potion when applied, provides a weak effect, reducing the attack damage by 0.5 for 1:30 seconds. Minecrafts weakness potions can be applied to mobs, villagers, and also the player itself.

I am guessing, you may not know how to brew the weakness potion and use it wisely.

Relax. Thats where I am going to help you.

So, open up your Minecraft Brewing Machine and get ready, as I am about to show you everything you need to know about the Minecraft weakness potions.

Quick TIP: Use the Command Block to get any potions in seconds!!!

You May Like: Dark Oak Trapdoor

Splash Potion In Minecraft

Splash Potions are a variant of the Potion in the game which can be thrown by the players to put the effect on a given area.

Related:How to make a Trapped Chest in Minecraft?

Splash Potions are rare to find in Natural generation and only one splash potion of weakness can be found in brewing stands inside a Igloo basement. Other than that, piglins have a chance of giving the players a splash potion of fire resistance when made to trade using a gold ingot.

How To Make Potion Of Poison In Minecraft

• 3. Lingering Potion of Poison

Today, you will learn how to make a Potion of Poison in Minecraft. You can use the table of contents above to navigate quickly.

This guide is part of the Potion Brewing Guides. I recommend you to check two other related guides, the Potion Guide and Brewing Stand Guide.

Be sure to share this with your friends or family if you find this article useful. Sharing buttons are located below the article. Thank you very much.

Also Check: How To Make A Dragon Banner In Minecraft

How To Make A Splash Potion Of Weakness 114

Youtube – Photo by Mengan99

As we have explained before, the steps of how to make a splash potion of Weakness is done at a brewing station. Different from the previous how to make a splash potion of Weakness steps, now we will learn about how to make a splash potion of Weakness that doesn’t need a nether wart to brew it.You will just need water bottles and the ingredients for the Potion of Weakness to finish the recipe. When you’ve made the Potion of Weakness in the Brewing Stand you can add Gunpowder to it to make it a splash mixture of Weakness which will permit you to utilize it to cure villagers. The guide below will describe precisely how to make a Splash Potion of Weakness in Minecraft.

Effects Of Potion Of Weakness

In Minecraft, the player or enemy will lose 4 melee damage after drinking or hitting a Potion of Weakness . It has been changed to 0.5 on Bedrock Edition.

In the Potion of Weakness, there are two durations. The default duration of 30 seconds is set for the effect. The effect can be extended by adding Redstone Dust to the potion in the Brewing Stand, making it last for 4 minutes.

Minecrafts potion of weakness can be used not only in battle with enemies but also in further crafting. How can you help? Combining it with red dust could create a more potent potion of weakness, for example. Whats the difference between the regular and the deluxe versions?

According to your memory, it lasts one and a half minutes, but if you make an enhanced potion, it lasts four minutes. Outside of a battlefield, this brew can also be used in a variety of ways.

It is a fact that when you create a village you need to populate it with inhabitants, but how do you do that? Weakness potions are one of the easiest methods! Using alchemical manipulations, you can turn a zombie resident into an ordinary one.

A weak potion and a golden apple will be needed to perform this action. So, you can create an effect that many players are not aware of. As a result, they lose many opportunities with this potion. Make sure you dont make this mistake! The possibilities of this potion are now clear to you, so act more effectively!

Read Also: What Was The Dragon Banner

Heres How To Make Splash Potion Of Weakness In Minecraft

You will only need water bottles and the ingredients for Splash Potion of Weakness to complete the recipe. Once youve made the Potion of Weakness in the Brewing Stand you can add Gunpowder to it to make it a splash potion of weakness which will allow you to use it to cure villagers.

Fond of villas, palaces and fictional fairy tale? Minecraft is here to keep you hooked and how! Minecraft is a sandbox video game originally created by Markus Notch Persson. It is maintained by Mojang Studios, a part of Xbox Game Studios, which in turn is part of Microsoft. To make a Splash Potion of Weakness, open the brewing stand and place the Potion of Weakness in one of the bottom boxes. Then add the gunpowder to the top box. Then simply move it to your inventory.

What Does This Potion Do

Dont get confused with the regular variant, the Splash of Potion of Weakness in Minecraft can be used on other players and enemies. This will lead them to be afflicted with the Weakness status effect, dealing damage value to be lowered for a short period of time, which is handy when you are in a pinch.

Thats all you must know about how to make the Splash Potion of Weakness and what it does in Minecraft.

You May Like: How To Make A Potion Of Decay In Minecraft

Splash Potion Of Weakness Related Searches

• Splash potion of weakness

Yes, Blaze Powder is required to make the Splash potions.

• Gather the Ingredients for the Splash Potion of Weakness
• Add a the Blaze Powder, Bottle of Water, and Fermented Spider Eye to the Brewing Stand
• Use the Potion of Weakness

Mojang Studios, Double Eleven are the developers of Minecraft Dungeons.

Mojang Studios, Xbox Game Studios are the developers of the game Minecraft Dungeons.

Yes, Gunpowder is required to make Splash potion of weakness.

Yes, Minecraft Dungeon is available for Xbox One.

What The Potion Does

Not to be confused with the regular variant, the Splash Potion of Weakness can be used on other players and enemies in Minecraft.

This will cause them to be afflicted with the Weakness status effect, causing their damage value to be lowered for a short period of time, which is handy when youre in a pinch.

Thats all you need to know about how to make the Splash Potion of Weakness and what it does in Minecraft. Be sure to search for Twinfinite for more tips and information on the game.

Here are a few other guides to get you started:

Don’t Miss: Minecraft Pillager Debuff

How To Make A Thick Splash Potion

Thick splash Potion is a throwable thick potion. It cant be used to brew other potions and has no effects when thrown.

In this Brief Guide we will tell you how to make Thick Splash Potion in Minecraft Survival Mode. To get that, you first need to make a Water Bottle. Then you have to go into the Nether to get Glowstone Dust, and you also need to kill creepers to get Gunpowder and then have to use theBrewing Standto make the required potion.